Zidoo V-12 Remote

  • Trying to set up and use the zidoo v-12 remote. It connects via bluetooth, but the device does not seem to respond to inputs

    any advice on what should be created re: udev rules etc would be most welcome.

  • See if that content works?

  • Alas, tried both and still no response.
    Devie is a chromebox running libreelec, it sees the remote, and connects. But it doesn't want to interact

    bluetoothctl - info
    info 25:04:27:11:28:95
    Device 25:04:27:11:28:95 (public)
    Name: Remote-V12
    Alias: Remote-V12
    Appearance: 0x0180 (384)
    Paired: yes
    Bonded: yes
    Trusted: yes
    Blocked: no
    Connected: yes
    WakeAllowed: yes
    LegacyPairing: no
    CablePairing: no
    UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
    UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
    UUID: Device Information (0000180a-0000-1000-8000-00805f9b34fb)
    UUID: Battery Service (0000180f-0000-1000-8000-00805f9b34fb)
    UUID: Human Interface Device (00001812-0000-1000-8000-00805f9b34fb)
    UUID: Public Key Open Credent.. (0000fff0-0000-1000-8000-00805f9b34fb)
    UUID: Vendor specific (a8253f01-0c51-4000-b84f-1500068fb5a3)
    Modalias: usb:v5A44p5A44d0000
    ManufacturerData.Key: 0x03e0 (992)
    AdvertisingFlags:
    06 .
    Battery Percentage: 0x64 (100)
    hci0 type 7 discovering off
    hci0 type 7 discovering on
    [CHG] Device 35:A0:F5:CC:36:10 RSSI: 0xffffffb3 (-77)
    [CHG] Device 03:3E:33:CF:9F:9E RSSI: 0xffffffb3 (-77)