LE13 Testing for RK3288, RK3328, RK3399, RK3566, RK3568, RK3576, RK3588

dale · September 29, 2026 at 3:00 AM

Hi chewitt is there a way to detect full resolution for monitor with 1920x1280p. In RK3399 LE13 image, 1920x1080p was detected instead, while H618 LE13 could detect full resolution.

**chewitt** · September 29, 2026 at 5:55 AM

dale I'd guess some changes are needed in the kernel. I'm currently up to my neck in Amlogic things but will add it to Claude's worklist once I circle back on Rockchip topics.

Yasai-san · September 29, 2026 at 9:24 AM

Hi chewitt, two RK3399 boot issues I found and fixed on real boards while working on Lakka (which shares the LE Rockchip bootloader setup):
1. NanoPi M4 2GB The 2GB variant uses DDR3 (Samsung K4B4G1646E-BCMA) instead of the LPDDR3 on the 4GB model, so the nanopi-m4 image stops in TPL with "sdram_init: LPDDR3 - 933MHz failed!". Adding a nanopi-m4-2gb entry using the upstream nanopi-m4-2gb-rk3399_defconfig fixes it. Tested on LE master (U-Boot 2026.07). PR: https://github.com/LibreELEC/LibreELEC.tv/pull/11832
2. ROCK 4C+ (V1.41 with different LPDDR4) Same issue as https://forum.libreelec.tv/thread/29774/ : with the mainline TPL there is no UART output at all (confirmed with the current LE master rock-4c-plus image). It boots with the legacy chain (rkbin DDR blob + miniloader + trust, mainline U-Boot proper) using rk3399_ddr_666MHz_v1.30.bin, matching Radxa's statement that the RK3399-T needs the RAM at 666MHz. I added it as a separate "rock-4c-plus-ddr666" board so existing rock-4c-plus users are unaffected. The DDR blob is selected in rkbin/package.mk, next to the RK3328 frequency override. Tested on LE master: boots to Kodi on cold boot and reboot, 4GB RAM. Commit: https://github.com/ShigeakiAsai/L…65eb17339d1cc5e Is this approach acceptable for a PR, or would you prefer something else (e.g. mainline SPL with CONFIG_ROCKCHIP_EXTERNAL_TPL)?

adamosborne83 · October 1, 2026 at 11:28 AM

Apologies, I am sure this is not the correct place to ask,

but will the nightlies work on

Ugoos SK3 powered SoC RK3588S2-DV and 8/128 GB on board

**chewitt** · October 1, 2026 at 11:53 AM

Quote from adamosborne83

Will the nightlies work on Ugoos SK3 powered SoC RK3588S2-DV and 8/128 GB on board?

I don't think so. I've not seen any mention of RK3588S2 support in the upstream kernel (only RK3588/RK3588S). The SoC differences are likely minor, but as there is no u-boot defconfig or board dts in the kernel for that box, LE will want to see those pieces in-place before offering support. NB: AFAIK there is no 8K support for RK3588 at the moment (in the to-do list, but not at the top) and DV will likely require some proper reverse engineering. I wouldn't rush out to buy one just yet.

adamosborne83 · October 1, 2026 at 12:23 PM

Quote from chewitt

I don't think so. I've not seen any mention of RK3588S2 support in the upstream kernel (only RK3588/RK3588S). The SoC differences are likely minor, but as there is no u-boot defconfig or board dts in the kernel for that box, LE will want to see those pieces in-place before offering support. NB: AFAIK there is no 8K support for RK3588 at the moment (in the to-do list, but not at the top) and DV will likely require some proper reverse engineering. I wouldn't rush out to buy one just yet.

Thank You so much for the reply, I will keep my eye on things as I always do.

Cheers again C