[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

now i answer myself, i hope everyone can help with this following issues (after sleeping now 5 hours experinces,,,):

--------i have a complete great working box "KII Pro", i need to clone this box 1:1------

on the box works 8.0.2c-I

i download LibreELEC-S905.arm-8.0-8.0.2c-I.img.gz

put it on my SD card (rufus) , download gxbb_p200_k2_pro.dtb and replace it to dtb.img

libreelec starts, checking/resize storage and reboot, kodi picture starts, the screen goes black and the box shut down (green LED goes Red)

i can start the box new, libreelec/kodi comes, (only the kodi 17.3 Picture) but the box goes shutdown!

When i start this SD card on my working kodi box, a new Kodi starts! with default settings!

Ok, the box is damaged? I have more then one, new Box packed out and start again! The same one, libreelec starts, kodi pictures start, black screen, box goes shutdown itself.

Ok, i see from @sinancetinkaya the Image

LibreELEC-S905.arm-8.2-devel-201710231024-gd562e8e-I.img.gz

i burn it on SD, put right dtb on the SD....starts again on a new Box, that Kodi works! but i cannot use my old settings from 8.0.2c-I, something dont works, and i see i dont have a Lan Port, only WLAN works. I must have LAN. Anyone have a Idea why only WLAN works on this Version?

i have tested a Version wirth 8.9-k, works too, but Kodi 18, and then i must do complete new all addons.

Can anyone help me with my issues?

UPDATE:
i found my failure! I have KII Box with S905D inside!!!

i will test now S905D Images

See pics

afl1, many thx for your Support!

when the info is importent....on the Box are now android 7.1.1

franky644 Are you sure this is a device tree from K2 Pro that has Android on internal memory? This looks 100% like K1 Pro device tree for LE.

Quote from kszaq

franky644 Are you sure this is a device tree from K2 Pro that has Android on internal memory? This looks 100% like K1 Pro device tree for LE.

your´re right, thats LE, now i understand what afl1 need, sorry, i´m new !

I must read how can i emable ssh on android, then comes the dtb, im must now to my work

If you run LE from SD card or USB drive, the command that afl1 gave you will create a backup of Android dtb. You should have Android on internal memory to create this backup.

i´m now not at home, i will have a look tomorrow in the morning. on my table 3 boxes at the moment, one have LE internal.

I will test tomorrow with a complete new box, start with toothpick LE from SD, the go with ssh and put the command.

thats right!?

hmm now i´m at home, startet the box without sd Card, coming Android up.

Startet with SD card - LE 8.9.0.2-K

Go to ssh and put dd if=/dev/dtb bs=256k count=1 of=/storage/backup/KII_proD.dtb

Zip this and posted it here.

äi will check it, thx a lot!

after reading the specs on alibaba/aliexpress/ etc pp, i dont check the real differences from Ki plus/pro and new Kii pro

The most difference i think is DDR III and DDRIV RAM, right? i will check of new KII have a 100 or 1000 LAN

I search for new buying the best for our Experience with DVB included (please with DVB-C)

humm the LAN Speed ist 100....

[ 17.047820@1] libphy: stmmac-0:08 - Link is Up - 100/Full

the first check say all is ok, i can boot a normal Image. @ AFL great work.

Can you help me for the Tvheadend and DVB-C issue? My Brother have german Unitymedia, What must i do?

Quote from afl1

I think the best buy is KI Pro. For tvhheadend setup watch tutorials on youtube.

the setup is no Problem, is on the 8.0.2c and higher DVB-C Support included?

Update: I use the LE 8.0.2c-I image on a new Box (S905D) , start backup from my old S905 (without "D") start Restore and installtointernal, Job finished .

After a restart without Card comes libreelec Screen, on the left side top, and comes

LibreELEC Community Version 8.0.2c-I

..and nothing else, no boot from internal. i use my Backup from the old S905 K2 (S905 without"D")

is it possible that have the Backup wrong dtb or others Informations from old 905 useinside?

guys, this hobby is very strange!

its very hard to find out for Beginners without Support where are the problems.

After Reading the Forum (10 hours or so...) i find one from @afl,

[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

i put this gxl_p231_2g_dvb.dtb in the archiv, and make the steps, and now i can make installtointernal, and it runs!