You mean dtb is important for tuner or for WiFi chip? Can you also please tell me which version of tvheadend should I use with it?
When Kszaq 's build supports internal tuner, what difference does your build offers compared to Kszaq's build?
Tvheadend recommendation is in #1 (pls read release notices). Device tree is box hw description. Both images are nearly identical. In my image is implemented experimental faster channel switching.
I won't be able to check this until the beginning of next month.
The issue for KI Pro internal install is in device tree installation. After the command installtointernal LE running from nand still use android dtb.
For LE running from SD:
LibreELEC:~ # ls /proc/device-tree/
#address-cells chosen i2s_platform rtc
#size-cells codec_io interrupt-controller@2c001000 saradc
I2S codec_mm interrupt-parent scpi_clocks
PCM compatible ion_dev sd
SPDIF cpu_info mali@d00c0000 sdio
aliases cpu_iomap memory@00000000 secmon
amhdmitx cpu_version meson-fb securitykey
aml-sensor@0 cpufreq-meson meson-remote serial@c11084c0
aml_aes cpus meson-vout serial@c11084dc
aml_m8_snd defendkey meson_clk_msr serial@c1108700
aml_nftl deinterlace meson_clock serial@c81004c0
aml_restart dummy mesonstream serial@c81004e0
aml_sha dvb mhu@c883c400 spdif_codec
aml_tdes dvbfe model spicc
amlogic-dt-id dwc2_a name sysled
amlogic-jtag dwc3@c9000000 nand t9015
amlogic-watchdog efuse partitions thermal-zones
amlvecm efusekey pcm_codec timer
amvdec_656in0 emmc pcm_platform timer_bc
amvdec_656in1 ethernet@0xc9410000 picdec tvout
amvenc_avc ge2d pinmux unifykey
amvideocap gpio_keypad pm usb2phy@d0078000
aocec i2c@c1108500 ppmgr usb3phy@d0078080
arm_pmu i2c@c11087c0 psci vdec
audio_data i2c@c11087e0 rdma vpu
bt-dev i2c@c1108d20 reserved-memory wifi
canvas i2c_gpio rngFor LE running from NAND:
LibreELEC:~ # ls /proc/device-tree/
#address-cells codec_io interrupt-controller@2c001000 scpi_clocks
#size-cells codec_mm interrupt-parent sd
I2S compatible ion_dev sdio
PCM cpu_info mali@d00c0000 secmon
SPDIF cpu_iomap memory@00000000 securitykey
aliases cpu_version meson-fb serial@c11084c0
amhdmitx cpufreq-meson meson-vout serial@c11084dc
aml-sensor@0 cpus meson_clk_msr serial@c1108700
aml_aes custom_maps meson_clock serial@c81004c0
aml_m8_snd defendkey mesonstream serial@c81004e0
aml_nftl deinterlace mhu@c883c400 spdif_codec
aml_restart dtv_params model spicc
aml_sha dummy name sysled
aml_tdes dvb nand t9015
amlogic-dt-id dwc2_a partitions thermal-zones
amlogic-jtag dwc3@c9000000 pcm_codec timer
amlogic-watchdog efuse pcm_platform timer_bc
amlvecm efusekey picdec tvout
amvdec_656in0 emmc pinmux unifykey
amvdec_656in1 ethernet@0xc9410000 pm usb2phy@d0078000
amvenc_avc ge2d ppmgr usb3phy@d0078080
amvideocap gpio_keypad psci vdec
aocec i2c@c1108500 pwm vdin0
arm_pmu i2c@c11087c0 rc@c8100580 vdin1
audio_data i2c@c11087e0 rdma vpu
bt-dev i2c@c1108d20 reserved-memory wifi
canvas i2c@c8100500 rng wifi_pwm_conf
chosen i2c_gpio rtcIn NAND version are missing dvbfe and meson-remote -> no internal dvb tuner, no IR controller.
Most likely command for installing dvb in installtointernal isn't correct for nougat:
if [ -f $IMAGE_DTB ] ; then
echo -n "Writing device tree image..."
dd if="$IMAGE_DTB" of="/dev/dtb" bs=262144 status=none && sync
echo "done."
fiafl1, could you please make a johngalt-based image (latest "8.0.2-testing5" seems to be very good), as i prefer nougat's PQ rather than marshmallow's 
Many thanks in advance!
quitroot !
I have managed by using method of afl1
I installed dbt via TWRP using android update and now LE is fully running from NAND.
Unpack following archive to empty SD card.
KI_PRO_twrp3.zip
Put card in box and restart it. If TWRP3 is not starting use toothpick method.In TWRP install from SD card KI_PRO_dtb.zip. Use USB mouse to control TWRP.
I just used "reboot update" from SSH LE
Original remote works !
afl1, could you please make a johngalt-based image (latest "8.0.2-testing5" seems to be very good), as i prefer nougat's PQ rather than marshmallow's
Test build for KI Pro with johngalt kernel from testing5.
LibreELEC-S905.arm-8.0-8.0.2-devel-201706232246-g0b5b72d0-I.img.gz
Don't install it to NAND. There is nougat dtb.
afl1: I installed your build on my kii pro and also the tvheadend as in post 1. Now how do I watch live TV? I am not seeing an option to watch them in libreelec? I even enabled the pvr TV client...
Am I missing something?
Can u pls guide me to watch satellite channels on libreelec?
afl1: I installed your build on my kii pro and also the tvheadend as in post 1. Now how do I watch live TV? I am not seeing an option to watch them in libreelec? I even enabled the pvr TV client...
Am I missing something?
Can u pls guide me to watch satellite channels on libreelec?
Watch on youtube tvheadend tutorial.
Another johngalt kernel test build. Added wp2 dvb driver.
LibreELEC-S905.arm-8.0-8.0.2-devel-201706250710-gc89478b-I.img.gz
Image is build for KI Pro. For other S905 devices you have to replace nougat device tree.
Sorry, logs, debug logs...
dmesg | paste
lsmod
ls /dev
ls /dev/dvb/adap*
LibreELEC:~ # lsmod
Module Size Used by
hci_uart 30150 1
bluetooth 337390 2 hci_uart
6lowpan_iphc 10351 1 bluetooth
dhd 720964 0
cfg80211 365310 1 dhd
ftdi_sio 42489 1
wifi_dummy 806 0
mali 198336 5
amlvideodri 12066 0
videobuf_res 5402 1 amlvideodri
videobuf_core 16491 2 amlvideodri,videobuf_res
videodev 148765 1 amlvideodri
media 25111 1 videodev
dwc_otg 232103 0
fbcon 37495 0
bitblit 4484 1 fbcon
softcursor 1184 1 bitblit
font 7287 1 fbcon
LibreELEC:~ # ls /dev
SYSTEM loop4 tty32
amaudio loop5 tty33
amaudio_ctl loop6 tty34
amaudio_utils loop7 tty35
amhdmitx0 mali tty36
amremote mem tty37
amstream_abuf misc tty38
amstream_hevc mmcblk0 tty39
amstream_mpps mmcblk0p1 tty4
amstream_mpts mmcblk0p2 tty40
amstream_rm mmcblk1 tty41
amstream_sub mmcblk1boot0 tty42
amstream_sub_read mmcblk1boot1 tty43
amstream_userdata mmcblk1rpmb tty44
amstream_vbuf mqueue tty45
amsubtitle net tty46
amvideo network_latency tty47
amvideo_poll network_throughput tty48
amvideocap0 null tty49
aocec ppmgr tty5
audiodsp0 ppp tty50
autofs ptmx tty51
block pts tty52
boot random tty53
bootloader recovery tty54
bsg reserved tty55
btrfs-control rfkill tty56
bus rsv tty57
cache rtc tty58
char rtc0 tty59
console sda tty6
cpu_dma_latency sda1 tty60
crypt serial tty61
data shm tty62
di0 snd tty63
disk stderr tty7
display stdin tty8
dtb stdout tty9
efuse system ttyS0
env tee ttyS1
esm tty ttyUSB0
esm_rx tty0 ttyprintk
fb0 tty1 tv
fb1 tty10 ubi_ctrl
fd tty11 uhid
full tty12 uinput
fuse tty13 uio0
ge2d tty14 unifykeys
gpio_keyboard tty15 urandom
hidraw0 tty16 vcs
hidraw1 tty17 vcs1
hidraw2 tty18 vcs2
hwrng tty19 vcs3
i2c-0 tty2 vcs4
initctl tty20 vcs5
input tty21 vcs6
instaboot tty22 vcsa
ion tty23 vcsa1
kmem tty24 vcsa2
kmsg tty25 vcsa3
log tty26 vcsa4
logo tty27 vcsa5
loop-control tty28 vcsa6
loop0 tty29 video10
loop1 tty3 wifi_power
loop2 tty30 zero
loop3 tty31
LibreELEC:~ # ls /dev/dvb/adap*
ls: /dev/dvb/adap*: No such file or directoryCodeLibreELEC:~ # lsmod Module Size Used by hci_uart 30150 1 bluetooth 337390 2 hci_uart 6lowpan_iphc 10351 1 bluetooth dhd 720964 0 cfg80211 365310 1 dhd ftdi_sio 42489 1 wifi_dummy 806 0 mali 198336 5 amlvideodri 12066 0 videobuf_res 5402 1 amlvideodri videobuf_core 16491 2 amlvideodri,videobuf_res videodev 148765 1 amlvideodri media 25111 1 videodev dwc_otg 232103 0 fbcon 37495 0 bitblit 4484 1 fbcon softcursor 1184 1 bitblit font 7287 1 fbcon LibreELEC:~ # ls /dev SYSTEM loop4 tty32 amaudio loop5 tty33 amaudio_ctl loop6 tty34 amaudio_utils loop7 tty35 amhdmitx0 mali tty36 amremote mem tty37 amstream_abuf misc tty38 amstream_hevc mmcblk0 tty39 amstream_mpps mmcblk0p1 tty4 amstream_mpts mmcblk0p2 tty40 amstream_rm mmcblk1 tty41 amstream_sub mmcblk1boot0 tty42 amstream_sub_read mmcblk1boot1 tty43 amstream_userdata mmcblk1rpmb tty44 amstream_vbuf mqueue tty45 amsubtitle net tty46 amvideo network_latency tty47 amvideo_poll network_throughput tty48 amvideocap0 null tty49 aocec ppmgr tty5 audiodsp0 ppp tty50 autofs ptmx tty51 block pts tty52 boot random tty53 bootloader recovery tty54 bsg reserved tty55 btrfs-control rfkill tty56 bus rsv tty57 cache rtc tty58 char rtc0 tty59 console sda tty6 cpu_dma_latency sda1 tty60 crypt serial tty61 data shm tty62 di0 snd tty63 disk stderr tty7 display stdin tty8 dtb stdout tty9 efuse system ttyS0 env tee ttyS1 esm tty ttyUSB0 esm_rx tty0 ttyprintk fb0 tty1 tv fb1 tty10 ubi_ctrl fd tty11 uhid full tty12 uinput fuse tty13 uio0 ge2d tty14 unifykeys gpio_keyboard tty15 urandom hidraw0 tty16 vcs hidraw1 tty17 vcs1 hidraw2 tty18 vcs2 hwrng tty19 vcs3 i2c-0 tty2 vcs4 initctl tty20 vcs5 input tty21 vcs6 instaboot tty22 vcsa ion tty23 vcsa1 kmem tty24 vcsa2 kmsg tty25 vcsa3 log tty26 vcsa4 logo tty27 vcsa5 loop-control tty28 vcsa6 loop0 tty29 video10 loop1 tty3 wifi_power loop2 tty30 zero loop3 tty31 LibreELEC:~ # ls /dev/dvb/adap* ls: /dev/dvb/adap*: No such file or directory
Sorry, I forgot start wetekdvb service.
Try to do it manually.
Submit following commands a provide me logs.
cat /proc/device-tree/dvb/dev_name
modprobe wetekdvb
lsmod
dmesg | pasteI building and uploading fixed version.
This is log after this commands: QWfe
This is log after this commands: QWfe
And log from submitting commands? Have you got error message after modprobe command?
Edit:
I uploaded fixed version with attempt to start wetekdvb at system boot.
LibreELEC-S905.arm-8.0-8.0.2-devel-201706251249-gc89478b-I.img.gz
Unfortunately, after uploading a new firmware I can not watch tv, there are still jams.
I did an older verse Tvheadend but that does not help.
Please help.
After mdprobe there is Segmentation fault. With new build still no adapters available for play2. And new log: DONZ
