[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro


  • hi afl1 ,thanks for fixing the tuner,no it works perfect.i want to ask you if oscam from libreelec add on is working.if it's working do you have oscam.conf to know that my settings is correct because oscam not working in me.i see the readers from cccam in :8888 port but don't open any channel.


    Oscam config is off-topic for this forum. I think, tutorial for cccam config is violation of forum rules.

  • nevermind,i did it work.one more question,i have installed earthcam from Index of / - repository.xbmchub-x.x.xx.zip,the addon is installed ok but it don't open any of the webcams.do i have to install additional software like mxplayer to make it work?

  • Hi, with the latest HTS Tvheadend 4.1.2478 ~ LibreELEC Tvh-addon v8.1.114, we have lost the IP Blocking Records Tab under Configuration -> Users.

    Wow, it is only happening with Chrome Browser, with IE and Firefox it does show!!

    Please check!

    Edited once, last by vicpro26 (March 17, 2017 at 10:24 PM).


  • Hi, with the latest HTS Tvheadend 4.1.2478 ~ LibreELEC Tvh-addon v8.1.114, we have lost the IP Blocking Records Tab under Configuration -> Users.

    Wow, it is only happening with Chrome Browser, with IE and Firefox it does show!!

    Please check!

    This tab was moved to expert level. Change General->User interface level->Expert.

  • I have found more channel dvbt and dvb-s with v113 than v114.
    Dvbt 650mhz orf I was not able to scan with v114, but with v113 works.
    in Dvb-t missed 4 channels of 118 from 650Mhz mux with "f" firmware and v114, I uninstalled v114 and installed v113 and 650Mhz MUX works, too.
    In dvb-s missed 30 channels with 114 tvheadend, too.


    I made a soft reset in version "f" firmware, after that I installed Tvheadend 8.1.114 and dvb-t and dvb-s scan was ok, and I can switch dvb-t, dvb-s channels, but sometimes I got no signal
    than next channel and back and works again.

    debug.log
    No input source available for subscription "127.0.0.1 [ | Kodi Media Center ]" to channel "xx"

  • Tested. With dvbc anx b (using dvbc option) and atscc it has the same behaviour

    Versions:

    Code
    LibreELEC (community) Version: 8.0.0f-annexB
    LibreELEC git: c3df916ccd7b06fb923e473f7b2c308501498ada
    
    
    
    
    HTS Tvheadend 4.1.2459 ~ LibreELEC Tvh-addon v8.1.11

    SSH output

    Tvheadend output

    Is it also returning infinite times this error only when either atsc or dvbc tuner gets enabled

    Code
    [  603.255042@3] R848: r848_init:
    [  606.252375@3] AVL: avl6862_read_status: Level=32
    [  606.452026@3] AVL: avl6862_read_status: Level=32
    [  606.652200@3] AVL: avl6862_read_status: Level=32
    [  606.852387@3] AVL: avl6862_read_status: Level=32
    [  607.052379@3] AVL: avl6862_read_status: Level=32
    [  607.252448@3] AVL: avl6862_read_status: Level=32
    [  607.452020@3] AVL: avl6862_read_status: Level=32
    [  607.652353@3] AVL: avl6862_read_status: Level=32


    It seems that r848 is trying to tune dvbs or i'm reading useless info?

  • I use LibreELEC-S905.arm-8.0-8.0.0f-I + tvheadend42-8.1.114 + pvr.hts-3.4.19.1
    Dvbs2 & dvb-c signal switch perfect!
    4K channel can not be screenshots and recordings.
    4: 2: 2 video is slow, CPU occupancy is very high.

    Edited once, last by dvb9999 (March 18, 2017 at 9:05 AM).

  • Please tell me who knows what I need to fix, so that I do not get an error when rebooting on my KII-Pro:

    "cp: can't stat '/flash/SYSTEM' : No such file or directory
    *** Error in prepare_sysroot: mount_common: Could not mount /dev/SYSTEM ***
    ### Starting debugging shell… type exit to quit
    ### Sh: can't access tty; job control turned off #"

    I really want to use LibreElec-8, but because of this error it is loaded only with a "toothpick" and it does not turn on from the remote .. Someone has a ready-made Image for the KII-Pro with integrated into it (without the need for replacement) dtb.img ?
    Thank you.


  • Please tell me who knows what I need to fix, so that I do not get an error when rebooting on my KII-Pro:

    "cp: can't stat '/flash/SYSTEM' : No such file or directory
    *** Error in prepare_sysroot: mount_common: Could not mount /dev/SYSTEM ***
    ### Starting debugging shell… type exit to quit
    ### Sh: can't access tty; job control turned off #"

    I really want to use LibreElec-8, but because of this error it is loaded only with a "toothpick" and it does not turn on from the remote .. Someone has a ready-made Image for the KII-Pro with integrated into it (without the need for replacement) dtb.img ?
    Thank you.

    Update android version first and try

  • Thank you. You have dispelled my doubts. It is necessary to refresh the android ..
    [hr]


    Update android version first and try

    Excellent! It helped. After reinstalling the android, LibreElec finally started to load normally

    Edited once, last by prival17 (March 18, 2017 at 8:36 PM).

  • I have to think this is a PVR bug but has anyone had issue in which TVHeadend EPG doesn't close after you push button to switch channel? Channel changes but EPG stays on top.

    Edited once, last by 7up (March 20, 2017 at 5:05 AM).


  • I have to think this is a PVR bug but has anyone had issue in which TVHeadend EPG doesn't close after you push button to switch channel? Channel changes but EPG stays on top.

    I know about this issue. If you start channel with different standard as EPG scan is running, tvheadend is waiting to finish epg and then it switch to channel. Then switching channels is no problem. This week I have a bike camp in Italy, then I'll open case at tvheadend to fix this issue.