[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

Great job! DVB-C also can scan now! Great!

afl1
Is it possible to install in NAND?

Try with,

installtointernal

command

ok, it works
thank you

Fantastic to see internal DVB-T working. Great work !!

Works perfect.

afl1 I'm confused about the wrong remote.conf bundled in the first build of 8.0.0d.
I assume the remote.conf placement directory /etc/amremote
remote.conf posted separately as a fix has 1167B and it is the very same file as in 8.0.0a,b,c, even in older beta6a.
In the first build with the wrong remote.conf it has 1203B, but there is also a correct remote.conf in /flash

In the corrected second build if 8.0.0d the /etc/amremote.remote.conf has 1163B and it still differs from the previous ones and the currently attached one.

On the left is this one
On the right is /etc/amremote/remote.conf from the corrected build
bxwfpq
[code=php]
Line83 0x01 30 #27 #audio <=> 0x01 27 #audio

[/php]

Hi everyone

afl1 => I just bought an cheap PCSC usb smart reader card. And works perfect with OSCam on offcial repo and pcscd-addon 8.1.0 with french official TNTSat Viaccess 6 card with correct info in reader. Thanks again

It's this model (Lindy 42768) => Lindy 42768 Lecteur de cartes USB: Amazon.fr: Informatique. And beware of version of oscam used: I used the version of repo because is as libusb and pcsc addon enabled.

Works perfect.

How far away before we'll be able to use both tuners ?

Why i did not install oscam?

PID USER TIME COMMAND
1 root 0:01 /usr/lib/systemd/systemd
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [kworker/0:0]
5 root 0:00 [kworker/0:0H]
6 root 0:00 [kworker/u8:0]
7 root 0:00 [rcu_sched]
8 root 0:00 [rcu_bh]
9 root 0:01 [migration/0]
10 root 0:00 [migration/1]
11 root 0:00 [ksoftirqd/1]
12 root 0:00 [kworker/1:0]
13 root 0:00 [kworker/1:0H]
14 root 0:00 [migration/2]
15 root 0:00 [ksoftirqd/2]
16 root 0:00 [kworker/2:0]
17 root 0:00 [kworker/2:0H]
18 root 0:00 [migration/3]
19 root 0:00 [ksoftirqd/3]
20 root 0:00 [kworker/3:0]
21 root 0:00 [kworker/3:0H]
22 root 0:00 [khelper]
23 root 0:00 [kdevtmpfs]
24 root 0:00 [netns]
25 root 0:00 [kworker/u8:1]
29 root 0:00 [suspend]
1045 root 0:00 [writeback]
1048 root 0:00 [bioset]
1049 root 0:00 [crypto]
1051 root 0:00 [kblockd]
1065 root 0:00 [khubd]
1084 root 0:00 [devfreq_wq]
1186 root 0:00 [cfinteractive]
1187 root 0:00 [gp_pll]
1189 root 0:00 [kworker/0:1]
1190 root 0:00 [rpciod]
1202 root 0:00 [kswapd0]
1251 root 0:00 [fsnotify_mark]
1272 root 0:00 [nfsiod]
1277 root 0:00 [cifsiod]
1297 root 0:00 [kthrotld]
1377 root 0:00 [NULL_task_for_h]
1378 root 0:00 [cpu_hotplug_gdb]
1379 root 0:00 [cpu_idle_gdbs]
1413 root 0:00 [kworker/0:1H]
1419 root 0:00 [kthread_hdcp]
1431 root 0:00 [irq/250-sd_emmc]
1434 root 0:00 [kworker/3:1]
1437 root 0:00 [irq/249-sd_emmc]
1438 root 0:00 [kworker/u8:2]
1440 root 0:00 [irq/99-sd_in]
1441 root 0:00 [irq/101-sd_out]
1442 root 0:00 [irq/248-sd_emmc]
1444 root 0:00 [kworker/2:1]
1445 root 0:00 [kworker/1:1]
1448 root 0:00 [vmalloc_ion]
1449 root 0:00 [codec_mm_ion]
1450 root 0:00 [carveout_ion]
1457 root 0:00 [ge2d_monitor]
1500 root 0:00 [kthread_h265]
1503 root 0:00 [kthread_di]
1545 root 0:00 [cec_work]
1588 root 0:00 [ipv6_addrconf]
1593 root 0:00 [deferwq]
1597 root 0:00 [mmcqd/0]
1598 root 0:00 [mmcqd/0boot0]
1599 root 0:00 [mmcqd/0boot1]
1600 root 0:00 [mmcqd/0rpmb]
1631 root 0:00 [mmcqd/0]
1666 root 0:00 [dwc_otg]
1669 root 0:00 [dwc_otg]
1684 root 0:00 [kworker/1:2]
1698 root 0:00 [jbd2/mmcblk1p2-]
1699 root 0:00 [ext4-rsv-conver]
1712 root 0:00 [loop0]
1743 root 0:00 [kworker/2:2]
1754 root 0:00 /bin/sh
1756 root 0:00 /usr/lib/systemd/systemd-journald
1760 root 0:00 /usr/bin/rpcbind -f
1776 root 0:00 [kworker/0:2]
2430 root 0:00 /usr/lib/systemd/systemd-udevd
2456 root 0:00 [kworker/u9:0]
2500 root 0:00 [hci0]
2501 root 0:00 [hci0]
2505 root 0:00 [kworker/u9:1]
2506 root 0:00 [kworker/u9:2]
2612 dbus 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
2616 root 0:00 [cfg80211]
2623 root 0:00 /usr/bin/pulseaudio --system
2631 root 0:00 /usr/lib/bluetooth/bluetoothd
2632 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd
2633 root 0:00 /usr/lib/systemd/systemd-logind
2634 root 0:00 /usr/sbin/rngd -f
2643 root 0:00 /sbin/crond -f -S
2653 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf
2671 avahi 0:00 avahi-daemon: running [LibreELEC.local]
2680 root 0:00 /usr/sbin/sshd -D
2697 root 0:00 /usr/bin/wpa_supplicant -u
2708 root 0:00 [kworker/3:2]
2716 root 0:00 /usr/bin/smbd --configfile=/run/samba/smb.conf
2722 root 0:00 /usr/bin/nmbd --configfile=/run/samba/smb.conf
2734 root 0:00 [ksdioirqd/sdio]
2737 root 0:00 [RTW_XMIT_THREAD]
2738 root 0:00 [RTW_CMD_THREAD]
2739 root 0:00 [RTWHALXT]
2742 root 0:22 /storage/.kodi/addons/service.tvheadend42/bin/tvheadend -B -C -u root -g video -c /storage/.kodi/userdata/addon_data/service.tvhe
2758 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs --lircdev /run/lirc/lircd
2765 root 0:48 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd
2827 root 0:00 [kdvb-ad-0-fe-0]
3488 root 0:00 sshd: root@notty
3489 root 0:00 sh -c /usr/lib/openssh/sftp-server
3490 root 0:00 /usr/lib/openssh/sftp-server
3500 root 0:00 [ppmgr]
3501 root 0:00 [threadrw]
3509 root 0:00 sshd: root@pts/0
3510 root 0:00 -sh
3519 root 0:00 ps

tvheadend is the bigger CPU user, not oscam:

TVH ~ 9% of CPU resources
Oscam ~ 1% of CPU resources

regret!
I thought it was used in kI plus

GitHub - joeusercz/tvheadend at extended_cw

This is the source site and I will not compile it

Correct, that is the source code.

Is the issue with scanning channels with internal S2 tuner a software issue or related to S2 tuner being low quality?

It is hoped that future versions can be used simultaneously with S2-C-T.

Awesome, thanks alf1! Might I suggest you update first post in thread comments which says, "scanning is only partially supported, buggy..."