Many thanks, is there particular manual for installing on internal sd for our box, i mean Kii Pro ?
thread-3588.html?highlight=internal flash
But as you stated: "Just got the box" I would personally recommend to get familiar with the box first without the need to do a flash-recovery when something goes bad. But it's just my opinion. You can switch SD card any time you like.
But as you stated: "Just got the box"
Yeah, this is not far first box. B/w Enigma is not a choice, i have DM800/7200, for me Enigma is quit old style and not user friendly, i like KODI and all in one style, channels are in one list all S2/T2 and IPTV from m3u list. So far somehow it works in the LibreELEC but so slow to respond for switching between channels, painful...
Oscam log?
No errors in the oscam log. It must have something to do with the config/interface with tvh. The CS works fine, just pvu is the issue. I'll keep investigating and post here but maybe someone has been down this road already...
I tried the scan with VDR and TVHeadedend for DVB-T
Both don't work.
Please notice that with old libreelec version (7.02) VDR scan was working, but not TVheadend.
If I copy the VDR folder from old installation to the new, I'm able to see channels, but not add it if needed because scan don't find channels. I checked this with a incomplete channel config in both installation. In the old the scan find 5 new channels, in the new no channel found.
Beside, scan is slowest a lot.Can I do something in order to help the fix of this problem?
Test version with different tuner driver (r848a, current version has r848x). With new tuner driver I am able to scan local dvb-t2 mux, the current had no scan data for dvb-t2.
LibreELEC-S905.arm-8.0-devel-7.95.beta6Y-20170216132010.img.gz
Test version with different tuner driver (r848a, current version has r848x)
Thank you, i will try evening, can i use bellow simple update instructions:
The simplest upgrade:
- create new SD card;
- from new card copy kernel.img and SYSTEM to the old one.
All config and installation is preserved. If addons are not started upgrade them from repository or zip.
Also, do we need to copy as well SYSTEM.md5 and kernel.img.md5 file ?
Thank you, i will try evening, can i use bellow simple update instructions:
The simplest upgrade:
- create new SD card;
- from new card copy kernel.img and SYSTEM to the old one.
All config and installation is preserved. If addons are not started upgrade them from repository or zip.Also, do we need to copy as well SYSTEM.md5 and kernel.img.md5 file ?
Only those 2 files, md5 is only for your verification.
Sorry, I am not here for your service!!!
Have you read my release notes? USB ports were fixed in 7.90.beta3.
If you have problem to do pvr.hts update ask xbmc team.
Sorry i dont want to offend you, but tried to ask several times, so tried once more, i completly dont understand your reaction. i dont have a problems to update, im asking you why update (not pvr.hts) of tvheadend is necessary once drivers has been changed, never before i have to update tvheadend once drivers have been changed
and yes i read your notes, but usb port upper one next to sd card is still not working, im on latest image, with kIIpro dtb.img attached to image, thats the reason why im asked you that too
Maybe you download a wrong version of dtb.img or you have a fault box. I think that the upper left port work to everyone
Inviato dal mio LG-D802 utilizzando Tapatalk
Maybe you download a wrong version of dtb.img or you have a fault box. I think that the upper left port work to everyoneInviato dal mio LG-D802 utilizzando Tapatalk
have you got kI or kII? would be happy if anyne with kIIpro could confirm that usb port is working before i contact seller
using dtb.img from this link MEGA
as its in post #!1
Yes K2 with this link. I use this port with external dvb-t and work perfectly. Maybe you have a problem in your box (or different hw?!? But I don't think)
Inviato dal mio LG-D802 utilizzando Tapatalk
Sorry i dont want to offend you, but tried to ask several times, so tried once more, i completly dont understand your reaction. i dont have a problems to update, im asking you why update (not pvr.hts) of tvheadend is necessary once drivers has been changed, never before i have to update tvheadend once drivers have been changed
and yes i read your notes, but usb port upper one next to sd card is still not working, im on latest image, with kIIpro dtb.img attached to image, thats the reason why im asked you that too
Tvheadend has no dependency on internal dvb driver. Tvheadend is service dependent on kernel dvb services. Changes in kernel can cause tvheadend upgrade. And finally pvr.hts is tvheadend client deeply dependent on Kodi version.
And about USB ports. For testing I have only KIII box.
Same box as KII Pro only two differences:
1. no internal dvb tuner;
2. ethernet-PHY (KII Pro -IP101GR, KIII - RTL8211)
I double check dbt.img for KII Pro I didn't find any issue:
1. all 4 USB ports are supported, I had connected 2x dvb-t, usb keyboard, usb ssd disk
LibreELEC:~ # lsusb
Bus 001 Device 005: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Bus 001 Device 004: ID 0c45:7300 Microdia
Bus 001 Device 003: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
LibreELEC:~ # lsmod
Module Size Used by
hidp 14969 0
rfcomm 34186 6
hci_uart 21893 1
bnep 11028 2
8021q 18855 0
fuse 79787 3
dhd 711748 0
btsdio 3186 0
bluetooth 243684 35 bnep,hidp,btsdio,hci_uart,rfcomm
6lowpan_iphc 5791 1 bluetooth
cfg80211 360934 1 dhd
wifi_dummy 806 0
amlvideodri 11794 0
videobuf_res 5394 1 amlvideodri
videobuf_core 16475 2 amlvideodri,videobuf_res
rtl2832_sdr 17360 0
videobuf2_vmalloc 5425 1 rtl2832_sdr
videobuf2_memops 1348 1 videobuf2_vmalloc
frame_vector 2702 2 videobuf2_vmalloc,videobuf2_memops
videobuf2_v4l2 11710 1 rtl2832_sdr
videobuf2_core 32154 2 rtl2832_sdr,videobuf2_v4l2
videodev 145861 4 amlvideodri,rtl2832_sdr,videobuf2_core,videobuf2_v4l2
r820t 17249 0
rtl2832 11621 0
avl6862 184157 0
dvb_usb_rtl28xxu 17295 0
dvb_usb_af9015 18045 0
dvb_usb_v2 14342 2 dvb_usb_rtl28xxu,dvb_usb_af9015
rc_core 19005 3 dvb_usb_rtl28xxu,dvb_usb_v2,dvb_usb_af9015
mali 199208 5
aml_fe 4882 0
aml 89948 1 aml_fe
dvb_core 89047 4 aml,rtl2832,aml_fe,dvb_usb_v2
media 20978 3 dvb_usb_v2,videodev,dvb_core
fbcon 37623 0
bitblit 4484 1 fbcon
softcursor 1208 1 bitblit
font 7287 1 fbcon
dwc_otg 230751 0
LibreELEC:~ #
2. wifi OK, connected to box via ssh;
3. bluetooth OK, connected BT keyboard;
4. wired ethernet no connection (different ethernet-phy chip).
....Thanks for you answer, ordered new box, ill test with a clean install tomorrow
Test version with different tuner driver (r848a, current version has r848x). With new tuner driver I am able to scan local dvb-t2 mux, the current had no scan data for dvb-t2.
LibreELEC-S905.arm-8.0-devel-7.95.beta6Y-20170216132010.img.gz
New version does not bring any change, i can't scan any new muxes anymore, with old driver upto me was better, it found atleast half of muxes
afl1 would be any benefit if we would contribute you to buy a K1 Plus Combo ? I was not aware about the box type you own. So I understand you own a KIII with external DVB-S2 or/and T2 tuner. I will happily chip in $10 for a starter.
K1 Plus Combo, DVB-S2 only
btw downgraded to beta5N from beta6a and seems like the frame freeze on channel change do not occur anymore. Needs more testing, but in few hours no freeze. Not sure if I should had use 5N1 since there is no reference to in on the first page, only in the discussion.
New version does not bring any change, i can't scan any new muxes anymore, with old driver upto me was better, it found atleast half of muxes
AGAIN !!!
Pls, report exact versions and dvb (e.g. dvb-t2, dvb-s2, ...) otherwise this info is for nothing.
I tested a new microSD with beta6y, tvh 110 and dvb-t internal (I don't tried dvb-s).
The scan found about 45 ch (with external dvb-t USB about 450 ch) and during the scan I can see in the status that the snr and the sensitivity is about the 50-60%. With the external USB dvb-t and the same TV antenna the sensitivity is 100%.
It's possible that this driver don't amplify/filter correctly the signal?!?
Another thing is that after the mapping if I try to see some channels I can't because I receive message "no signal" and in tvh status I see 60% of sensitivity.
For my K2 Pro and for the internal dvb-t the best version is beta5n. With this one, after a successful scan performed with external dvb-t, I can see well all channels through internal tuner.
Anyway tks for great work!
Inviato dal mio LG-D802 utilizzando Tapatalk
Here is patched binary of oscam for use on K1+ and KII Pro.
Here is patched binary of oscam for use on K1+ and KII Pro.
Is password protected. Difference with old ones?
Inviato dal mio LG-D802 utilizzando Tapatalk
