Minix U9-H freeze on kodi loading page / black screen

Quote from chewitt

risa2000 Interesting. Nice to see the errors are gone. The log also shows Broadcom WiFi is now missing but I suspect that's due to another change I made. Can you update to https://chewitt.libreelec.tv/testing/LibreE…h64-11.80.0.tar and share the boot log to confirm (it should be fixed if I'm right)?

wapvi can you confirm it resolves things for you too?

So are the problems fixed with this version? Are there still any issues specific to the Minix Neo U9-H? I'd still like to start using LibreELEC on my U9-H, but the latest nightly still has the SD card issues as well. Is there anything that still needs to be tested before something like this is merged into the latest releases? I can do testing on my U9-H if necessary

SD card issues appear to be resolved, but I haven't pushed the changes to the main LE repo yet; hence not in nightlies. I'm using a newer kernel than the rest of LE and some breakage in shitty Realtek drivers need to be resolved before I can push the Linux 6.7.0 kernel bump to the main repo. NB: We don't need "testers" we need people that write kernel drivers

Quote from chewitt

SD card issues appear to be resolved

Gave it a shot just for kicks and indeed the boot freeze is gone now.

Unfortunately HD audio pass-thru isn't working... and there is a lot of other minor issues (strange slowdowns, font rendering breaks after some use etc.). Maybe related to the breakage you mentioned... maybe not.

There's been a few reports of missing HD audio but I haven't had time to investigate. There are mentions on other hardware too so perhaps something changed on the Kodi side and not the kernel for once.

risa2000 sent me a box to experiment with and I finally got around to fiddling with it

U-Boot 2024.01 (Mar 08 2024 - 08:27:47 +0000) minix-neo

Model: Minix Neo U9-H
SoC:   Amlogic Meson GXM (S912) Revision 22:a (82:2)
DRAM:  2 GiB
Core:  177 devices, 27 uclasses, devicetree: separate
MMC:   mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
[BL31]: tee size: 0
[BL31]: tee size: 0
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0 
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1:      LibreELEC
Retrieving file: /KERNEL
append: boot=LABEL=BOOT disk=LABEL=DISK quiet systemd.debug_shell=ttyAML0 console=ttyAML0,115200n8 console=tty0
Retrieving file: /meson-gxm-minix-neo-u9h.dtb
## Booting kernel from Legacy Image at 08080000 ...
   Image Name:   
   Image Type:   AArch64 Linux Kernel Image (lzo compressed)
   Data Size:    12582235 Bytes = 12 MiB
   Load Address: 01c80000
   Entry Point:  01c80000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 08008000
   Booting using the fdt blob at 0x8008000
Working FDT set to 8008000
   Uncompressing Kernel Image
   Loading Device Tree to 000000007df30000, end 000000007df3d894 ... OK
Working FDT set to 7df30000

Starting kernel ...

It's not the most stable thing though .. so more experimenting needed.

Hello ! I have a similar problem, trying to install latest Libreelec on a SD card for a Minix Neo U9-H box. As the downloads in this post don't work I have tried the following image: https://chewitt.libreelec.tv/testing/LibreE…inix-u9h.img.gz using LibreELEC.USB-SD.Creator.Win32.exe.

On an USB stick it works fine but when trying to install it on an Sandisk Ultra MicroSD 32GB and on a Sandisk Extreme Pro 64GB it fails. I see the Libreelec splashscreen but the system hangs with an error message "Error in mount_sysroot: mount_common: Could not mount /flash/SYSTEM". I checked the sd cards with h2testw and they have no errors. I've been running Corelec 9.2.8 on these two cards without issue. When the system hangs I am able to access a debugging shell and was able to get the Dmesg attached.

Any advise would be greatly appreciated as the USB stick is kind of slow.

Thanks !

Please try again with https://chewitt.libreelec.tv/testing/LibreE…inix-u9h.img.gz which has a fix for the resize issue included https://github.com/LibreELEC/LibreELEC.tv/pull/8845 - it would be good to confirm this resolves the problem.

Thanks for your Help !

I tried the proposed image but still the same result. Attached the dmesg with this image ...

The error displayed was : "Error in mount_flash: mount_common: Could not mount UUID=0305-4206"

On the previous images I tried using the labels in uEnv.ini but that didn't help neither. I also tried using the UUID found in blinkid ..

Let me know if I can do any thing else to share more info and thanks again for all your efforts in reviving this device !