There is a tethering option available in the LibreELEC settings add-on. This tethering is done via connman
Do you confirm this tethering would bridge the Wi-fi connection to the Ethernet port? I understand it just creates a Wi-fi access point for other devices... Or did I miss something?
that could be true, you may have to edit the connman config file.
cp /etc/connman/main.conf /storage/.config/connman_main.conf
nano /storage/.config/connman_main.confThe settings add-on does not support Ethernet tethering but if you ^ follow the commands lrusak posted you can add ethernet to the list of interfaces tethering is supported on and enable it manually via connmanctl.
That should be all that's required, although it's a couple of years since I tested it. Check the routing tables and such.
If "routing tables" are involved then it is NOT A BRIDGE.
What we need is pure bridging to keep the ethernet and Wifi on the same subnet, not a router in between.
Then connman tethering is not the solution you are seeking, because it shares the Ethernet connection behind NAT and has deiberately has zero config options beyond SSID/Passphrase. If you want a proper bridge either learn how to create that at kernel level or buy a WiFi bridge device. I use some older Apple Airport Express devices for testing when I want to avoid the need for WiFi drivers; they are obsolete and thus rather cheap to find on eBay (the last one I grabbed was $12).
Then connman tethering is not the solution you are seeking, because it shares the Ethernet connection behind NAT and has deiberately has zero config options beyond SSID/Passphrase. If you want a proper bridge either learn how to create that at kernel level or buy a WiFi bridge device. I use some older Apple Airport Express devices for testing when I want to avoid the need for WiFi drivers; they are obsolete and thus rather cheap to find on eBay (the last one I grabbed was $12).
I knew I could use older Airports for connecting a USB printer to a Wireless network , but I suppose I never considered if it would work as a bridge. I have seen them often at Goodwill. Is there a specific model you recommend? I know that some of them probably have 2.4 Ghz only wifi but for my purposes (ethernet printer) that's not an issue. I will be putting it right next to a WIfi connected Kodi box that has an unused ethernet port, such a shame that Libreelec can not truly bridge. Nobody wants a bunch of subnets on a home network.
You would be amazed what you can get from Goodwill if you know what you are buying.
I do not think you can do a real bridge on Libreelec at all. I have done them on other Linux distros , I think Ubuntu.
The idea here however is to get the most out of what you already have. The issue with bridging on many systems come down to hardware and its ability to "bridge" effectively especially when DHCP is required. I know at least one bridge I made worked fine for everything except DHCP which did not bother me, since i was using Fixed IPs already.
>>>>>>>Update
Just bought this for my printer, it was cheap enough: https://www.ebay.com/itm/203968357700
