RPi4 testbuild with HDR support

linuxuser · March 19, 2021 at 4:24 PM

Quote from HiassofT

linuxuser could you please test this build: LibreELEC-RPi4.arm-10.0-devel-20210319162105-f44683e.tar - that should make TrueHD/Atmos available on your TV.
so long,
Hias

Sure give me like 1 hour to return to my home but I used to install img.giz files will the tar problem cause any problems?

linuxuser · March 19, 2021 at 4:35 PM

Quote from HiassofT

linuxuser could you please test this build: LibreELEC-RPi4.arm-10.0-devel-20210319162105-f44683e.tar - that should make TrueHD/Atmos available on your TV.
so long,
Hias

I came sooner than I thought, anyway it works , thank you mate,you did a great job!

**HiassofT** · March 19, 2021 at 7:03 PM

Maschingun thanks a lot for your edid!

Code

  Audio Data Block:
    Linear PCM:
      Max channels: 2
      Supported sample rates (kHz): 192 176.4 96 88.2 48 44.1 32
      Supported sample sizes (bits): 24 20 16
    Linear PCM:
      Max channels: 8
      Supported sample rates (kHz): 192 176.4 96 88.2 48 44.1 32
      Supported sample sizes (bits): 24 20 16
    MAT (MLP):
      Max channels: 8
      Supported sample rates (kHz): 192 96 48
      Supports Dolby TrueHD, object audio PCM and channel-based PCM
      Hash calculation not required for object audio PCM or channel-based PCM
    Enhanced AC-3 (DD+):
      Max channels: 8
      Supported sample rates (kHz): 48 44.1 32
      Supports Joint Object Coding
      Supports Joint Object Coding with ACMOD28
    AC-3:
      Max channels: 6
      Supported sample rates (kHz): 48 44.1 32
      Maximum bit rate: 640 kb/s
    DTS-HD:
      Max channels: 8
      Supported sample rates (kHz): 192 176.4 96 88.2 48 44.1
      Audio Format Code dependent value: 0x03
    DTS-HD:
      Max channels: 8
      Supported sample rates (kHz): 192 176.4 96 88.2 48 44.1
      Audio Format Code dependent value: 0x01
    DTS:
      Max channels: 6
      Supported sample rates (kHz): 96 88.2 48 44.1 32
      Maximum bit rate: 1536 kb/s
    MPEG-H 3D Audio:
      MPEG-H 3D Audio Level: Level 3
      Supported sample rates (kHz): 48
      Supports MPEG-H 3D Audio Low Complexity Profile
  Speaker Allocation Data Block:
    FL/FR - Front Left/Right
    LFE1 - Low Frequency Effects 1
    FC - Front Center
    TpFL/TpFR - Top Front Left/Right
    SiL/SiR - Side Left/Right
    TpBL/TpBR - Top Back Left/Right

Display More

It looks like the TV successfully added speaker allocation map and audio formats from your soundbar. On my LG C8 I only get 2-channel PCM and no speaker allocation block - and I assume that without the soundbar your TV would provide (almost) identical information.

so long,

Hias

linuxuser · March 20, 2021 at 3:18 PM

Quote from HiassofT

linuxuser could you please test this build: LibreELEC-RPi4.arm-10.0-devel-20210319162105-f44683e.tar - that should make TrueHD/Atmos available on your TV.
so long,
Hias

Hi again, I tried to play a dolby atmos movie with 4k and hdr , but once I opened the movie and stopped after 1 minute it suddenly flashed to two frames like it was changing the kodi screen with a black screen every second. And also dts hd is appear as dts and not dts hd (I have other devices that are displayed like dts hd and not just dts) and last but not least when I played a dolby atmos 4k h.265 hdr 8bit video sample, there was am obvious lag (not internet lag but the frames had very low speed per second and it was visible )(the video sample was local displayed and not via internet)

**HiassofT** · March 20, 2021 at 4:41 PM

linuxuser sorry, my crystal ball is currently on repair. Not much we can do without a debug log or a sample to reproduce.

so long,

Hias

linuxuser · March 20, 2021 at 4:47 PM

Quote from HiassofT

linuxuser sorry, my crystal ball is currently on repair. Not much we can do without a debug log or a sample to reproduce.
so long,
Hias

Hi,again could you remind me how can I get a pastebin of the logs for the terminal to paste it here?

Thank you in advance

**HiassofT** · March 20, 2021 at 5:55 PM

Please read the info in our wiki Log Files - LibreELEC.wiki

so long,

Hias

AndreStarTrek · March 21, 2021 at 12:03 PM

I been testing the test builds but I experiencing some problem with color in hdr.

I running rpi4 on a LG OLED55B6V, but wen i play some hdr 4k video the tv go to hdr mode but the colors are faded. But also in hdr mode i have a lot of color bending mostly visible in high whites.

.

Been over the settings of both tv and kodi but I cant seem to find anything. I dont think it is the video but is there a known good video that we can use to test and validate the setup?

I know it is a test build just want to add in to get this working

**HiassofT** · March 21, 2021 at 1:19 PM

AndreStarTrek these are all known issue, scroll back through the thread. Several bits and pieces are still missing in kodi and video driver ATM.

so long,

Hias

AndreStarTrek · March 21, 2021 at 4:54 PM

Quote from HiassofT

AndreStarTrek these are all known issue, scroll back through the thread. Several bits and pieces are still missing in kodi and video driver ATM.
so long,
Hias

That was the first thing i did, but I somehow missed apparently. But good to know it is a known issue.

ThePeePs · March 22, 2021 at 2:03 PM

First of all, thanks for all the hard work everyone has put in on this. For me so far, I've been able to play 4k files w/ most audio formats (Atmos, DTS, DTA-MA, etc).

My one question is... has anyone been able to get 60 Hz/FPS using the the official raspberry pi HDMI cable? It says in their spec sheet for it that it's HDMI 2.0 complaint, but I'm starting to wonder. I've tried connecting my RPi4 to my AVR and directly to my TV, and I'm not able to select 4k@60, and playback of any 4k content that is 60 FPS is slow, and not insync with the audio. Figured I'd ask here before i go and find a new cable on Amazon.

I've added "hdmi_enable_4kp60=1" to my config.txt file, and haven't seen any other lines that relate to 4kp@60 (connected via HDMI 0 on the RPi4)

**JohnWayne111** · March 22, 2021 at 4:20 PM

Quote from ThePeePs

First of all, thanks for all the hard work everyone has put in on this. For me so far, I've been able to play 4k files w/ most audio formats (Atmos, DTS, DTA-MA, etc).
My one question is... has anyone been able to get 60 Hz/FPS using the the official raspberry pi HDMI cable? It says in their spec sheet for it that it's HDMI 2.0 complaint, but I'm starting to wonder. I've tried connecting my RPi4 to my AVR and directly to my TV, and I'm not able to select 4k@60, and playback of any 4k content that is 60 FPS is slow, and not insync with the audio. Figured I'd ask here before i go and find a new cable on Amazon.
I've added "hdmi_enable_4kp60=1" to my config.txt file, and haven't seen any other lines that relate to 4kp@60 (connected via HDMI 0 on the RPi4)

"hdmi_enable_4kp60=1" isnt implemented yet in Beta 1. Maybe Beta 2

ThePeePs · March 22, 2021 at 4:34 PM

Ahhh... ok that explains it. Thanks. I'll wait till Beta 2 to try again

**JohnWayne111** · March 22, 2021 at 4:58 PM

Here the link:

LibreELEC 10.0 B1 on Raspi 4: No Signal when enabling 4kp60

3p0c · March 23, 2021 at 3:10 PM

Quote from HiassofT

linuxuser could you please test this build: LibreELEC-RPi4.arm-10.0-devel-20210319162105-f44683e.tar - that should make TrueHD/Atmos available on your TV.
so long,
Hias

Hello HiassofT,

Does this build is also able to manage HDR in addition to Atmos ?

Thank you

**HiassofT** · March 23, 2021 at 4:52 PM

Yes - although I don't recommend using this build any longer, all changes are now in our nightly builds Index of / - if you don't get atmos passthrough with the official 10 beta1 version, use the latest nightly.

so long,

Hias

linuxuser · March 23, 2021 at 4:57 PM

Quote from 3p0c

Hello HiassofT,
Does this build is also able to manage HDR in addition to Atmos ?
Thank you

yes it does, i tried it

linuxuser · March 23, 2021 at 4:59 PM

Quote from HiassofT

Yes - although I don't recommend using this build any longer, all changes are now in our nightly builds Index of / - if you don't get atmos passthrough with the official 10 beta1 version, use the latest nightly.
so long,
Hias

should i keep using it or use the latest nightly?