TVHeadend should put recordings on a NAS File

Hallo Zusammen,

Dank Covid19 wollte ich mich meiner Herausforderung stellen (hab ja nun Zeit). Leider bekomme ich es ohne Hilfe nicht hin.

Ich habe eine NSA325-v2 und TVheadend (auf Rasperry 3b) soll hier in einem Ordner die Aufnahmen ablegen.

Was habe ich schon gemacht:

Ich bin nach dieser Anleitung

Mount LibreElec » permanent ein Netzwerklaufwerk mounten

vorgegangen und habe die Datei storage-recordings.mount erstellt.

[Unit]

Description=Aufnahmepfad zur NAS

Requires=network-online.service

After=network-online.service

# Before=kodi.service

[Mount]

What=//192.168.178.57/video/recordings

Where=/storage/recordings

Options=username=admin,password=9999

Type=cifs

[Install]

WantedBy=multi-user.target

Ich bekomme aber diesen Fehler:

● storage-recordings.mount - Aufnahmepfad zur NAS

Loaded: loaded (/storage/.config/system.d/storage-recordings.mount; enabled; vendor preset: disabled)

Active: failed (Result: exit-code) since Tue 2020-03-24 17:31:48 CET; 27min ago

Where: /storage/recordings

What: //192.168.178.57/video/recordings

Mar 24 17:31:48 LibreELEC systemd[1]: Mounting Aufnahmepfad zur NAS...

Mar 24 17:31:48 LibreELEC mount[448]: mount: mounting //192.168.178.57/video/recordings on /storage/recordings failed: Host is down

Mar 24 17:31:48 LibreELEC systemd[1]: storage-recordings.mount: Mount process exited, code=exited status=255

Mar 24 17:31:48 LibreELEC systemd[1]: storage-recordings.mount: Failed with result 'exit-code'.

Mar 24 17:31:48 LibreELEC systemd[1]: Failed to mount Aufnahmepfad zur NAS.

In den Einstellungen bei Libeelec habe ich Samba aktiviert und als niedrigstes Protokoll 1 und höchstes 3 angegeben. Gleicher Fehler.

Über Windows sieht die Adresszeile im Explorer so aus \\192.168.178.57\video\recordings

Ich hoffe Ihr könnt mir hier helfen, vielen Dank schon mal dafür und bleibt gesund.

Holger

PS Ich nutze Putty um auf den Rasperry 3b zu kommen

So I try again,

Hello everybody,

Thanks to Covid19 I wanted to face my challenge (now I have time). Unfortunately, I can't do it without help.

I have an NSA325-v2 and TVheadend (on Rasperry 3b) should put the recordings here in a folder.

What have I already done:

I followed these instructions

Mount LibreElec » permanent ein Netzwerklaufwerk mounten

and created the file storage-recordings.mount

[Unit]

Description=Aufnahmepfad zur NAS

Requires=network-online.service

After=network-online.service

# Before=kodi.service

[Mount]

What=//192.168.178.57/video/recordings

Where=/storage/recordings

Options=username=admin,password=9999

Type=cifs

[Install]

WantedBy=multi-user.target

But "systemctl status storage-recordings.mount" output says:

● storage-recordings.mount - Aufnahmepfad zur NAS

Loaded: loaded (/storage/.config/system.d/storage-recordings.mount; enabled; vendor preset: disabled)

Active: failed (Result: exit-code) since Tue 2020-03-24 17:31:48 CET; 27min ago

Where: /storage/recordings

What: //192.168.178.57/video/recordings

Mar 24 17:31:48 LibreELEC systemd[1]: Mounting Aufnahmepfad zur NAS...

Mar 24 17:31:48 LibreELEC mount[448]: mount: mounting //192.168.178.57/video/recordings on /storage/recordings failed: Host is down

Mar 24 17:31:48 LibreELEC systemd[1]: storage-recordings.mount: Mount process exited, code=exited status=255

Mar 24 17:31:48 LibreELEC systemd[1]: storage-recordings.mount: Failed with result 'exit-code'.

Mar 24 17:31:48 LibreELEC systemd[1]: Failed to mount Aufnahmepfad zur NAS.

In the settings at Libeelec I activated Samba and specified the lowest protocol 1 and highest 3. Same mistake.

In Windows, the address line in Explorer looks like this: \\192.168.178.57\video\recordings

I hope you can help me here, thank you in advance.

Holger

Hardware

Rasperry 3b (as Server)

Digibit R1

Software

Libreelec (official) 9.0.2 (kernel: Linux 4.19.36)

Kodi 18.2

Tvheadend Version 4.2.7-44 (LibreELEC Tvh-addon v9.0.118(HTSP v27))

Putty

Hello and Thanks,

I tried it, but it ditn't work.

There is no recording on my NAS.

Hi,

I have only find the samba.conf.sample nothing else.

I use --> Libreelec (official) 9.0.2 (kernel: Linux 4.19.36)

Have a nice day.

# SPDX-License-Identifier: GPL-2.0-or-later

# Copyright (C) 2009-2016 Stephan Raue (stephan@openelec.tv)

# Copyright (C) 2017-present Team LibreELEC (LibreELEC – Just enough OS for KODI)

# samba.conf v4 (do not remove)

# This configuration file allows you to customize the samba shares

# available from your machine

[global]

server string = LibreELEC

browseable = yes

writeable = yes

printable = no

deadtime = 30

mangled names = no

name resolve order = host bcast

printcap name = /dev/null

load printers = no

encrypt passwords = true

enable core files = no

passdb backend = smbpasswd

smb encrypt = disabled

fruit:model = Xserve

# samba share options

map to guest = Bad User

guest account = root

security = user

# samba tuning options

socket options = TCP_NODELAY IPTOS_LOWDELAY

min receivefile size = 16384

aio read size = 16384

aio write size = 16384

use sendfile = yes

# The following are default values for the master selection process

# local master = yes

# preferred master = auto

# domain master = auto

# os level = 20

# "strict allocate = yes" breaks large network transfers to external hdd

# Force this to "no" in case "yes" becomes the default in future

strict allocate = no

allocation roundup size = 0

# Using the following configurations as a template allows you to add

# writeable shares of disks and paths under /storage

[Update]

path = /storage/.update

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/.update

[Videos]

path = /storage/videos

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/videos

[Music]

path = /storage/music

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/music

[TV Shows]

path = /storage/tvshows

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/tvshows

[Recordings]

path = /storage/recordings

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/recordings

[Downloads]

path = /storage/downloads

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/downloads

[Pictures]

path = /storage/pictures

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/pictures

[Emulators]

path = /storage/emulators

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/emulators

[Configfiles]

path = /storage/.config

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/.config

[Userdata]

path = /storage/.kodi/userdata

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/.kodi/userdata

[Screenshots]

path = /storage/screenshots

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/screenshots

[Logfiles]

path = /storage/logfiles

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/logfiles

root preexec = createlog

[Backup]

path = /storage/backup

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/backup

[Picons]

path = /storage/picons

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/picons/tvh /storage/picons/vdr

Hi,

it is DHCP but the router give one Itim an IP Adress and than it is static. I have from every pc write and read rights to this File (NAS) also without username and password (from Homenetwork). Both Libreelec and the NAS are in the same WORKGROUP. The NAS is always power on.

Why do I have no samba.conf or smb.conf but I see in Windows Network the Libreelec and the files - Backup - Configfiles - Downloads -Emulators - Logfiles - Music - Picons - Pictures - Recordings (empty not the file on NAS) - Screenshots - sda1-usb-... - TV Shows - Update - Userdata - Videos -

With Kodi I able to see all movies on NAS (via SMB Windows Network).

I change the storage-recordings.mount

[Unit]

Description=Aufnahmepfad zur NAS

Requires=network-online.service

After=network-online.service

Before=kodi.service

[Mount]

What=//NSA325-V2/video/recordings

Where=/storage/recordings

Options=username=admin,password=9999,rw,vers=2.1

Type=cifs

[Install]

WantedBy=multi-user.target

But systemctl status storage-recordings.mount says

● storage-recordings.mount - Aufnahmepfad zur NAS

Loaded: loaded (/storage/.config/system.d/storage-recordings.mount; enabled; vendor preset: disabled)

Active: failed (Result: exit-code) since Thu 2020-03-26 15:23:41 CET; 1min 55s ago

Where: /storage/recordings

What: //NSA325-V2/video/recordings

Mar 26 15:23:41 LibreELEC systemd[1]: Mounting Aufnahmepfad zur NAS...

Mar 26 15:23:41 LibreELEC mount[440]: mount: mounting //NSA325-V2/video/recordings on /storage/recordings failed: Host is down

Mar 26 15:23:41 LibreELEC systemd[1]: storage-recordings.mount: Mount process exited, code=exited status=255

Mar 26 15:23:41 LibreELEC systemd[1]: storage-recordings.mount: Failed with result 'exit-code'.

Mar 26 15:23:41 LibreELEC systemd[1]: Failed to mount Aufnahmepfad zur NAS.

Good morning,

I've create an samba.conf (OK I renamed only the sample.conf).

Here my samba.conf

# SPDX-License-Identifier: GPL-2.0-or-later

# Copyright (C) 2009-2016 Stephan Raue (stephan@openelec.tv)

# Copyright (C) 2017-present Team LibreELEC (LibreELEC – Just enough OS for KODI)

# samba.conf v4 (do not remove)

# This configuration file allows you to customize the samba shares

# available from your machine

[global]

server string = LibreELEC

browseable = yes

writeable = yes

printable = no

deadtime = 30

mangled names = no

name resolve order = host bcast

printcap name = /dev/null

load printers = no

encrypt passwords = true

enable core files = no

passdb backend = smbpasswd

smb encrypt = disabled

fruit:model = Xserve

# samba share options

map to guest = Bad User

guest account = root

security = user

# samba tuning options

socket options = TCP_NODELAY IPTOS_LOWDELAY

min receivefile size = 16384

aio read size = 16384

aio write size = 16384

use sendfile = yes

# The following are default values for the master selection process

# local master = yes

# preferred master = auto

# domain master = auto

# os level = 20

# "strict allocate = yes" breaks large network transfers to external hdd

# Force this to "no" in case "yes" becomes the default in future

strict allocate = no

allocation roundup size = 0

# Using the following configurations as a template allows you to add

# writeable shares of disks and paths under /storage

[Update]

path = /storage/.update

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/.update

[Videos]

path = /storage/videos

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/videos

[Music]

path = /storage/music

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/music

[TV Shows]

path = /storage/tvshows

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/tvshows

[Recordings]

path = /storage/recordings

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/recordings

[Downloads]

path = /storage/downloads

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/downloads

[Pictures]

path = /storage/pictures

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/pictures

[Emulators]

path = /storage/emulators

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/emulators

[Configfiles]

path = /storage/.config

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/.config

[Userdata]

path = /storage/.kodi/userdata

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/.kodi/userdata

[Screenshots]

path = /storage/screenshots

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/screenshots

[Logfiles]

path = /storage/logfiles

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/logfiles

root preexec = createlog

[Backup]

path = /storage/backup

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/backup

[Picons]

path = /storage/picons

available = yes

browseable = yes

public = yes

writeable = yes

root preexec = mkdir -p /storage/picons/tvh /storage/picons/vdr

If I shut down the NAS here the error message:

● storage-recordings.mount - Aufnahmepfad zur NAS

Loaded: loaded (/storage/.config/system.d/storage-recordings.mount; enabled; vendor preset: disabled)

Active: failed (Result: exit-code) since Fri 2020-03-27 08:30:09 CET; 2min 55s ago

Where: /storage/recordings

What: //NSA325-V2/video/recordings

Mar 27 08:30:03 LibreELEC systemd[1]: Mounting Aufnahmepfad zur NAS...

Mar 27 08:30:09 LibreELEC mount[423]: mount: mounting //NSA325-V2/video/recordings on /storage/recordings no route to host

Mar 27 08:30:09 LibreELEC systemd[1]: storage-recordings.mount: Mount process exited, code=exited status=255

Mar 27 08:30:09 LibreELEC systemd[1]: storage-recordings.mount: Failed with result 'exit-code'.

Mar 27 08:30:09 LibreELEC systemd[1]: Failed to mount Aufnahmepfad zur NAS.

If the NAS is on the error message is again "failed: Host is down"

I've also change

[Mount] 

What=//192.168.178.57/video/recordings 

Where=/storage/recordings

and

[Mount] 

What=//192.168.178.57/video/recordings/

Where=/storage/recordings/

and

[Mount] 

What=//192.168.178.57/Volume1/video/recordings 

Where=/storage/recordings

my last change

[Mount] 

What=//192.168.178.57/Volume1/video 

Where=/storage/video

but nothing works

Yes I restart the Raspery after each change