You need to run "lsusb | paste" via SSH and share the URL generated so we can see what chipset is in the box as the website has no useful info.
sorry for delay
could you pls post dmesg | paste
sorry for delay
could you pls post dmesg | paste
Hi! Thank you for your reply 
I'll post that info as soon as I get home! 
Thank you very much
Here goes the link for the "dmesg | paste":
WDHd
Thank you 
The problem is you card didn't have an proper id so it won't be detected by default.
Here is a list of valid choices for the card=<n> insmod option: card=0 -> Unkno - Pastebin.com
So you have to set your card manual. I am not too sure how this works.
/storage/.config/modprobe.d/ create an file em2820.conf
in this file pls add
options em2820 card=5
or use this command from shell
echo "options em2820 card=5" >/storage/.config/modprobe.d/em2820.conf
if this is not working after reboot pls another dmesg
Hi CvH!
Once again, thank you for your help.
I did what you suggested but the result seems to be the same :s After reboot, this is the result of the dmesg (which for me seems the same, still unable to detected the correct id):
iaaO
Thanks
oh mixed something up .. ups
echo "options em28xx card=5" >/storage/.config/modprobe.d/em28xx.conf
it is em28xx and not em2820
pls change filename and options
I deleted the file created before "/storage/.config/modprobe.d/em2820.conf" and created the new one, like you said.
Now the card seems to be corretly detected :
RZWf
However, the card is still not listed on TvHeadend in "Configuration > DVB Inputs".
Any ideas why?
Thank you
can't really tell you something, pls try with card number "1" - at least the device id is listed for this number, but honestly no idea
I also found 26 a possible number (in some thread), you can check here 6.5. EM28xx cards list — Linux Media Subsystem Documentation documentation and try the numbers for em2820.
Change number, reboot, also pls make sure that you try to disable and enable Tvh after you start it - maybe the device is slow and you need to check in the tvh settings wait for dvb device.
after boot do this
systemctl stop service.tvheadend42.service
systemctl start service.tvheadend42.service
then you can test it
Thank you very much! I'll try all possible card number for em2820 and then I'll give you some feedback!
Hi CvH!
I did what you suggested, infortunately with no luck 
I tried every card number that was mentioned in the list you referred (6.5. EM28xx cards list — Linux Media Subsystem Documentation documentation) as em2820. So I went through the painful process of trying each card number, and they were quite a lot (1,2,3,4,5,9,12,14,24,25,26,27,28,30,58,6162,65,71) 
For each card number I did:
1) Change the conf file: "echo "options em28xx card=X" >/storage/.config/modprobe.d/em28xx.conf" (where X stands for the card number of the corresponding try)
2) Rebooted the system: "reboot"
3) Stopped the TvHeadEnd service: "systemctl stop service.tvheadend42.service"
4) Started the TvHeadEnd service: "systemctl start service.tvheadend42.service"
5) Acessed the TvHeadend page (ip:9981), and checked for tv adapters in "Configuration > DVB devices"
For each try I also checked the result of the dmesg command, and I concluded that the system was correctly assuming the card number that I explicitely indicated in the conf file.
I honestly don't know what else to try, or if I'm doing anything wrong. Do you have any other suggestions? I hope I gave enough detail. If not, please say so.
Many thanks.
you done it right, i guess, i ask a dvb dev if he knows if we did something wrong (my knowledge about this is just google so don't expect too much)
you done it right, i guess, i ask a dvb dev if he knows if we did something wrong (my knowledge about this is just google so don't expect too much)
Thank you very much. Meanwhile, I'll keep trying and searching for others options.
Good night!
After all this time I'm still struggling with this
Can anyone please give an help?
Thanks
