Hi, I have a Vigica 100S witch is the same as a Venz K1 and tried all S805 images without success, can anyone give me some lights or have any Libreelec image working on this box?
I can run Vtimod 2.1 Openelec on it, so I was thinking if is possible just to replace for Librelec if none of the images can work?
Thanks.
I have a Vigica 100S witch is the same as a Venz K1 and tried all S805 images without success
You might want to elaborate what "without success means" ?
Did your box explode or maybe catch fire ?
I am putting humour into this as i think you must understand we cannot read between lines.
I don't like your chances of the tuner working in LE but a little more info would be good. 
With mk808b+ (OTG port) MCE remote works fine:
dmesg
[ 260.794438@0] Indeed it is in host mode hprt0 = 00041901
[ 260.974408@0] usb 2-1: new low-speed USB device number 3 using dwc_otg
[ 260.975983@3] Indeed it is in host mode hprt0 = 00041901
[ 261.098046@0] [amlogic] ##### cec write error! #####
[ 261.182124@0] usb 2-1: New USB device found, idVendor=0471, idProduct=0613
[ 261.182283@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 261.182391@0] usb 2-1: Product: MCE USB IR Receiver- Spinel plus
[ 261.182491@0] usb 2-1: Manufacturer: PHILIPS
[ 261.222954@0] input: PHILIPS MCE USB IR Receiver- Spinel plus as /devices/lm0/usb2/2-1/2-1:1.0/input/input4
[ 261.231710@1] hid-generic 0003:0471:0613.0005: input,hiddev0,hidraw0: USB HID v1.00 Keyboard [PHILIPS MCE USB IR Receiver- Spinel plus] on usb-lm0-1/input0
[ 261.251169@1] WARNING: You are using an experimental version of the media stack.
[ 261.251169@1] As the driver is backported to an older kernel, it doesn't offer
[ 261.251169@1] enough quality for its usage in production.
[ 261.251169@1] Use it with care.
[ 261.251169@1] Latest git patches (needed if you report a bug to [email protected]):
[ 261.251169@1] 009a620848218d521f008141c62f56bf19294dd9 [media] cec: always check all_device_types and features
[ 261.251169@1] b7cbc892532316f2abd880186301e57239a17f28 [media] cec: poll should check if there is room in the tx queue
[ 261.251169@1] 83505028d859bcbb69691aabade9dc633e5b74ea [media] vivid: support monitor all mode
[ 261.258351@0] usbcore: registered new interface driver mceusblsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0471:0613 Philips (or NXP) Infrared Transceiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hublsmod
LibreELEC-mk808plus:~ # lsmod
Module Size Used by
mceusb 8823 0
rc_core 15742 1 mceusb
hci_uart 41133 1
bluetooth 195102 2 hci_uart
dhd 662196 0
cfg80211 205546 1 dhd
wifi_dummy 745 0
mali 156204 1
fbcon 35121 0
font 7003 1 fbcon
bitblit 3823 1 fbcon
softcursor 928 1 bitblit
[hr]
Addendum: It is exactly the same when using it in the regular USB port.
LibreELEC-mk808plus:~ # lsusb
Bus 001 Device 002: ID 0471:0613 Philips (or NXP) Infrared Transceiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Did your box explode or maybe catch fire ?
Nah that's only Samsung boxes!! 
I think some recoveries are incompatible with sha1_check that is used in 7.0.2.5 to check if there is Android or LE/OE installed. I will revert that change for the next release. Some other minor improvements are coming developed during my work on S905 builds.
I just tried 7.0.2.007 on MXQ pro 4k. Run from SD card all good. installtointernal from ssh all OK. Reboot and black screen. Then i made SD for NAND install. Progress stop at 1/3, device reboot and start over. I am wondering if there are the same sha1_check like the last S805 image?
On the other hand, I still recommend using SD card first and I'm wondering whether I should drop NAND installation ZIP completely.
I'm a fan of that idea.
Working SD Card Install is mandatory for me on any box. Followed by SSH installtointernal has worked 100% on 4 different s905's
I have mxq pro 4k and mx905 4k. On both SD install working and both failed to boot after installtointernal. Personally I prefer LE on nand, but creating sd for nand install is too complicated for s905.
I posted because the similar issue was discussed here. Sorry for the offtopic
No harm, I simply think that keeping discussion in relevant thread makes it easier for others to find.
You might want to elaborate what "without success means" ?
Did your box explode or maybe catch fire ?
I am putting humour into this as i think you must understand we cannot read between lines.
I don't like your chances of the tuner working in LE but a little more info would be good.
Eheheh.. ok details:
1- Using toothpick only shows the recovery menu and never boots from SD.
2- Learning from the Vtimod openelec image I found out for booting from SD without the toothpick I have to put on the boot partion an empty file called unlock_autoscript.
Using this method I got a black screen and never shows the recovery menu, so it never boots and I tested with all the s805 versions for SD here.
3- I can boot from SD the Vtimod openelec image and after I can connect trought SSH so I can see all the files so I asked also like this if it is possible to upgrade/move from Openelec to Libreelec just putting there the right Libreelec files (don't know if all the files I can see are in writable areas?!?!?).
Eheheh.. ok details:
1- Using toothpick only shows the recovery menu and never boots from SD.
2- Learning from the Vtimod openelec image I found out for booting from SD without the toothpick I have to put on the boot partion an empty file called unlock_autoscript.
Using this method I got a black screen and never shows the recovery menu, so it never boots and I tested with all the s805 versions for SD here.
3- I can boot from SD the Vtimod openelec image and after I can connect trought SSH so I can see all the files so I asked also like this if it is possible to upgrade/move from Openelec to Libreelec just putting there the right Libreelec files (don't know if all the files I can see are in writable areas?!?!?).
copy "aml_autoscript" from Vtimod to libreelec card
copy "aml_autoscript" from Vtimod to libreelec card
I did that as I said on number 2 of my post, so on boot stays at a black screen without even showing the recovery menu and nothing else.
@all I would like to publish one more update for S805 before switching to Krypton development.
LibreELEC-S805.HD18Q.arm-7.0-devel-201610120705..>
Updated to above version and lost "Turn On" box via remote.
Went back to .005 and "Turn On" via remote worked.
All Black MXQ (This particular box always worked on the HD18Q Versions as opposed to another All Black MXQ which works with the MXQ Arm versions.)
OK, let's try once more
Again, I installed the latest OE for the MXQ and the MCE remote worked when connected to the OTG port.
After upgrading to LE, the remote stopped working.
Thank you for your help and patience.
