Most IR remotes do work with ir-keytable.
If you want to buy a new one, the amlogic subsection does have a thread about working remotes: remote.conf repository
But some remote only working mode lircd, especially old lcd tv. So i want reference type and merk remote, working in another mode lircd. (Nec-5, nec-6, etc).
I think this link about config remote for build in remote with tvbox, not list remote device only. some one want to reference too for changing old remote
What bluetooth adapter works for this distribution?
My motherboard is an OrangePi plus 2E
Thanks in advance
But some remote only working mode lircd, especially old lcd tv. So i want reference type and merk remote, working in another mode lircd. (Nec-5, nec-6, etc).
I think this link about config remote for build in remote with tvbox, not list remote device only. some one want to reference too for changing old remote
Most of these remotes you can buy on aliexpress without the tv-box. NEC remotes work, MCE remotes should work out of the box. I use a sony remote from a old DVD-player and my previous one was this one: Universal IR Remote Control For Android TV Box H96 MAX/V88/MXQ/TX6/T95X/T95Z Plus/TX3 X96 mini Replacement Remote Controller-in Remote Controls from Consumer Electronics on AliExpress
Search for "tv box remote" on aliexpress.
Most IR remotes do work with ir-keytable.
If you want to buy a new one, the amlogic subsection does have a thread about working remotes: remote.conf repository
I use this remote control on OrangePi PC:
Configuration files are attached. 
My video collection doesn't have too many video codec variations, but these play fine for me:
Ok, then I would say it's already useful. I'll wait that all needed changes hit mesa master and then I'll do some testing.
What bluetooth adapter works for this distribution?
In general all USB bluetooth adapters supported in Linux should work, but I can't give you any specific names.
Most of these remotes you can buy on aliexpress without the tv-box. NEC remotes work, MCE remotes should work out of the box. I use a sony remote from a old DVD-player and my previous one was this one: Universal IR Remote Control For Android TV Box H96 MAX/V88/MXQ/TX6/T95X/T95Z Plus/TX3 X96 mini Replacement Remote Controller-in Remote Controls from Consumer Electronics on AliExpress
Search for "tv box remote" on aliexpress.
Ok thank. I hope already in my country.
Ok thank. I hope already in my country.
MCE remotes you can find probably in the shop just around the corner. Mostly they have a windows logo somewhere printed on them. They are mostly advertised for 'windows media center'.
i finally dusted off my Pine A64 (i had fairly recently been running so i know its working) and loaded up the latest two versions of the nightly for the A64. it boots, expands the file system and reboots as it should...but then fails to start the samba daemon. not really sure what i'm missing or if there's a stable image. any suggestions will be appreciated, thanks!
jernej Kodi of Orange Pi one plus H6,is 19 alpha?I have problem with pvr addons...Dependence error
btmgmt public-addr 00:03:19:9e:8b:00 But be aware that btmgmt is not included in image. I found it in bluez build folder.
That works, but is there a cleaner way to make it work out of the box by now?
I opened a merge request to use mesa on H6 devices: Use mesa for Allwinner H6 devices by dhewg · Pull Request #3988 · LibreELEC/LibreELEC.tv · GitHub
As mentioned earlier: works great for me, but testing is very welcome!
Hi everyone.
Did anyone experienced ir remote responsiveness issues during video playback? I'm using libreelec on Orange Pi 2 mini board, with onboard IR receiver. No problems during Kodi UI navigation, but as soon as I start a video remote becomes almost unresponsive, and I have to press buttons several times to get a reaction. I tried raising nice to -15 for eventlircd and it seems to help a little, but not much.
Regards.
Christian
but then fails to start the samba daemon.
You have to be more specific. Output of pastekodi would help here.
Kodi of Orange Pi one plus H6,is 19 alpha?I have problem with pvr addons...Dependence error
This is all pre-alpha. At this point addons can be broken at any point. And no, there is no stable image yet.
That works, but is there a cleaner way to make it work out of the box by now?
No, I made a PR for that but it has several issues (doesn't work in all cases and should be done with udev instead of services). I guess best solution would be to develop some kernel and U-Boot patches, so BT MAC gets set same way as ETH MAC.
Hello
previous version h3 no one has?You have to be more specific. Output of pastekodi would help here.
This is all pre-alpha. At this point addons can be broken at any point. And no, there is no stable image yet.
No, I made a PR for that but it has several issues (doesn't work in all cases and should be done with udev instead of services). I guess best solution would be to develop some kernel and U-Boot patches, so BT MAC gets set same way as ETH MAC.
And for the old img?Where i can found?Thanks
And for the old img?Where i can found?Thanks
what is old image for you?