Nightly images for A64, H3, H5, H6 and R40 boards

    Quote from jernej

    Here is the relevant PR if you want to build it yourself: Allwinner: Fix USB3 support by jernejsk · Pull Request #3730 · LibreELEC/LibreELEC.tv · GitHub

    Oh, thank you!) But I always have trouble with the patches. I just don't know how to install them))) So I guess I'll wait for your image.)

    Quote from jernej

    As I said, I can look into that if I have a sample which triggers the issue. Torrents are not allowed here and I really don't want to have 60 GiB sample. Video files are usually still playable if you cut them at arbitrary length, so why don't you just copy about 50 MiB of that video file and send me a link over private message?

    Okay! No editor to cut with. I will try to install some and send the file to you

    Quote from jernej

    You don't need video editor (it will probably do some re-encoding, which is highly undesirable in this case), just use dd or something similar. dd command would look like:

    dd if=inputvideo.m2ts of=sample.m2ts bs=1M count=50

    You just never believe me, but I was just reading now that all the editors are transcoding the video after the split and our whole idea just collapses))))

    thx for command!!! it changes the business))

    Quote from jernej

    ilchenko I get a green screen with flickering on H6, but normal video on PC, so it's a good sample. I'll take a look, but don't expect quick solutions. Last H264 issue took me half a year to solve and it turned out to be HW quirk.

    The most important thing is to reproduce the error. And we did it. For solution we are wait as long as need. Thx!

    Quote from jernej

    Are you using AV receiver by any chance? If so, try without it.

    I'm using a old type stereo amplifier connected directly to the TV-out. And I also tested with a HDMI to VGA adapter, but with same result. Had any one test the OP one plus yet? Or I'm the only one have that problem? OP3 image can work on this card, but also no right channel.

    Edited once, last by Oponp (July 31, 2019 at 1:42 AM).

    I did a test with the newest image on my opi-one-plus, and still have the same problem (black screen). I tested multiple cables on my TV and monitor (all are working fine with various pis, odroids etc.), and I finally had a signal on the monitor (but not stable). Funny thing is: my TV has multiple inputs and it switches to the input the opi is connected to, so there must be at least a weak signal.

    My question is: can you make the HDMI-signal stronger? Since the desktop image of Xulong is working fine, I assume they use a stronger HDMI-signal.

    hi jernej can you help me? I dont know why after view minute booting to home screen my device always restart but stact to logo libreelec and accessable via wifi

    Update: it happen after update library. Before update library (disable update) device still alive. But when manual update restart again

    Update: crash with thetvdb addon

    Why its happen?log-2019-08-03-08.56.20.zip

    Edited 5 times, last by hostkit: Unable upload log from my phone, sorry late (August 4, 2019 at 3:06 PM).

    Hi, I'm still having problems with HDMI audio. I'll try to summarize the problem and attach some logs in case they're useful.

    I have a Orange Pi PC and a Samsung TV from 2009. When running at 1080p 60 Hz, the audio only works for a fraction of a second and then stops working for some seconds repeatedly. When changing the refresh rate to 23.98 Hz it seems that the problem is gone in the UI sounds, but there are still some audio cuts for 2 or 3 seconds when playing videos, but less frequently than at 60 Hz. The problem still persists at 720p 60 Hz and 50 Hz. When using a much lower resolution the problem is gone.

    I tried 2 different HDMI cables and other HDMI inputs in the TV to no avail. It doesn't seem to be a problem with the TV, because it works fine with the old OpenELEC builds with legacy kernel. Also, it works fine with two other monitors at 1080p 60 Hz.

    Here are the logs:

    dmesg

    External Content pastebin.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    edid-decode /sys/class/drm/card0-HDMI-A-1/edid

    External Content pastebin.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    dmesg.txt

    edid-decode.txt

    Hi!

    Can I use OpenELEC build for OPI One Plus with HW decoding only through ssh, without display connected? I need to decode H.264 stream from camera using ffmpeg and save image to sd card every 1 second.

    I tried the latest build (20190805), but the board does not start.

    Edited once, last by coconut (August 5, 2019 at 11:03 PM).