SMB Problem

Hi

I have libreelec 6.95.2 7.0 installed using a Pi3

Network is wired
There are several other Windows/SMB devices in my local network
But If I try to browse for a different SMB device in the file manager then nothing else than libreelec is shown

there are no network problems on my other devices - SMB browsing is working there
WINS is installed on my Home Server and service is up

I tried with manual config and wireless connection also - no luck.

Adding a SMB device manually is working.

Do you have any hints or solutions for me ?

Shure

File Manager - Add Source - Browse - Windows network(SMB) - WORKGROUP - Now I should see 9 devices of my local network

But I only can see the Pi3 named libreelec and one of my Windows Home Servers ( the one with WINS running )

all other devices are not shown

if I do the same on my firetv with SPMC all 9 devices are shown
if I take my notebook and browse in network all 9 devices are shown
if I do the same on my Home Server all devices are shown

only Pi3 has this problem - but I don´t know why..

No

The Name of my Workgroup is WORKGROUP

No other workgroup is present

If I take a look from a windows device the Pi3 named "libreelec" is shown in WORKGROUP too..

hmm I think I should make a fresh install again..

btw. same device different SD Card with OSMC : no problem in filemanager / SMB

( I write this just to make clear that the problem is part of the installation on this Pi3 )