[S812] MIII Plus 2Gb\16Gb eMMC

LibreELEC-S812.MXIII_Plus.arm-7.0.2.6_20161115.img.gz works great via SD card but I will try Krypton and the image from the catalog LAN1000 tomorrow. I saw some comments you made on Freaktab forum about a "glitch" in the file? Can you better explain what if anything needs to be modified?

Quote from balbes150

fw_printenv

LibreELEC (community) Version: 8.0.0
LibreELEC:~ # fw_printenv
bootargs=console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw
bootcmd=run distro_bootcmd
bootdelay=2
baudrate=115200
arch=arm
cpu=armv8
board=hikey
board_name=hikey
vendor=hisilicon
soc=hi6220
kernel_name=Image
kernel_addr_r=0x00080000
fdt_name=hi6220-hikey.dtb
fdt_addr_r=0x02000000
fdt_high=0xffffffffffffffff
initrd_high=0xffffffffffffffff
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
boot_net_usb_start=usb start
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=usb0 mmc1 dhcp
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_usb0=setenv devnum 0; run usb_boot
bootcmd_mmc1=setenv devnum 1; run mmc_boot
bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
bootfromrecovery=1
bootfromnand=1

LibreELEC:~ # udevadm info /sys/bus/sdio/devices/sdio\:0001\:1/
P: /devices/platform/aml_sdio.0/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DEVPATH=/devices/platform/aml_sdio.0/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DRIVER=bcmsdh_sdmmc
E: MODALIAS=sdio:c00v02D0d4335
E: SDIO_CLASS=00
E: SDIO_ID=02D0:4335
E: SUBSYSTEM=sdio

Hi balbes150,

Update from Post # 36:

• Manual update from 7.0.2.5 to LibreELEC-S812.MXIII_Plus.arm-7.0.2.6.tar - works. Everything is fine except Bluetooth broken (used to work in 7.0.2.5). Tried all setting to turn on and off but could not work. Still H265 video is choppy. Lots of buffering. Still no power off.
• In new USB, I tried your Krypton 17 build: Yandex.Disk - Everything works including Bluetooth. Off-course no power off & H265 video still choppy / buffering. Overall happy with build.

keep it up your good work!

Thanks again,

MakaaiD

Quote from balbes150

[hr]

Judging by the output, the script is not executed. Describe in detail how You tried to activate the multi-boot. Have you tried to replace the files on the test ? Have you tried to change the name of the script with the "aml_autoscript" to "boot.scr" ?

i have try all
i do someting wrong i burn image LibreELEC-S812.LAN1000 to sdcard after that i replace the aml autoscript and aml autoscript zip with your 2 minix files i do revovery and relace i get recovery menu and can choose only the aml autoscrip zip if i choose aml auto script i get message - E: footer is wrong
- E: signature verification failed

if i use your LibreELEC-S812.LAN1000 zip package and install on sdcard package open and install on internal memory from the box if i restart with or without sdcard libreelec running only from internal with no wifi signal only lan

so i don,t understand can you upload me one update zip package for sdcard with all in so i must only go to recovery and install

Installed LibreELEC-S812.LAN1000.arm-8.0.0_20161206.img.gz on SD card and booted up on MXIII plus. Was able to install a couple of add-ons including PVR backend however Kodi runs very slow. Best way to describe it would be to imagine running Kodi on underpowered hardware. Wired LAN connection was able to benchmark at 100 Mbps down. I"ll go back to 7.0.2.6. Thanks for making these builds available.

Quote from balbes150

If You are difficult, try to run from external media version of the catalog LAN10000
[hr]

After examining the firmware files for Your device, I will try to assemble a new version of the scripts.

it will be nice to get it to work thanks

Does it work on m8s Clone Box
Bad anyone tested it

Would this work on a Xtreamer Wonder Pro (specs here: Xtreamer Wonder - Specs)?

I've Tronsmart MXIII Plus 108L1.
I've create SDcard with LibreELEC-S812.MXIII_Plus.arm-7.0.2.6_20161115.img.xz. Boot to SD card is ok.
I've view the LibreELEC logo but left up compare this text error: Error in prepare-sysroot: mount_common: could not mout /dev/system
Starting debuging...
And now?

Thanks in advance

Quote from MagicDude4Eva

Would this work on a Xtreamer Wonder Pro (specs here: Xtreamer Wonder - Specs)?

yes work.

Quote from vgf

yes work.

Thanks - I will try this over the long weekend coming up here. Just have not found the time yet to test it.

Quote from balbes150

You have completed the activation of the recorded multi-boot with the new image ?

When insert the sdcard, the box starts with LibreELEC, if it's not insert the sd starts Android.