Since I upgraded to LE9, the image size calibration is not saved anymore. When I adjust the image size via this screen the image is adjusted, but after a reboot the adjustments are gone.
Is this a known issue?
Image calibration not saved
-
reynard80 -
March 12, 2019 at 10:41 AM -
Thread is Unresolved
-
- Official Post
Yep. Should be fixed in the next Kodi version.
Why would you need calibration anyway?
What is your display, and old CRT monitor/TV ?
Every recent TV has its own settings for a 1:1 pixel display, and in that way, disabling overscan.
Using calibration should be the very last resort for solving these problems.
-
Why would you need calibration anyway?
What is your display, and old CRT monitor/TV ?
Every recent TV has its own settings for a 1:1 pixel display, and in that way, disabling overscan.
Just an FYI - there were quite a few TVs from the plasma era (as late as 2007-2008) which did not support any overscan control or override. I had a Panasonic plasma from 2007 with exactly this issue and I always had to use the calibrate feature until just two years ago when I changed up to a 4k OLED. The good plasmas were so good, it wouldn't surprise me if there's still a moderate number in use.
-
- Official Post
2007-2008 is another lifetime older than say my 2012 TV. Go back far enough, and sure, the TV won't have 1:1 pixel display.
-
True. My point was, it's not just CRTs, but older TVs with HDMI and so on. But you're right - it's a very long time in terms of modern product life cycles.
-
Using LibreELEC 9.2.1 on a Raspberry Pi 3, on a CRT TV. I know my setup is not often found in LibreELEC world, but still, this conversation happened more than a year ago and the issue is still not solved. I was wondering if there is a workaround. I tried inputting my values in config.txt but they are ignored. Any other ideas? Thanks!
-
- Official Post
Any other ideas?
Video calibration settings changes are lost after Kodi restart · Issue #15165 · xbmc/xbmc · GitHub
sounds like issue is still not fixed
feel free to comment there, its no usecase for me
-
I have the same issue on CRT. I will be very happy if I can save the screen calibration. I know that is not an urgent problem and only few users will appreciate. I will try to understand code tomorrow if I can find that part and if it use a file to be persistent. Any advice will be appreciated
