Driver for Terratec S7 rev.4?

daniel50123 · June 23, 2018 at 8:00 PM

Hi!

I am new here, i have a RaspberryPi 2 with Tvheadend running and buyed a TerraTec S7 rev.4 (newest)

now i wanted to install the Driver but i seems that the linux driver page is down (linux.terratec.com)

On linuxtv its not listed at all https://www.linuxtv.org/wiki/index.php/terratec_s7 (only 1,2 and 3)

What i found out that it seems the hardware of the rev.4 is totally different as on the older revisions?

I think its from dvbsky, because terratec is only a reseller.

Is it even supported by linux?

dmesg | grep dvb does not find anything

but dmesg | grep TERRATEC shows me:

Code

[    2.153267] usb 1-1.4: Product: TERRATEC S2 CI USB
[    2.153277] usb 1-1.4: Manufacturer: TERRATEC

and full output of dmesg:

Code

[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Linux version 4.14.49-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1120 SMP Wed Jun 13 17:08:38 BST 2018
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3ac00000
[    0.000000] On node 0 totalpages: 242688
[    0.000000] free_area_init_node: node 0, pgdat 80c84fc0, node_mem_map ba3a1000
[    0.000000]   Normal zone: 2133 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 242688 pages, LIFO batch:31
[    0.000000] percpu: Embedded 17 pages/cpu @ba34b000 s38720 r8192 d22720 u69632
[    0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 940244K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22316K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)                   vmalloc : 0xbb800000 - 0xff800000   (1088 MB)                   lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)                   modules : 0x7f000000 - 0x80000000   (  16 MB)                     .text : 0x80008000 - 0x80800000   (8160 kB)                     .init : 0x80b00000 - 0x80c00000   (1024 kB)                     .data : 0x80c00000 - 0x80c8feb4   ( 576 kB)                      .bss : 0x80c96f40 - 0x80d478b4   ( 707 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 25253 entries in 75 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000023] Switching to timer-based delay loop, resolution 52ns
[    0.000334] Console: colour dummy device 80x30
[    0.000356] console [tty1] enabled
[    0.000387] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000406] pid_max: default: 32768 minimum: 301
[    0.000807] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000827] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002020] Disabling memory control group subsystem
[    0.002153] CPU: Testing write buffer coherency: ok
[    0.002739] CPU0: update cpu_capacity 1024
[    0.002752] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.003336] Setting up static identity map for 0x100000 - 0x10003c
[    0.003517] Hierarchical SRCU implementation.
[    0.004471] smp: Bringing up secondary CPUs ...
[    0.005535] CPU1: update cpu_capacity 1024
[    0.005547] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.006721] CPU2: update cpu_capacity 1024
[    0.006732] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.007864] CPU3: update cpu_capacity 1024
[    0.007874] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.008021] smp: Brought up 1 node, 4 CPUs
[    0.008036] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.008043] CPU: All CPU(s) started in HYP mode.
[    0.008048] CPU: Virtualization extensions available.
[    0.009234] devtmpfs: initialized
[    0.021351] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[    0.022211] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.022537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.022563] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.023373] pinctrl core: initialized pinctrl subsystem
[    0.024476] NET: Registered protocol family 16
[    0.027699] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.033887] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.033900] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.034156] Serial: AMBA PL011 UART driver
[    0.036378] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.077789] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[    0.079678] SCSI subsystem initialized
[    0.079998] usbcore: registered new interface driver usbfs
[    0.080071] usbcore: registered new interface driver hub
[    0.080280] usbcore: registered new device driver usb
[    0.090412] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-06-07 15:31
[    0.092185] clocksource: Switched to clocksource arch_sys_counter
[    0.179322] VFS: Disk quotas dquot_6.6.0
[    0.179446] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.179699] FS-Cache: Loaded
[    0.180008] CacheFiles: Loaded
[    0.192898] NET: Registered protocol family 2
[    0.193897] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.194029] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.194217] TCP: Hash tables configured (established 8192 bind 8192)
[    0.194401] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.194463] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.194796] NET: Registered protocol family 1
[    0.195482] RPC: Registered named UNIX socket transport module.
[    0.195491] RPC: Registered udp transport module.
[    0.195496] RPC: Registered tcp transport module.
[    0.195503] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.197374] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.201233] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.211749] FS-Cache: Netfs 'nfs' registered for caching
[    0.212706] NFS: Registering the id_resolver key type
[    0.212758] Key type id_resolver registered
[    0.212765] Key type id_legacy registered
[    0.212784] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.215582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.215781] io scheduler noop registered
[    0.215791] io scheduler deadline registered (default)
[    0.216171] io scheduler cfq registered
[    0.216180] io scheduler mq-deadline registered
[    0.216187] io scheduler kyber registered
[    0.218425] BCM2708FB: allocated DMA memory fad00000
[    0.218469] BCM2708FB: allocated DMA channel 0 @ bb813000
[    0.229972] Console: switching to colour frame buffer device 90x30
[    0.238541] bcm2835-rng 3f104000.rng: hwrng registered
[    0.238699] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.239349] vc-sm: Videocore shared memory driver
[    0.239759] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.254232] brd: module loaded
[    0.266086] loop: module loaded
[    0.266103] Loading iSCSI transport class v2.0-870.
[    0.266998] libphy: Fixed MDIO Bus: probed
[    0.267130] usbcore: registered new interface driver lan78xx
[    0.267211] usbcore: registered new interface driver smsc95xx
[    0.267233] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.495503] Core Release: 2.80a
[    0.495516] Setting default values for core params
[    0.495559] Finished setting default values for core params
[    0.695888] Using Buffer DMA mode
[    0.695898] Periodic Transfer Interrupt Enhancement - disabled
[    0.695904] Multiprocessor Interrupt Enhancement - disabled
[    0.695913] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.695928] Dedicated Tx FIFOs mode
[    0.696447] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[    0.696480] FIQ FSM acceleration enabled for :               Non-periodic Split Transactions               Periodic Split Transactions               High-Speed Isochronous Endpoints               Interrupt/Control Split Transaction hack enabled
[    0.696489] dwc_otg: Microframe scheduler enabled
[    0.696561] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e7cb0
[    0.696574] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e8018 length 36
[    0.696589] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000
[    0.696664] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.696709] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.696780] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.696831] Init: Port Power? op_state=1
[    0.696837] Init: Power Port (0)
[    0.697144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.697158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.697169] usb usb1: Product: DWC OTG Controller
[    0.697179] usb usb1: Manufacturer: Linux 4.14.49-v7+ dwc_otg_hcd
[    0.697189] usb usb1: SerialNumber: 3f980000.usb
[    0.698023] hub 1-0:1.0: USB hub found
[    0.698084] hub 1-0:1.0: 1 port detected
[    0.698810] dwc_otg: FIQ enabled
[    0.698818] dwc_otg: NAK holdoff enabled
[    0.698824] dwc_otg: FIQ split-transaction FSM enabled
[    0.698837] Module dwc_common_port init
[    0.699186] usbcore: registered new interface driver usb-storage
[    0.699459] mousedev: PS/2 mouse device common for all mice
[    0.699545] IR NEC protocol handler initialized
[    0.699551] IR RC5(x/sz) protocol handler initialized
[    0.699557] IR RC6 protocol handler initialized
[    0.699563] IR JVC protocol handler initialized
[    0.699569] IR Sony protocol handler initialized
[    0.699575] IR SANYO protocol handler initialized
[    0.699581] IR Sharp protocol handler initialized
[    0.699587] IR MCE Keyboard/mouse protocol handler initialized
[    0.699593] IR XMP protocol handler initialized
[    0.700526] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.700834] bcm2835-cpufreq: min=600000 max=900000
[    0.701286] sdhci: Secure Digital Host Controller Interface driver
[    0.701293] sdhci: Copyright(c) Pierre Ossman
[    0.701744] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.701885] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.702689] ledtrig-cpu: registered to indicate activity on CPUs
[    0.702834] hidraw: raw HID events driver (C) Jiri Kosina
[    0.702996] usbcore: registered new interface driver usbhid
[    0.703002] usbhid: USB HID core driver
[    0.703777] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[    0.705497] [vc_sm_connected_init]: start
[    0.714461] [vc_sm_connected_init]: end - returning 0
[    0.715186] Initializing XFRM netlink socket
[    0.715220] NET: Registered protocol family 17
[    0.715348] Key type dns_resolver registered
[    0.715831] Registering SWP/SWPB emulation handler
[    0.716686] registered taskstats version 1
[    0.724145] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.724250] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.724319] console [ttyAMA0] enabled
[    0.726775] sdhost: log_buf @ bad13000 (fad13000)
[    0.802228] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.803556] of_cfs_init
[    0.803677] of_cfs_init: OK
[    0.804504] Waiting for root device /dev/mmcblk0p2...
[    0.912335] Indeed it is in host mode hprt0 = 00021501
[    0.980798] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.984247] mmc0: new high speed SDHC card at address aaaa
[    0.985026] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[    0.986996]  mmcblk0: p1 p2
[    1.003713] random: fast init done
[    1.014305] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.014375] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.015373] devtmpfs: mounted
[    1.019159] Freeing unused kernel memory: 1024K
[    1.122258] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.122436] Indeed it is in host mode hprt0 = 00001101
[    1.362590] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.362620] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.363570] hub 1-1:1.0: USB hub found
[    1.363678] hub 1-1:1.0: 5 ports detected
[    1.577623] systemd[1]: System time before build time, advancing clock.
[    1.682260] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.738821] NET: Registered protocol family 10
[    1.740535] Segment Routing with IPv6
[    1.758909] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.787460] random: systemd: uninitialized urandom read (16 bytes read)
[    1.802613] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.803454] systemd[1]: Detected architecture arm.
[    1.812687] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.812703] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.815627] smsc95xx v1.0.6
[    1.819225] systemd[1]: Set hostname to <raspberrypi>.
[    1.875139] random: systemd: uninitialized urandom read (16 bytes read)
[    1.918584] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:63:08:d7
[    1.924132] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[    1.942119] uart-pl011 3f201000.serial: no DMA platform data
[    2.012250] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[    2.153238] usb 1-1.4: New USB device found, idVendor=0ccd, idProduct=10a6
[    2.153256] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.153267] usb 1-1.4: Product: TERRATEC S2 CI USB
[    2.153277] usb 1-1.4: Manufacturer: TERRATEC
[    2.153288] usb 1-1.4: SerialNumber: 20130903
[    2.668230] systemd[1]: hciuart.service: Cannot add dependency job, ignoring: Unit hciuart.service is masked.
[    2.668610] systemd[1]: raspberrypi-net-mods.service: Cannot add dependency job, ignoring: Unit raspberrypi-net-mods.service is masked.
[    2.668788] systemd[1]: dhcpcd.service: Cannot add dependency job, ignoring: Unit dhcpcd.service is masked.
[    2.678328] systemd[1]: Listening on udev Control Socket.
[    2.679189] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.679537] systemd[1]: Listening on RPCbind Server Activation Socket.
[    2.680742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.888168] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    2.896598] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    2.902356] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
[    3.035674] usb 1-1.5: New USB device found, idVendor=174c, idProduct=55aa
[    3.035764] usb 1-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    3.035776] usb 1-1.5: Product: USB 3.0 Device
[    3.035786] usb 1-1.5: Manufacturer: Intenso
[    3.035797] usb 1-1.5: SerialNumber: 30700000000000003DB7
[    3.037002] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[    3.063091] usb-storage 1-1.5:1.0: Quirks match for vid 174c pid 55aa: 400000
[    3.073276] scsi host0: usb-storage 1-1.5:1.0
[    3.191103] systemd-journald[95]: Received request to flush runtime journal from PID 1
[    3.822442] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    3.833423] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[    4.153933] scsi 0:0:0:0: Direct-Access     Intenso  USB 3.0 Device   0    PQ: 0 ANSI: 6
[    4.340960] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.566166] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    4.566415] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.449984] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.451587] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[    8.399450] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    8.399469] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    8.400094] sd 0:0:0:0: [sda] Write Protect is off
[    8.400109] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    8.400716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.425842]  sda: sda1
[    8.432818] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.021901] fuse init (API version 7.26)
[   10.363627] random: crng init done
[   10.363651] random: 7 urandom warning(s) missed due to ratelimiting
[   12.206000] Bluetooth: Core ver 2.22
[   12.206124] NET: Registered protocol family 31
[   12.206134] Bluetooth: HCI device and connection manager initialized
[   12.206162] Bluetooth: HCI socket layer initialized
[   12.206178] Bluetooth: L2CAP socket layer initialized
[   12.206227] Bluetooth: SCO socket layer initialized
[   12.595532] Adding 102396k swap on /var/swap.  Priority:-2 extents:2 across:2134012k SSFS

Display More

Seems that is not recognized right, what should i do?

Tested on WIN7, worked perfectly...

I hope anyone can help me, because otherwise I will return it...

Thanks for your help!

regards,

Daniel

**chewitt** · June 24, 2018 at 4:56 AM Official Post

I read the same thread that you read that hints about DVBSky .. the driver is probably missing USB device IDs to match against the hardware.

ping CvH Add "custom" satellite in SichboPVR? - Ricks Satellite Wildfeed and Backhaul Forum

**CvH** · June 24, 2018 at 10:24 AM Official Post

Quote from daniel50123

TerraTec S7 rev.4 (newest)

its likely (if you have an opportunity to open the case and take an photo ?) an (not official called) rev.5 including Montage M88DS3103b

currently there are no drivers for that b revision of that chip

basically every other USB-S2 device has the same problem at his 2018+ versions

Does this dvb s2 tuner work?

daniel50123 · June 24, 2018 at 10:55 AM

ok thanks, then i will send it back!

I saw one that seems to be supported, as i could take it from the reviews?

but they all buyed the non-CI version (but the V2) of it but i need one with CI

so does this Works?

It is this Device: https://www.amazon.de/dvbsky-s960c-dvb-s2-common-interface/dp/b07cj4bjz5/ref=cm_cr_arp_d_pdt_img_top?ie=utf8

**CvH** · June 24, 2018 at 11:54 AM Official Post

Idk why you need CI (an usb CI reader might be enough) but basically every usb device has the same problem

It looks like starting 2018 the old M88DS3103 wasn't available anymore and just the M88DS3103b was manufactured -> every device with M88DS3103 might be problematic due that

https://www.amazon.de/dp/b01m00x69z/ + an USB CI might do the trick (HD+ I guess ?) depending if the S960 is the old or the new model - nobody knows till you tried it ;D

daniel50123 · June 24, 2018 at 12:17 PM

Ok i saw a review form the 24. April 2018 and he says he has it running without problems on raspian/tvheadend (thats exactly what i want)

with the Rev.2, so i think it should work so the only question is how to get CI working? (need it for the ORF programs in Austria)

What CI reader does work with raspbian/tvheadend?

thanks

**5schatten** · June 24, 2018 at 1:06 PM

Well I used this one in the past Smartmouse/Easymouse 2 USB Premium Programmer ab â¬Â 19,90 (2018) | heise online Preisvergleich / Deutschland to let oscam read a HD02 card. Guess you need something similar to descramble the output?

**CvH** · June 24, 2018 at 1:10 PM Official Post

You need an oscam setup regardless if build in or extern ci.

Smartmouse Easymouse 2 Premium for 20€ or a Smargo for 1-15€(eBay). Most tutorials are Easymouse based so likely easiest way.

daniel50123 · June 24, 2018 at 1:16 PM

Ok thanks,

so this should work together, right?

https://www.amazon.de/dp/b01m00x69z/ + https://www.amazon.de/smartmouse-easymouse-usb-premium-programmer/dp/b004hrui5o/ref=cm_cr_arp_d_pdt_img_top?ie=utf8

**CvH** · June 24, 2018 at 5:46 PM Official Post

If the dvbsky has not the B version it should work (no idea actually tech info not available)

daniel50123 · June 24, 2018 at 9:10 PM

Ok thanks, I'll try it and send the TerraTec back...

I hope it works...

I will report if it's working.

Thanks for your help!

**CvH** · September 24, 2018 at 4:44 PM Official Post

testimage that may work

Geniatech Mygica HDStar DVB-S2 USB HD not working

Similar Threads

Does this dvb s2 tuner work?