[S812] Build for Acemax M8S M8S+

kerber's latest M8SPlus solves the power button issue.

Index of /image/devel

It still has a live tv video playback buffer issue for me...so I have to stick with Drieshel's build. Not sure what my issue is...but maybe I can build a hybrid between the two builds!

Quote from dankec

Not true! Still the same (at least .tar file)

Strange - that .tar file makes my power button work. Did kerber's 6.95 OE build work for your remote? If so, maybe grab the remote.conf file from there...or from your android image.

I almost have an M8S+ version of drieschel's build ready -- but thanks to Windows update last night, it trashed the compile process. I'll start it again tonight and see what happens.

Good evening,
I have T8-AML-V3-S (Amlogic S812). Is this version compatible vith this device?
If yes were can I find the firmware and the installation manual?

Thanks for the support
V.

Quote from vascoa_12

Good evening,
I have T8-AML-V3-S (Amlogic S812). Is this version compatible vith this device?
If yes were can I find the firmware and the installation manual?

Thanks for the support
V.

Display More

LibreELEC

Quote from edit4ever

LibreELEC

So in your opinion the S802 version for T8 sould work (for my T8-V3-S with S812)?
I'll try this: LibreELEC-S802.T8.arm-7.0.2-2-devel.zip

dankec - Unfortunately my build did not work. I think I missed some patches while setting up the S812 project.

As for the remote issue...obviously drieschel's M8 version is not meant for M8S+ so we can't expect the remote to completely work correctly. For me, the remote will turn off the system - but I believe it is going into a hibernate/sleep mode not the shutdown sequence. The remote will not power the system back on. Using the shut down menu in kodi causes the system to reboot instead of shut down.

In kerber's M8S+ version, the remote will shutdown the system - but againI believe it is going into a hibernate/sleep mode not the shutdown sequence. The remote will not power back on from that state. However, if I use the shutdown menu in kodi, the remote will power back on from that state.

On the live TV issue -- video plays fine with drieschel's M8 version but buffers and breaks up on kerber's M8S+ version. Kerber's M8S+ version is built from drieschel's git - so it has something to do with the linux or kodi patches or the device tree. If I have time I will try to investigate further...but hopefully drieschel is working on an S812 version! Also, with the improvements in kodi 17 for pvr handling...I'm hoping that kerber makes an LE8 build for M8S+.

Quote from dankec

Till then... we have to wait and I will unfortunately go back to 6.95 which worked flawlessly with power on/off

I noticed that in OE 6 kerber was using the meson8m2_n200_2G.dtd for M8S+

In LE 7 he is using meson8m2_n200C_2G.dtd

Maybe this is causing the issue with the power button?

Quote from drakulaboy

this is working on my MXIII-G box, i put the remote.conf file in /storage/.config/

if the power doesn't work for you try instean on line 0x51 31 replace it with 0x51 116

Code

#*********************************************************************************************************
#this file is configuration for each factory remote device
#       work_mode         0 oftware mode  1 :hardware mode
#       repeat_enable     0 :disable repeat 1 :enable repeat
#
#       factory_code      each device has it's unique factory code.
#                         pattern:custom_code(16bit)+index_code(16bit)
#                         examble: 0xff000001 = 0xff00(custom cod)  0001
(index)
#
#       release_delay     unit:ms.release will report from kernel to
user layer after this period of time
#                         from press or repeat triggered.
#
#       debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#       bit_count         how many bits in each frame
#       tw_leader_act     time window for leader active
#       tw_bit0           time window for bit0 time.
#       tw_bit1           time window for bit1 time
#       tw_repeat_leader  time window for repeat leader
# REG
#       reg_base_gen      set value for PREG_IR_DEC_BASE_GEN
#       reg_control       set value for PREG_IR_DEC_CONTROL
#       reg_leader_act    set value for PREG_IR_DEC_LEADER_ACTIVE
#       reg_leader_idle   set value for PREG_IR_DEC_LEADER_IDLE
#       reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#       reg_bit0_time     set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_code    = 0x7f800001
work_mode               = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay   =       121
debug_enable    = 1


fn_key_scancode    = 0x15
left_key_scancode  = 0x1c
right_key_scancode = 0x48
up_key_scancode    = 0x44
down_key_scancode  = 0x1d
ok_key_scancode    = 0x5c
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1b


mouse_begin
                0 0x1c
                1 0x48
                2 0x44
                3 0x1d
mouse_end


key_begin
                0x4d 113
    0x56 114
    0x4e 115
    0x25 105
    0x26 103
    0x27 106
    0x28 108
    0x0d 28
    0x1b 1
    0x53 102
    0x51 31
    0x49 139
    0x52 264
    0x31 2
    0x32 3
    0x33 4
    0x34 5
    0x35 6
    0x36 7
    0x37 8
    0x38 9
    0x39 10
    0x30 11
    0x58 265
    0x44 14
    0xbd 122
    0xbb 123
    0x09 269
    0x11 266
    0x54 267
    0x4f 268










key_end
repeat_key_begin
                0x4d 113
    0x56 114
    0x4e 115
    0x25 105
    0x26 103
    0x27 106
    0x28 108
    0x0d 28
    0x1b 15
    0x53 102
    0x51 704
    0x49 139
    0x52 264
    0x31 2
    0x32 3
    0x33 4
    0x34 5
    0x35 6
    0x36 7
    0x37 8
    0x38 9
    0x39 10
    0x30 11
    0x58 265
    0x44 111
    0xbd 122
    0xbb 123
    0x09 269
    0x11 266
    0x54 267
    0x4f 268
repeat_key_end

Display More

hi thanks for this remote.conf, i need it i am im same postion like you, have maybie the same box, i have mx3g but is a clone just firmware from m8splus gone for openelec, now i use this remote.conf
to storage/config
works great witout to power on!!!!
sorry for my bad english, i am french
thanks

Quote from drakulaboy

i solved my power button on/off problem on LibreElec remote.conf, when i push the power button it's showing that little menu with Power off, restart, and when i shutting down and puh again it's starting.
this is working on my MXIII-G box, i put the remote.conf file in /storage/.config/

if the power doesn't work for you try instean on line 0x51 31 replace it with 0x51 116

please any help i have the same problem, i try to change to 0x51 116 effekt is no give menu befor shutdown
how can i wake up????????????
any help

Quote from dankec

worked perfect! But I think it isn't remote.conf guilty but something with LE image. I will try .zip update and hardly wait for your version!

EDIT: power on is working when box is cold! Crazy!

can you give me please link to download Kerber's 6.95 , you say with this version work the power on buton from remote??

or  edit4ever you have another version Drieschel's link, that works with MX3g/MS8+ clone

thanks in advance .

Quote from dankec

Here's the 6.95.1 link: MEGA

thanks i try to flash it, it sure with this image work the remote contol fully???

Quote from dankec

Yes in my case...

That version had a fully working remote for me as well. Just the issue with live tv playback from a usb tuner. The 7.0.2 version MEGA can power on if I use the shutdown menu to turn off the system...but not if I power off from the remote's power button.