FYI: i have a MXIII-G box with board MXIII-C V1.1 n200c downloaded LibreELEC-Amlogic.arm-M8SPlus-7.0.2-update.zip from here MEGA and updated from USB , it's working good, but how can i do that remote to work again on LibreElec? Thank you!
You will need your remote.conf file from android. Once you have that, drop it into config folder. Reboot and remote should now work in LE.
So, I think it's not only due to remote config.
I have the same issue - I believe the power on code is hardcoded in the bootloader. I believe it will take a specific version of dreischel's firmware for our M8S+ power on remote button to work. I believe it will need this file:
u-boot/irremote2arc.c at master · surkovalex/u-boot · GitHub
I've been planning to try to compile a version for our M8S+ but I haven't had time to set it up. Surkovalex (kerber) did compile one:
LibreELEC-Amlogic.arm-M8SPlus-7.0.2.tar
...but something is still not right in his version as my live tv constantly buffers, whereas drieschel's version is smooth!
nice, thank you, i got my remote.conf from android, placed it, it's working but:
Power button is only waking up the box
Home not working
Menu working
Volume working
Mute working
Arrows working
Numbers working
**
EDIT: i'm getting it, i just edited the Ok number and it's working, will keep diggin
EDIT2: Back is working bby)))
Thank you all!
I saw the same issue on both of kerber's versions. This issue is when using an ATSC usb tuner in the USA.
I have to reconfigure my build environment, so it may be a few days before I can try to compile an M8S+ from drieschel's LE version. I believe that he (and maybe others) were working on a universal s812 build, but I don't know the status of that. I think they are more focused on building and testing LE 8...can't fault them for that! 
If there is anyone else who can test kerber's version and ATSC tuner I would love ot know if they have the same issue. However, I think most users are not in the USA.
If I get something compiled, I will definitely post it and share the git.
i solved my power button on/off problem on LibreElec 
remote.conf, when i push the power button it's showing that little menu with Power off, restart, and when i shutting down and puh again it's starting.
i solved my power button on/off problem on LibreElec
Can you post this remote.conf and where did you put it exactly (in Libreelec)?
this is working on my MXIII-G box, i put the remote.conf file in /storage/.config/
if the power doesn't work for you try instean on line 0x51 31 replace it with 0x51 116
#*********************************************************************************************************
#this file is configuration for each factory remote device
# work_mode 0 oftware mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001
(index)
#
# release_delay unit:ms.release will report from kernel to
user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_code = 0x7f800001
work_mode = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay = 121
debug_enable = 1
fn_key_scancode = 0x15
left_key_scancode = 0x1c
right_key_scancode = 0x48
up_key_scancode = 0x44
down_key_scancode = 0x1d
ok_key_scancode = 0x5c
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1b
mouse_begin
0 0x1c
1 0x48
2 0x44
3 0x1d
mouse_end
key_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 28
0x1b 1
0x53 102
0x51 31
0x49 139
0x52 264
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 265
0x44 14
0xbd 122
0xbb 123
0x09 269
0x11 266
0x54 267
0x4f 268
key_end
repeat_key_begin
0x4d 113
0x56 114
0x4e 115
0x25 105
0x26 103
0x27 106
0x28 108
0x0d 28
0x1b 15
0x53 102
0x51 704
0x49 139
0x52 264
0x31 2
0x32 3
0x33 4
0x34 5
0x35 6
0x36 7
0x37 8
0x38 9
0x39 10
0x30 11
0x58 265
0x44 111
0xbd 122
0xbb 123
0x09 269
0x11 266
0x54 267
0x4f 268
repeat_key_end
M8S+ which differs from MXIII-G
wrong, they have the same cpu 
wrong, they have the same cpu
Nothing to add.
i wish i could for example how to change the name of device here 
What about power on/off problem?
This fw from /devel folder works?
On both the /8xx version and the /devel versions have the same result for me...which is why I went back to Drieschel's M8 version.
Power button works as expected.
Video playback of live tv stream (usb ATSC tuner) breaks up.
Thie video playback works great on Drieschel's version. And I can power off with remote - it turns off, but doesn't bring up the shutdown menu. But I can't power back on with remote - have to unplug. Also on a restart, it usually hangs on the splash screen and I have to unplug to reboot.
For me, a working live tv playback is more important than a clean power on/off/restart as I usually leave the box on to record tv programs.
wrong, they have the same cpu
Just FYI, drakulaboy, I tried with your remote.conf, remote is not working at all, of course.
But I found another remote.conf for M8S. This one's working, also shows a small menu when choosing power key, but still cannot power on after power off.
It means it's not remote.conf related, the problem is somewhere else...
Just FYI, drakulaboy, I tried with your remote.conf, remote is not working at all, of course.
But I found another remote.conf for M8S. This one's working, also shows a small menu when choosing power key, but still cannot power on after power off.It means it's not remote.conf related, the problem is somewhere else...
I had the same problem if I remember. I fixed it by powering the box through one of the usb-ports. Altough I didn't try to fix it that way, but since I do it this way I don't have the problem anymore. I just started doiing that because I use a powered usb-hdd.
BTW, I had to switch the hardware acceleration to 'always' instead of ' 720p and up', cause I had a lot of stuttering while playing mkv's made with makemkv.
