LE 8.2.5 with UHD 630 / Coffee Lake / Gemini Lake support and luks

  • some updates ... what was done:

    No more builds with 4.16, because it is now EOL.

    Edited 1st post: removed 5.42, removing lvm2/mdadm announced, 6.42 now with kernel 4.17, removed Xin1 versions


    8.2.5-6.42.3-4.17.2 in Generic here HiDrive

    - just build new images from testing version 8.2.5-6.42.3-201806171607-4.17.2 (for 14 days running fine on my coffee lake)

    - full release post #123


    8.2.5-6.42.3-4.17.3 in Generic here HiDrive

    - just kernel bump

  • some updates ... what was done:

    8.2.5-3.42.3-4.14.52 in Generic/RPi2 here HiDrive

    - version bump to .3 for removing lvm2, dm-raid (if somebody really wants it: respond in this thread)

    - clean build

    - kernel update 4.14.52

  • some updates ... what was done:

    8.2.5-3.42.3-4.14.52 in Generic/RPi2 here HiDrive

    - version bump to .3 for removing lvm2, dm-raid (if somebody really wants it: respond in this thread)

    - clean build

    - kernel update 4.14.52

    Hello

    Thank you in advance for your great work. I use a NAS with software RAID and found your project today. I thought that I probably will not find an image with RAID support.

    I am not sure if I understand it correctly, but in the images "LibreELEC-Generic.x86_64-8.2.5-1.42.1 to 8.2.5-6.42.3" the software RAID (mdadm) still included. However, in your future and your latest testing build you have removed this. Did I understand that correctly?

    I would be very happy if you could include support for software RAIDs (mdadm) in your future releases. Does not necessarily have to be included in the experimental releases.

    I would be very happy about positive feedback.

    Thanks in advance.

    Greetings

  • mdadm is in x. 42.1 and x. 42.2 but no longer in x. 42.3

    I will consider to bring it back.

    Benjamin Wille

    What hardware exactly is you NAS or the system where libreelec should run and what TV FHD or 4k? If it is not newer than apollo lake or kaby lake you are fine with my 8.2.5-1.42.1 with full lvm2 and mdadm raid support and you dont need updates. All the updates i do is for newer hardware.

    Edited 2 times, last by sky42 (July 5, 2018 at 8:16 PM).

  • some updates ... what was done:

    8.2.5-6.42.3-4.17.6 in Generic here HiDrive

    - full release post #123 (plus following lines)

    - kernel 4.17.6

    - synced kernel config from LE master 4.17.6

    - updated improve-ir-timeout-handling patch from LE master 4.17.6

    - updated Gemini Lake GLK HDMI bugfix now V4 from LE master 4.17.6

  • mdadm is in x. 42.1 and x. 42.2 but no longer in x. 42.3

    I will consider to bring it back.

    Benjamin Wille

    What hardware exactly is you NAS or the system where libreelec should run and what TV FHD or 4k? If it is not newer than apollo lake or kaby lake you are fine with my 8.2.5-1.42.1 with full lvm2 and mdadm raid support and you dont need updates. All the updates i do is for newer hardware.

    sky42

    Excuse my late reply, I was on vacation and will test the image you mentioned tonight.

    I have a Kaby Lake server, so nothing new.

    Thanks for your effort.

    Greetings

  • some updates ... what was done:


    8.2.5-3.42.3-4.14.61 in Generic, RPi2 here HiDrive

    - kernel 4.14.61

    - synced RPi2 kernel patches from LE master 4.14.54

    - removed ir-mce_kbd-decoder.c patches, now in upstream kernel 4.14

    - added wpa_supplicant: Fix EAPOL vulnerability [backport] by MilhouseVH · Pull Request #2874 · LibreELEC/LibreELEC.tv · GitHub

    - update Intel Microcodes to 20180807 Spectre/Meltdown protection up to v3a/4 (at least for my i3-4010U)

    - update Nvidia driver to 390.77


    8.2.5-6.42.3-4.17.14 in Generic here HiDrive

    - full release post #123 (plus following lines)

    - kernel 4.17.14

    - synced kernel config from LE master 4.17.6

    - updated improve-ir-timeout-handling patch from LE master 4.17.6

    - removed ir-mce_kbd-decoder.c patches, now in upstream kernel since 4.17.12

    - Gemini Lake GLK HDMI bugfix now v5 in upstream kernel since 4.17.12 (v4 patch removed)

    - added wpa_supplicant: Fix EAPOL vulnerability [backport] by MilhouseVH · Pull Request #2874 · LibreELEC/LibreELEC.tv · GitHub

    - update Intel Microcodes to 20180807 Spectre/Meltdown protection up to v3a/4 (at least for my i3-8100)

    - update Nvidia driver to 390.77

    Edited 2 times, last by sky42 (August 9, 2018 at 8:28 PM).

  • Hi,

    I have finally received my new Intel Gemini Lake NUC NUC7CJYH. I was able to install skys custom Libreelec build "8.2.5-6.42 kernel 4.17 for UHD 630 / Coffee Lake / Gemini Lake". All is working good except the 4K 60Hz I was only able to get 4K 30Hz. I hope somebody already has solved this issue and can describe what I do wrong here. Each help is really appriciated. I use the following equipment.

    - Intel Nuc NUC7CJYH

    - Denon AVR X3200W 4K Receiver

    - LG UC970V 4K TV

    best regards René

  • That is kind of tricky. All 3 components need to do the right thing. 4k UHD does not mean also with 60Hz. Look in the specs of you TV and AVR (deep). The NUC is capable of doing it, but there could be a firmware problem in all of the 3.

    Look here (with ssh on the NUC) "less /sys/kernel/debug/dri/0/i915_display_info" and you see what the GPUs is willing to do with the connected hardware. Also try direct connect to the TV and look again. If that works connect the second HDMI to the AVR just for audio. My setup works that way with a i3-8100, because my Onkyo 818 AVR does not do 4k, but my LG TV 55E6D does. Sometimes it is one of the HDMI cables, but just some times when they are old. My Onkyo as a example can scale up to 4k on the Output, but HDMI Inputs are only capable of Full HD 1920x1080.

  • That is kind of tricky. All 3 components need to do the right thing. 4k UHD does not mean also with 60Hz. Look in the specs of you TV and AVR (deep). The NUC is capable of doing it, but there could be a firmware problem in all of the 3.

    Look here (with ssh on the NUC) "less /sys/kernel/debug/dri/0/i915_display_info" and you see what the GPUs is willing to do with the connected hardware. Also try direct connect to the TV and look again. If that works connect the second HDMI to the AVR just for audio. My setup works that way with a i3-8100, because my Onkyo 818 AVR does not do 4k, but my LG TV 55E6D does. Sometimes it is one of the HDMI cables, but just some times when they are old. My Onkyo as a example can scale up to 4k on the Output, but HDMI Inputs are only capable of Full HD 1920x1080.

    Hi Sky,

    thanks for your help. I tried already an direct conncetion with two different TVs. Both are 4K 60Hz cabable. I have also an H96 Pro+ Android TV Box and here all is working fine including 4K 60Hz. So I believe the problem is on the NUC side.

    best reagards René

  • careful the next 2 i have just compiled, but no tests so far

    some updates ... what was done (just the changes):


    8.2.5-6.42.3-4.18 in Generic here HiDrive

    - clean build, but no testing so far

    - kernel 4.18 with config from milhouse PR2880

    - backported linux (Generic): update to linux-4.18 by MilhouseVH · Pull Request #2880 · LibreELEC/LibreELEC.tv · GitHub

    - new kernel-firmware from LE master

    - xorg-server pci_id patch update from 1.20.1

    8.2.5-7.42.3-4.18 in Generic here HiDrive

    - clean build, but no testing so far

    - exactly like 6.42.3-4.18

    plus

    - LLVM 6.0.0

    - Mesa 3D 18.1.6


    rene12345

    2 new versions to test if you like.

    The NUC has the latest BIOS and is there also HDMI Firmeware (like the older ones)? The last thing i would test is BIOS settings UEFI only with no CSM (my i3-8100 is running that way) or the last one no UEFI at all, after that i would become desperate and try windows 10 to see if it is doing 4k 60 Hz at all.

  • Hi,

    still the same with the new image. I have also checked the supported resolutions on the command line:

    So it looks like it is supported but not available in Kodi.

    regards René