Remote control

  • Hello all,


    I can not get my remote control to work, I extracted the remote.conf file from android and followed some modifications but none seems to enable the remote control, running version 8.2.2.3 on cpu S912 without any problem using a mini wireless keyboard with dongle, the remote control is the issue. any help please?


    Thank you

    Edited once, last by guil70 ().

  • It might help others help you if you’d mention the remote type/model used

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

  • look in the remote thread remote.conf repository


    You still haven't told us the name of the device.

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 H96 Pro (Coreelec), Fire TV 4K Stick (Bedroom)

    Synology DS414 Plex Pass

    :)

  • Oef. Looks like some no-name exotic model.

    Look at the thread mentioned by bubblegum57 and try some of those, see which one works best. You could always remap with the keymap editor in Kodi afterwards

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

  • Yes and for mecool bb2 pro also, I downloaded that one and pasted it in Configfiles folder using windows sharing and nothing, still no work, and really the remotes are the identical, any suggestion?

  • II will do a try

    Thank you

    Did you copy the remote file


    to storage\config renaming your remote file to remote.conf


    then reboot

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 H96 Pro (Coreelec), Fire TV 4K Stick (Bedroom)

    Synology DS414 Plex Pass

    :)

  • Ok correct me, if something is wrong...


    1- I open usb partition by doing this from windows 7,

    \\XX.X.X.XX (device ip)


    2- Enter in folder Configfiles


    3- paste the copied file remote.conf


    4-reboot


    Remote does not work


    Here is the remote.config I got from android, I would like you to take a look, I am fully new on this, 48 hours ago I knew cero,

    I am using CoreELEC-S912.arm-8.9.0 build, I also tested LibreELEC 8.2.2.3 S912 and remote did not work either.



    #name of map table

    # custom_code: custom code for remote device

    # release_delay unit:ms.release will report from kernel to user layer after this period of time

    # from press or repeat triggered.

    ###PARAS FOR MOUSE MODE:

    # fn_key_scancode: scancode of fn key which used to swith mode

    # cursor_left_scancode: scancode of left key

    # cursor_right_scancode: scancode of right key

    # cursor_up_scancode: scancode of up key

    # cursor_down_scancode: scancode of down key

    # cursor_ok_scancode: scancode of ok key

    #*************************************************************************************************************

    custom_name = vs-cursor

    custom_code = 0xff00

    release_delay = 80


    fn_key_scancode = 0x12

    cursor_left_scancode = 0x5a

    cursor_right_scancode = 0x1b

    cursor_up_scancode = 0x06

    cursor_down_scancode = 0x16

    cursor_ok_scancode = 0x1a


    key_begin

    #video strong

    0x59 116 #power

    0x19 113 #mute

    0x0e 130 #info

    0x0d 102 #home

    0x51 14 #del

    0x12 134 #mouse

    0x4d 137 #epg //没找到

    0x11 237 #dtv


    0x45 125 #menu

    0x05 1 #exit


    0x06 103 #up

    0x5a 105 #left

    0x1a 97 #enter

    0x1b 106 #right

    0x16 108 #down


    0x55 104 #page+

    0x15 109 #page-


    0x52 2 #1

    0x50 3 #2 //没着到匹配的

    0x10 4 #3

    0x13 115 #vol+


    0x56 5 #4 //没着到匹配的

    0x54 6 #5

    0x14 7 #6

    0x17 114 #vol- //没着到匹配的


    0x4e 8 #7 //没着到匹配的

    0x4c 9 #8

    0x0c 10 #9

    0x0f 11 #0


    0x4a 121 #fr //没着到匹配的

    0x48 120 #ff

    0x08 122 #prev

    0x0b 123 #next


    0x46 119 #play/pause //没着到匹配的

    0x44 128 #stop

    0x04 56 #pvr

    0x07 132 #repeat


    0x42 134 #red

    0x40 133 #green //没着到匹配的

    0x00 131 #yellow //没着到匹配的

    0x03 140 #blue //没着到匹配的


    0x1f 212 #fav

    0x58 261 #app

    0x18 70 #browser //没着到匹配的


    0x0e 136 #audio //没着到匹配的

    0x09 135 #subtitle


    0x60 160 # red

    0x61 161 # green

    0x62 162 # yellow

    0x63 163 # blue


    0x02 130 #info

    0x01 136 #audio //没着到匹配的

    0x21 52 #.

    0x22 127 #search

    0x64 164 #pvr list

    key_end


    Any idea how to modify this one in order to be used in the build I am using?

  • The remote conf, is only for 8.2. XX builds,


    from 8.9 the remote is configured in a totally diifferent way LE9.0 remote configs ir-keytable Amlogic devices


    To browse the device, I use coreftp lite,


    path for remote.conf is IP address\storage\config (folder)

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 H96 Pro (Coreelec), Fire TV 4K Stick (Bedroom)

    Synology DS414 Plex Pass

    :)

  • Thank you, may you help me with coreftp lite setup?, I try to connect to ip adreess and it constantly says ,


    Connect socket #876 to xx.x.x.xx, port 21...

    Can't establish connection --> xx.x.x.xx:21 @ Sun Apr 22 02:11:52 2018 (0-5)

    Edited once, last by guil70 ().

  • In coreftp lite


    Create a session


    put ip address in


    user root


    password coreelec this is for builds after 8.9 libreelec for 8.2.


    port 22


    connection SSH/SFTP

    Samsung RU7400 Onkyo HTX22HDX Nvidia Shield HD Homerun Duo (Living Room)

    Samsung UE40ES5500 H96 Pro (Coreelec), Fire TV 4K Stick (Bedroom)

    Synology DS414 Plex Pass

    :)

  • CvH

    Changed the title of the thread from “Remoto control” to “Remote control”.
  • Getting this with that setup..., any idea


    Resolving xx.xx.x.xx...

    xx.x.x.xx connecting...

    SSH-2.0-OpenSSH_7.7

    dh-group1-sha1 not specified

    crypto error, disconnecting...

    SFTP connection error