if you're using a x8(x8h) or x8-hplus, you need to repatch the bootloader see #1
is perfect ok
if you're using a x8(x8h) or x8-hplus, you need to repatch the bootloader see #1
is perfect ok
Hello,
I have a neo x8-ha few years without touching the rom of origin OTA (4.4.2) and after this time i decide to see how the alternative roms were and I did not find anything special,
however I found this forum with the hypothesis of installing Libreelec and after the reading the first post i tried to install and nothing
I hope I'm not doing something wrong:
1 install LibreELEC.USB-SD.Creator.Win32 (in windows 10)
2 places an SD
3 install with Libreelec.usb the img LibreELEC-X8-X8H.arm-9.0-devel-20181005064202-197066a.img
4 go to sd and rename "boot_autoscript" to "boot.scr"
5 copy from device_trees minix_x8h_sdhc.dtb to root dir and remane to dtb.img
6 put the sd to minix neo x8-h and boot up with the system with the switch for 5 -6 sec
and
always goes to recovery screen ......
Do I have to do something before this procedure?
Is there any step missing?
with the minix forum down I do not know what else to do, so Any help
Thanks
5 copy from device_trees minix_x8h_sdhc.dtb to root dir and remane to dtb.img
not needed
Do I have to do something before this procedure?
if it's a really old Minix firmware, i would update the Minix to FW009 (latest one i think). a too old android firmware may give troubles
I hope I'm not doing something wrong
you're not doing something wrong
with the minix forum down
Minix quality/services is gone with Minix-Ken's departure.
i would not recommend anymore to buy a Minix product....
My pov.
not needed
if it's a really old Minix firmware, i would update the Minix to FW009 (latest one i think). a too old android firmware may give troubles
you're not doing something wrong
Ok thanks, Im gone try to get last firmware and udate and then do the procedure.
Minix quality/services is gone with Minix-Ken's departure.
i would not recommend anymore to buy a Minix product....
My po
well, Sincerely if I can get libreelec runing well in the neo X8-h Im gone keep it but if not.... hello Raspbery Pie 3
PS: really thanks for the help
Hi Datrh,
do you think you can update your Lakka build to be compatible with this one? I'm really missing it now. I installed emulators directly on Kodi, but the lag between the remote press and the real action just makes games unplayable.
I also tried retropi with a RPI3, but to be honest your build was a lot better.
What I really would like was a version I could dual-boot (LE, LAKKA), but booting from SD and reading from internal would also be great.
Also, sometimes, mostly when opening internet streams I get a black screen with audio. Then I just skip back and video starts normally... Are you guys experiencing the same?
Thanks a lot!
do you think you can update your Lakka build to be compatible with this one?
x8/x8-H or X8HP or U1 ?
#1 and #2 updated
Hi,
in HDMI passthrough mode, i have no sound for video with 2.0 channels.
Fixed : see post #1
When playing DTS / AC3 video and pressing "o" key there is codecs summary
In my case (Minix X8H) it says that audio channels have 8-bit depth while in Kodi running on Android it says 32 or 24 bits
Is there any solution for this ? Am I doing something wrong ?
Fixed
Hi Datrh,
do you think you can update your Lakka build to be compatible with this one?
Thanks a lot!
almost done (wifi broken and shutdown do a restart )
btw the old lakka should be "boot" compatible.
almost done (wifi broken and shutdown do a restart )
btw the old lakka should be "boot" compatible.
see #3
see #3
thanks man! Gonna try it as soon as I can. This is great
Looool!
Just realised that the X8HP is still building
Looool!
Just realised that the X8HP is still building
Just out of curiosity... how long does it take to build such an image?
Just out of curiosity... how long does it take to build such an image?
a few hours if you don't have a "file system full"
edit : need to make clean and rebuild , got some strange behaviours
a few hours if you don't have a "file system full"
edit : need to make clean and rebuild , got some strange behaviours
well... got problem with one package , need to figure out why.
so meanwhile if you don't mind that the wifi will not be available you may use the x8-x8h img.
just replace the dtb.img by the one from the X8HP LE-kodi 18 image.
Hello everyone, this is my first mail in this forum.
I have a minix x8-h and ROM Finless 1.0 Android 5.1. I run LE from the SD card and everything seems to work correctly (except static IP) until I do not restart (option in Kodi) - all settings disappear (not saved) and I have a clean Kodi again. Has anyone encountered a similar case? How can you upgrade Kodi Leia to beta 5 and then to the final version (when it will be available)?
Regards.