TVHeadend problem

Hello

I have long had a problem with TVHeadend. The problem is that when I turn on a channel, it disappears after a while and needs to be buffered again. It takes a while and it makes me nervous.

I have an HTPC with a DVBSKY 952 card

I do not know what else I can give to help find the error? Maybe some logs?

Satellite installation is diseqc 2/1 Hotbird 13E and Astra 19.2E

Theoretically, I have everything set up well.

This is not RPi0-3. I have a computer based on intel kay lake.

Procesor Intel Pentium G4600

gigabyte ga-z170x-gaming 7

8GB ram

geforce 1050

DVBSKY 952

I noticed that sometimes under windows (dvbviewer recorder) and kodi also such a problem appeared to me, but there the picture buffered practically immediately.I do not know what it could be. I prefer to use LibreELEC but it is annoying. I will also tell you that I used to have an enigma2 decoder and never had such problems with the same satellite installation.

This is my log file

Sendspace.com Mobile File

service.log

service.log - 6c686e54

Do you mean EPG configuration files? If so, where to find them?

Picons are showing me so they are well configured.

For 2h, when I go home I turn off the "idle scan" and check the effects.

In the log it seems to me that at 20:10 the movie stopped working and buffered again. In the log I noticed this error:

2017-11-02 20:10:17.033 [  ERROR] tsfix: transport stream H264, DTS discontinuity. DTS = 1827804, last = 926004
2017-11-02 20:10:17.036 [  ERROR] tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 1801440, last = 892080
2017-11-02 20:10:17.036 [  ERROR] tsfix: transport stream MPEG2AUDIO, DTS discontinuity. DTS = 1801440, last = 892080

Hello CvH.

I have a problem with the option: Use predictive tuning to speedup channel switches

In general, the channels switch very quickly. However, there are 3 channels on which the switching is very slow. HBO 2 HD, HBO 3 HD, H2 HD. Do you have an idea what the cause is and can you do something about it?

This is the log of the new Generic-tvheadend42-4.3-654.

It's a lot worse. Much more channels do not turn on.

service.log - cd0de41b

I'll check in a few days. Currently I am waiting for a new processor for my HTPC and I have no way to check.

It is much worse at 4.3-628 build.

service.log - c1b1b787

I installed this image but the symptom is the same. Any further ideas? Currently, he is testing VDR and so far there are no problems like in TVHeadend. It does not break the signal when watching and switching channels. Unfortunately, you can switch between channels and I can not set the diseqc hotbird and astra 19.2. Currently I have a hotbird but when I turn on diseqc it stops working.