Adding a swap partition for hiberating

Hello,

I would like to enable hibernation (aka suspend to disk) support to my LibreELEC powered Raspberry Pi 3B (in fact it's Lakka but it doesn't matter). I added CONFIG_HIBERNATING=y to the linux.arm.conf file. When I want to compile LibreELEC, it asks me for a hibernation swap partition, which is required (and must be enabled before hibernating).

When I looked at LibreELEC, I saw that we could create a swap file, but not a swap partition, which is understandable. But in order to hibernation to work, I need a swap partition. So here is my question : how can I add a swap partition to my SD card (or an external drive it doesn't matter), and is it possible to automate this process in the compilation process (because you know, creating a swap by hand each time I burn the image to the SD card is not optimal) ?

Thanks for your help

Quote

Lakka is reasonably similar to LE, but not entirely.

The core system part is the same, isn't it ?

Quote

However, the swap mounting process will use a pre-existing swap partition if present in preference to a swap file.

So I need to create the partition and put it in the swap.conf ? Or will it be created by the swap service ?

The partition needs to be created in the IMG file, before the first filesystem expansion, right ? So I must create it somehow during the system compilation, let's say in /dev/sdb3, and put /dev/sdb3 in the swap.conf file ?

Quote

no idea whether it also works as a hybernation partition; we don't support that function so you need to experiment. Content of swap.conf can be figured out looking at the URL that I posted.

Well I'm going to try and see if it works !

Quote

In LE: create a swap partiion after installing

How can I do this ? I have to resize the storage partition too, can this be done with Gparted on the host computer ?

Quote

Does an RPi3 even support hibernation? How do you come out of hibernation?

I saw that it was supported using pm-hibernate. To come out of hibernation you can just unplug the power and put it back in (which will be done using a ATXRaspi in my case). I also saw that if the RPi is powered, you can join two specific GPIOS together to wake it up, this is used to make cheap power buttons for instance

Quote

I think the issue here is whether the host is correctly saved. If it is then, you shouldn’t have an issue. However my thoughts are why bother!

The goal is to make a portable game console, and I would like to have the ATXRaspi power button perform an hibernation instead of a shutdown.

This way, I can play my game, and when I want to stop I press the power button, which will send a hibernation signal to the RPi, thus pausing the game. Then, the ATXRaspi will cut the power to save battery life (this is why it's interesting). When I press power again, the Rpi will be powered and will resume its activity, showing up the game exactly as I left it !

edit : Okay so I enabled everything, activated the swap... and when I do systemctl hibernate, it doesn't do anything but freezing the SSH server... meh, it doesn't look so supported after all. Is there a way to achieve what I would want without hibernation ?

Wow that's actually very slow !

Implementing a smaller state is very possible, and I already thought about it. I basically have to store the core (emulator) used along with the running game, make a save state and then shut down the RPi. On next boot I'll check if such a state is existing and reload the core, game and the save state. I know how RetroArch works, I think I can implement this myself... I'll give it a try !

edit : I can even do simpler by using the autosave/autoload feature and a modified version of the RetroArch service and ATXRaspi script

It's for a portable project, with a battery, leaving it on is not an option

The Linux kernel configuration for the system has the ARCH_HIBERNATION_SUPPORTED flag set to true, so I thought that it was OK, but apparently it's not

I don't know what standby mode refers to, but I don't think it will work since the power needs to be cut in order to my power button to work.

When I press the power button the ATXRaspi will send a shutdown command to the RPi which will shutdown (duh). Then, the ATXRaspi will detect that a GPIO is low and will cut the power. When I press it again it will power it back up and wait for a specific GPIO to turn high to stop the fancy LED blinking.

So standby mode or any other suspend to RAM method will not work if I'm willing to use the ATXRaspi.