This release uses same kernel version as 7.0.2.004.4. I'll double check config and patches.
Posts by afl1
-
-
I think there's still problem about stuttering live tv. This time it's worse than Jarvis build though.I will try to reproduce problem and get a log if I have time. Just to make a quick note here to see if someone got this issue like mine.
When playing live tv for a while (not long, maybe 10-20 mins.) the video stream will get buffering and a/v out of sync. When this happens it's permanent. Stop channel and play again won't solve until reboot. But remote clients (via tvheadend service) still play from the box without any issue.
I am only adapting internal driver, Kodi issues are discussing in kszaq's thread. Yesterday was released Kodi Krypton 17.0 beta6. I'll prepare new update. -
Thank you for your awesome work!This is the first time 7.90 alpha is starting without "can't access tty" error at my k1 plus.
Krypton looks very nice, and is running very smooth.
The only issue I got is, that I can't access it using ssh or webif (tvheadend).
ssh is working for a few seconds after kodi starts but stops after.I have this issue using wifi (can't test wired).
I looks like weak wifi. In box is only small patch antenna (2dBi). Good idea is open box and install external antenna e.g. from old wifi AP.
[hr]
Noob question, sorry for disturbing...I have written the image to sd card via "Win32DiskImager", replaced the dtb.image file form my Kii Pro, put the card in the SD slot and starts from nand...
How to have the device start from SD directly?..
Attached contents of SD card.
Sorry for taking time again...
On bottom side is in the middle on right side small hole. Under this hole is reset switch. Push it with pin during power up for 15 sec. -
Unfortunately encyrption key request for the new link...
[emoji23]
Fixed.
[hr]
afl1 if I send you over the remote.conf for the k1plus can you put it into the next build please?Thanks
The remote.conf for KI_Plus and KII_Pro is included in /etc/remote.conf and it is working. You can check it via ssh. Pls, delete all other remote.conf's.
-
I added in #1 HD audio passthrough version, no analog audio .
quitroot
This version is build on older kernel from 7.0.2.005 version. Driver adaptation to the latest kernel still in progress.
[hr]
Thanks for the new development.Krypton build is awesome.
Testing now (with KII Pro). So far so good.
One advantage, for me personally, is that SD channels play smooth, no stuttering anymore, both with local playing and streaming to other clients.For SD resolution I switched off hw acceleration by default. There is enough power for SW decoding. SW decoding fixed aspect ratio switching.
-
-
I stopped development LE 8.0, for the latest version use kszaq's thread.
For fixing IR issue install remote.conf in /storage/.config via ssh session (user/password: root/libreelec)
For Tvheaden42 set following options:
- for every standard Maximum PIDs: 26
- Configuration ->Channel/EPG->EPG Grabber Modules->Over-the-Air: EIT: DVB Grabber->EnabledOlder builds
For installation instructions refer to 7.0 builds, e.g. LibreELEC
Warning!
KI Pro has Android 7.1 (Nougat) and command 'installtointernal' doesn't copy correctly device tree blob for Nougat.
After this command you have to use my workaround #1254 to fix dtb.
For Tvheaden42 set following options:
- for every standard Maximum PIDs: 26
- Configuration ->Channel/EPG->EPG Grabber Modules->Over-the-Air: EIT: DVB Grabber->EnabledFor updating to new version, copy .tar file to /storage/.update/ and reboot box.
2017-06-22
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.2c-I.img.gz
Image is prepared for KI Plus.
For Pro versions you have to replace corresponding device tree blob (dtb.img): KI_Pro.dtb, KII_Pro.dtb
Update image:
LibreELEC-S905.arm-8.0-8.0.2c-I.tar
Changelog:
- added support for CVBS output: if HDMI is not connected, Kodi will default to output mode provided by u-boot, i.e. CVBS on devices with that type of output
- added PR#11159 to enable overriding disp_cap (for details: [AML] read display modes optionally from file by peak3d · Pull Request #11159 · xbmc/xbmc · GitHub)
- added HDMI connection monitoring service: if disp_cap is empty, Kodi will restart as soon as you plug HDMI/turn on your device to provide all display modes.
- added CXD2820R tuner module thanks to a patch from codesnake
- live tv faster channel switch and timeshift fix.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.2c
The latest TVHeadend (8.1.112 version 4.2.2-49) from LibreELEC repository is correct now and recommended.
2017-06-15
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.2b-I.img.gz
Image is prepared for KI Plus.
For Pro versions you have to replace corresponding device tree blob (dtb.img): KI_Pro.dtb, KII_Pro.dtb
LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro with support for internal tuner.
This build is based on kszaq's LibreELEC 8.0.Update image:
LibreELEC-S905.arm-8.0-8.0.2b-I.tar
Changelog:
- Kodi:
- updated to 17.4 RC1 g21c2dba
- added PR#12145 to improve SMB performance
- faster start when "wait on network" is not selected
- removed libamplayer.so error
- fix for faster channel switching
- switched to OpenSSL:
- better performance, especially AES on KI Pro
- fixes issue with certificates valid >20 years
- LibreSSL libraries are included for addon compatibility - thanks to escalade for the idea!
- re-applied H.264 decoder flag to fix live TV stuttering
- enabled fq_codel in the Linux kernel to better deal with network congestion (thanks koenkooi )
- kernel performance improvements
- boot speed optimizations
- DVB-C annex A fix
Source code: GitHub - afl1/LibreELEC.tv at 8.0.2b
2017-05-29
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.2a-I.img.gz
Image is prepared for KI Plus.
For Pro versions you have to replace corresponding device tree blob (dtb.img): KI_Pro.zip, KII_Pro.zip
Update image:
LibreELEC-S905.arm-8.0-8.0.2a-I.tar
Release Notes:
- Kodi Krypton 17.3
- kernel MM g286e7e1
- ffmpeg 3.3
- Kodi live TV: more stable faster channel switching.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.2a
The latest TVHeadend (8.1.111 version 4.2.2) from LibreELEC repository is buggy. Use my version 4.2.2-35 service.tvheadend42-8.1.111a.zip!!!
2017-05-12
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1k-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image:
LibreELEC-S905.arm-8.0-8.0.1k-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 git c6420b5
- media_build 2017-04-17-rpi
- Kodi: live TV fixes for faster channel switching.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.1k
2017-05-06
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1j-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image:
LibreELEC-S905.arm-8.0-8.0.1j-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 git 661dd08
- media_build 2017-04-17-rpi
- Kodi: fix for av sync2017-04-28
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1i-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image:
LibreELEC-S905.arm-8.0-8.0.1i-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 git 661dd08
- media_build 2017-04-17
- Kodi: faster channel skippingSource code: GitHub - afl1/LibreELEC.tv at 8.0.1i
2017-04-25
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1h-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1h-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 Git 7f7f7e8
- media_build 2017-4-17
- Kodi: relaxed late frame processing
- Kodi: fix in chapter skippingRecommended pvr.hts-3.4.22.1.zip with timeshift fix.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.1g
2017-04-23
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1g-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1g-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 Git 7f7f7e8
- media_build 2017-4-17
- fixes in amlogic hw decodingRecommended pvr.hts-3.4.22.1.zip with timeshift fix.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.1g
2017-04-16
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1f-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1f-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 Git 7f7f7e8
- media_build 2017-3-22 with Astrometa HybridT2 support
- fixes from parent 8.0.1f buildRecommended pvr.hts-3.4.22.1.zip with timeshift fix.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.1f
2017-04-08
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1e-I.img.gz
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1e-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 Git f8d6cd1
- media_build 2017-3-22
- fixes from parent 8.0.1e buildRecommended pvr.hts-3.4.21.1.zip with timeshift fix.
Source code: GitHub - afl1/LibreELEC.tv at 8.0.1e
2017-04-06
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1d-I.img.gz
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1d-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 Git f8d6cd1
- media_build 2017-3-22
- fixes from parent 8.0.1d buildRecommended pvr.hts-3.4.21.1.zip with timeshift fix.
2017-04-05
Image for SD card version:LibreELEC-S905.arm-8.0-8.0.1c-I.img.gz
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1c-I.tar
Release Notes:
- Kodi Krypton 17.2 RC1 Git f8d6cd1
- media_build 2017-3-22
- changes from parent 8.0.1c build2017-03-25
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-8.0.1a-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.1a-I.tar
Release Notes:
- Kodi Krypton 17.1 final
- internal dvb driver - fix for DVB-C annex B (ATSC-C).Recommended tvheadend version for this build: service.tvheadend42-8.1.114.zip + pvr.hts-3.4.19.1.zip
Source code: GitHub - afl1/LibreELEC.tv at 8.0.1a
2017-03-15
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-8.0.0f-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.0f-I.tar
Release Notes:
- Kodi Krypton 17.1-RC2 Git 9637da6;
- faster channel switching - experimental;
- RC audio button - next audio track.Recommended tvheadend version for this build: service.tvheadend42-8.1.114.zip + pvr.hts-3.4.19.1.zip
Sources: GitHub - afl1/LibreELEC.tv at 8.0.0f
2017-03-06
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-8.0.0d-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.0d-I.tar
Release Notes:
- Kodi Krypton 17.1-RC2 build e3c872f;
- fixed internal dvb tuner scanning issue.Recommended tvheadend version for this build: service.tvheadend42-8.1.113.zip + pvr.hts-3.4.19.1.zip
In tvheadend limit 'Maximum PIDs' to 26 (DVB Inputs -> TV Adapters).Sources: GitHub - afl1/LibreELEC.tv at 8.0.0d
2017-02-25
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-8.0.0c-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.0c-I.tar
Release Notes:
- Kodi Krypton 17.1-RC1 build 1a80820;
- keyframe sync at playback startupRecommended tvheadend version for this build: service.tvheadend42-8.1.110c.zip + pvr.hts-3.4.17.zip
Sources: GitHub - afl1/LibreELEC.tv at 8.0.0c
2017-02-21
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-8.0.0a-I.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip
Update image for internal installation:
LibreELEC-S905.arm-8.0-8.0.0a-I.tar
Release Notes:
- Kodi Krypton 17.1-RC1
- version following kszaq's buildSources: GitHub - afl1/LibreELEC.tv at 8.0.0a
2017-02-14
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-7.95.beta6a-20170214112050.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- back to Kodi Krypton 17.0 - final2017-02-12
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-7.95.beta6-20170212173536.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.1-RC1
- fixed SD format playback issue;
- updated firmware for internal dvb tuner;
- fixed fractional frame ratesSources: GitHub - afl1/LibreELEC.tv at 7.95.beta6
2017-02-07
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-7.95.beta5N-20170208144157.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- new internal DVB-Sx/Tx/C driver;
- support for Xbox one controllerSources: GitHub - afl1/LibreELEC.tv at 7.95.beta5N
2017-02-06
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-7.95.beta5b-20170206161635.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- removed waiting for a key frame in Amlogic decoder2017-02-05
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-7.95.beta5-20170205181729.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 final;
- CrazyCat69 media_build (2017-01-22) to allow additional USB-DVB drivers;
- loadable internal dvb driverwith experimental support for DVB-C annex-A, annex-B;
- KII Pro - fix for internal bluetooth;
- kernel updateNew pvr.hts: pvr.hts-4.0.6.zip
Sources: I'll publish them soon.2017-01-24
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-7.90.beta3-20170124084432.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 RC3;
- CrazyCat69 media_build (2016-12-28) to allow additional USB-DVB drivers;
- loadable internal driver;
- dtb fix for USB ports;
- kernel updateSources: GitHub - afl1/LibreELEC.tv at 7.90.beta3
2017-01-13
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-20170113120409-r23566-k3f3c6f3.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 RC3Sources: GitHub - afl1/LibreELEC.tv at 7.90.beta1
LibreELEC 7.90 (alpha) builds for KI Plus / KII Pro with support for internal tuner.
This build is based on kszaq's LlibreELEC 7.90.2017-01-12
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-20170112101054-r23565-k64cf5c2.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 RC2
- 32bit build
- added more external USB tuners;2017-01-10
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-20170110201651-r23564-k64cf5c2.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 RC2
- 32bit build
- support for external USB tuners;
- internal tuner driver update;
- libcec 4.0.1;
- updated kernel2016-12-31
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-20161231120653-r23563-gc3df916.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 RC2
- 32bit build
- pvr addons from Libreelec repository2016-12-30
Image for KI Plus, SD card version:LibreELEC-S905.arm-8.0-devel-20161230175754-r23563-gc3df916.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- 32bit build based on kszaq's version 2016-12-232016-12-27
Image for KI Plus, SD card version:LibreELEC-S905.aarch64-8.0-devel-20161227015458-r4-gb0d686b.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- fixed RC codes
- kernel with latest kszaq's improvements
- Mali driver reverted to r5p1
- pvr addons still not in Libreelec repository, install from zip - pvrs-17b7.zip
For install to internal flash use ssh command: installtointernal2016-12-23
Image for KI Plus, SD card version:LibreELEC-S905.aarch64-8.0-devel-20161223180220-r4-gb0d686b.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release Notes:
- Kodi Krypton 17.0 beta 7
- latest kernel, dtb is incompatible with previous version
- pvr addons still not in Libreelec repository, install from zip - pvrs-v17b6.tar.gz2016-11-30
Image for KI Plus, SD card version:
HD audio passthrough, no analog audio version:LibreELEC-S905.aarch64-8.0-devel-20161130143159-r4-gb0d686b.img.gz
Analog audio version:
LibreELEC-S905.aarch64-8.0-devel-20161129150935-r4-gb0d686b.img.gz
For KII Pro replace device tree blob (dtb.img) with KII_Pro.dtb
Release notes:
- Kodi Krypton 17.0 beta5;
- HDMI CEC driver;
- suspend mode;
- this release is only for SD card, don't try it install to internal. -
Great news.
1. What about kii pro it's should work with the same build?.
2. Do both dvb-t2, dvb-s2 working?
3. Kszaq can add it with is future releases?.
4. What is the ljavls source?.Thanks in advance.
This release is not for use, driver is buggy and unable to stream data. Only to demonstrate running driver adding dvb device Availlink AVL6862. In tvheadend is possible attach DVB network to driver and start scanning. In kernel log (dmesg) is a lot debugging messages about successful setting tuner and demodulator but with problem to lock demodulator.
For KII Pro is necessary different dtb.img to activate ethernet and wifi.
Sorry I mistyped ljalves author of TBS5520 driver build on similar chipset avl6882/r848.
And public is public open source free to use. -
Work on internal driver in progress. Still buggy, but now is running, no crashing.
For preview my working SD card version for KI Plus build on latest kszaq's Krypton Alpha version.
LibreELEC-S905.aarch64-8.0-devel-20161118075313-r4-gb0d686b.img.gzDevice tree blob is in image.
Final stage will be public internal driver build on ljalves sources able to run under latest amlogic linux kernel.
-
very much transporters is fail because I do not have all the channels hotbrid 13E2016-11-04 23:01:45.777 mpegts: 12731H in 13E - scan no data, failed - UHD
2016-11-04 23:01:35.767 mpegts: 12692H in 13E - scan no data, failed
2016-11-04 22:39:12.064 mpegts: 10723H in 13E - scan no data, failed - [font]wrong frequency [/font](lyngsat.com)
2016-11-04 22:39:22.165 mpegts: 10775H in 13E - scan no data, failed - Central Asia
2016-11-04 22:39:32.275 mpegts: 10853H in 13E - scan no data, failed
2016-11-04 22:39:52.275 mpegts: 10815H in 13E - scan no data, failed - Russian channels
2016-11-04 22:48:03.165 mpegts: 12539.02H in 13E - scan no data, failed - unused transponder
2016-11-04 22:48:13.237 mpegts: 11919V in 13E - scan no data, failed
2016-11-04 22:57:01.818 mpegts: 12322H in 13E - scan no data, failed - Russia, KurdistanIt is impossible to receive all transponders from Hotbird, becaase every transponders has its own beam direction and can hapend it is out of your country. Also UHD is still not correctrly supported and at last check parameters for transporder. In downloaded database is lot of wrong values.
-
Final results of the scan FAIL
means scan OK.FAIL scan has message:
-
Can You please explain me what kind of problem for you causing this warning message?
-
Thanks for your work afl1.
Unfortunately, we still are problems
linuxdvb: Availink AVL6862: DVB-S # 0 - failed to config dmx for pid 474 [e = Operation not permitted]full log tvh:
GY35in7GI don't see any problems. Log for transponder 11526H 13E shows the scan was successfully completed.
Code
Display More2016-11-04 22:44:33.216 mpegts: 11526H in 13E - tuning on Availink AVL6862 : DVB-S #0 2016-11-04 22:44:33.219 tbl-eit: 11526H in 13E: registering mux eit 2016-11-04 22:44:33.222 subscription: 0042: "scan" subscribing to mux "11526H", weight: 5, adapter: "Availink AVL6862 : DVB-S #0", network: "13E", service: "Raw PID Subscription" 2016-11-04 22:44:43.315 mpegts: 11526H in 13E - scan no data, failed 2016-11-04 22:44:43.315 subscription: 0042: "scan" unsubscribing 2016-11-04 22:44:43.315 mpegts: 11526H in 13E - tuning on Availink AVL6862 : DVB-S #0 2016-11-04 22:44:43.317 tbl-eit: 11526H in 13E: registering mux eit 2016-11-04 22:44:43.318 subscription: 0045: "scan" subscribing to mux "11526H", weight: 5, adapter: "Availink AVL6862 : DVB-S #0", network: "13E", service: "Raw PID Subscription" 2016-11-04 22:44:48.656 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 474 [e=Operation not permitted] 2016-11-04 22:44:48.656 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 475 [e=Operation not permitted] 2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 476 [e=Operation not permitted] 2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 477 [e=Operation not permitted] 2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 521 [e=Operation not permitted] 2016-11-04 22:44:53.315 mpegts: 11526H in 13E scan complete 2016-11-04 22:44:53.315 subscription: 0045: "scan" unsubscribing 20
"failed to config dmx..." means this kind of service is unsupported by this receiver. I tested this transponder in my box with 30 scanned services (lot of radios) and status OK. I can watch SRF info HD, SRF 1 HD and SRF 2 HD. -
Update for Tvheadend.
service.tvheadend42-7.0.107.zipRelease notes:
- optimize for K1 Plus and K2 Pro;
- fix for TIMEOUT during mux scanning;
- UHD muxes have issue with NIT (only Fashion 4k on Astrta 19.2E is correctly scanned);
- dvb-t has bug in driver, impossible to fix in tvheadend;
- latest sources for tvheadend, h264 and hevc codecs; -
@alf1 thanks for sharing your build!
I'm using your build for few days and it's working great on my beelink minimxiii 2/16.
Iptv channels starting in 2-3 seconds, on 16.1 kodi I have to wait 12 seconds to get started.
I have no buffering problems and videos playing smoothly (1080i 50hz) over NAS and internet streaming. (Without additional advancedsettings.xml settings)
Only remote didn't recognize, so i have to install it manually.
One small problem is that I have to restart pvr plugins that you compiled (vu+ and simpleiptv) every time I start kodi, it's not recognized on start... But it's no big dealI closed support for this thread as kszaq released Krypton version. Continue on this thread: [WIP] LlibreELEC 7.90 (alpha) builds for S905/S905X
-
kszaq Thanks for nice release.
I don't believe the playback in Jarvis is more reliable. The codesnake's idea to use video4linux in Krypton is big improvement in video playback.
I like to notice about "improvement" in Krypton beta4. In this version all live streaming (pvr) is set to "playback to display" and causing disable audio passthrough. e.g. In audio passthrough setting, stream with ac3 audio track is decoded to multichannel PCM pass to HDMI. And there is issue, during channel switch appears very disturbing noise. I fixed this issue in my test release by following patch:
Diff
Display More--- a/xbmc/cores/VideoPlayer/DVDInputStreams/DVDInputStreamPVRManager.cpp 2016-10-24 23:42:53.000000000 +0200 +++ b/xbmc/cores/VideoPlayer/DVDInputStreams/DVDInputStreamPVRManager.cpp 2016-10-26 21:51:45.485211657 +0200 @@ -691,7 +691,7 @@ dStream->language[1] = stream.strLanguage[1]; dStream->language[2] = stream.strLanguage[2]; dStream->language[3] = stream.strLanguage[3]; - dStream->realtime = true; + dStream->realtime = false; m_newStreamMap[stream.iPID] = dStream; }
If you prefer decoding you can set it in Playback settings.
-
Dude what codec do you disable and what do you enable for optimum playback of all files?
Pls, read complete thread and don't ask for fixed issues! -
thank you!!!Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Fixed #1