[8.0.2e] LibreELEC 8.0 for S905/S905X

  • LibreELEC 8.0 builds for Amlogic S905/S905D/S905X devices.

    Read this first: [HOWTO + FAQ] Install community builds on S905/S905X/S912 device

    Important notes:

    • These are unofficial, community supported builds so please post all bugs/issues in this forum area only.
    • I work on these builds in my free time. I also don't know a lot of things so please be kind and patient if you encounter any bugs.
    • Bugs? Read this first: [READ FIRST] Reporting bugs
    • You can update from 7.0 to these builds but you can't downgrade. I recommend a clean install.
    • Older builds are available at Index of /s905
    • if you choose a device tree with LIRC support, you have to configure your remote control from the scratch (amremote cannot work toghether with LIRC)!

    Note on downloads:

    • for Odroid-C2 download image with -C2 suffix
    • for every other device use image without suffix...
    • ..unless you are experiencing freezing: then use -temp_sensor_disabled version

    8.0.2e (2017-07-04)

    Downloads: Index of /s905/8.0/8.0.2e/
    Device trees: Index of /s905/8.0/device_trees/

    Source code: 8.0.2e

    Changelog:

    • added Odroid-C2 build (a bit experimental for now)
    • Kodi: updated to a261e06
    • ffmpeg: updated to 3.1.9
    • media_build: reverted to 2017-04-17
    • fixed LIRC with meson-ir (for built-in IR receiver)
    • improved DVB-T scanning for built-in "K" series tuners
    • updated QCA9377 firmware
    • re-added ge2d patch to hopefully fix Hyperion

    Known issues and important notes:

    • If you use S905X device the screen will be darker than normal on boot. It goes back to normal after you start/stop a video.
    • Built-in DVB tuners are supported only for "K" series devices and WeTek Play 2. For "K" series I use driver from afl1 with some modifications, please do not report issues with the driver to him! If you want support, please use builds from afl1.
    • Supported internal WiFi chips: Broadcom (all), Realtek (all) and Qualcomm QCA9377. Other chips, e.g. 9082xs and SSV6051 are not supported because manufacturers show middle finger on every driver request.
    • 4K support is experimental.
    • 3D and HDR are not supported, i.e. they might work but I don't provide support. For automatic 3D switching you may want to try installing "ODroid C2 - 3D autoswitch" addon from LE repo
    • CEC might not work when your box has incompatible u-boot or your TV is not that well supported by Amlogic low-level CEC driver.
    • External DVB tuner support is experimental via media_build drivers from CrazyCat69.


    If you like my work, you can buy me a coffee silver-pill-paypal-26px.png (or without PayPal account: link)

    Older builds

    8.0.2d (2017-06-27)

    Downloads: Index of /s905/8.0/8.0.2d/
    Device trees: Index of /s905/8.0/device_trees/

    Source code: 8.0.2d

    Changelog:

    8.0.2c (2017-06-20)

    Downloads: Index of /s905/8.0/8.0.2c/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.2c

    Changelog:

    • added support for CVBS output: if HDMI is not connected, Kodi will default to output mode provided by u-boot, i.e. CVBS on devices with that type of output
    • added PR#11159 to enable overriding disp_cap (for details: [AML] read display modes optionally from file by peak3d · Pull Request #11159 · xbmc/xbmc · GitHub)
    • added HDMI connection monitoring service: if disp_cap is empty, Kodi will restart as soon as you plug HDMI/turn on your device to provide all display modes.
    • added internal DVB tuner from afl1 PLEASE NOTE: This is experimental and I cannot provide support. If you want support, please use builds from afl1. Please don't report issues to the driver, it has been modified slightly and not everything may work!
    • added RTC (Real Time Clock) support for Minix U1 and Khadas VIM - for Minix U1 please remember to update device tree
    • improved Khadas VIM compatibility
    • added CXD2820R tuner module thanks to a patch from codesnake
    • fixed non-important upgrade script regression introduced in 8.0.2b

    8.0.2b (2017-06-12)

    Downloads: 8.0.2b
    Device trees: Index of /s905/8.0/device_trees/
    Source code: 8.0.2b

    Changelog:

    • Kodi:
      • updated to 21c2dba
      • added PR#12145 to improve SMB performance
      • faster start when "wait on network" is not selected
      • removed libamplayer.so error
    • switched to OpenSSL:
      • better performance, especially AES on S905X
      • fixes issue with certificates valid >20 years
      • LibreSSL libraries are included for addon compatibility - thanks to escalade for the idea!
    • re-applied H.264 decoder flag to fix live TV stuttering
    • enabled fq_codel in the Linux kernel to better deal with network congestion (thanks koenkooi)
    • kernel performance improvements
    • boot speed optimizations

    8.0.2a (2017-05-28)

    Downloads: Index of /s905/8.0/8.0.2a/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.2a

    Changelog:

    • Kodi:
      • updated to 17.3 final
    • merged all changes from official LibreELEC 8.0.2
    • reverted kernel to Marshmallow version which means:
      • no more issues with 4K output
      • fractional frame rates can no longer be chosen in Kodi display settings - they turn on automatically during video playback
      • HDR handling is different - better or worse? I cannot decide, no equipment here
      • "full Nougat" kernel is in the works, no ETA!

    8.0.1l (2017-05-19)

    Downloads: Index of /s905/8.0/8.0.1l/

    Device trees: Index of /s905/8.0/device_trees

    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1l

    Changelog:

    • Kodi:
      • updated to ce4d3ba
      • added PR#12074 to lower CPUGPU load when idle (thanks @peak3d and koen)
      • added the latest lateframes and VSync patches from afl1 after positive reports from users
      • fixed picture freezing after HD->SD channel switch
    • reverted some experimental kernel audio patches
    • reverted a CEC patch that caused it not to work sometimes
    • merged all upstream LE 8.0 changes

    8.0.1k (2017-05-14)
    Downloads: Index of /s905/8.0/8.0.1k/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1k

    Changelog:

    • Kodi:

      • re-added demux buffering up to 2 seconds that I removed in drain patch
      • reapplied: increase rendering thread priority - this has an effect only with sync playback to display turned on
      • amended lateframes patch to fix some stuttering it introduced
      • backported NFS chunk size patch from Kodi master
      • added a workaround for stalls on FF/RW or chapter seek
      • dropped chapter seek patch from afl1
    • bumped minimum CPU speed to 500MHz to improve system reaction speed in some cases


    8.0.1j (2017-05-02)
    Downloads: Index of /s905/8.0/8.0.1j/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1j

    Changelog:

    • Kodi:

      • removed experimental patches from afl1 to fix a/v sync issues
      • added lateframe amendment to fix some stuttering (thanks to afl1 for an idea)
    • remove all SDIO WiFI modules on suspend to limit crashing - suspend is still experimental!


    8.0.1i (2017-04-30)
    Downloads: Index of /s905/8.0/8.0.1i/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1i

    Changelog:

    • Kodi:

      • chapter skip/channel switch improvements from afl1
      • fixed a regression regarding high bitrate videos playback
    • CEC improvement from GDPR-1
    • THD/Atmos fix
    • backported Ethernet driver from Nougat kernel
    • re-enabled suspend (experimental!)


    8.0.1h (2017-04-23)
    Downloads: Index of /s905/8.0/8.0.1h/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1h

    Changelog:

    • media_build drivers updated to 2017-04-17
    • Kodi:

      • fixed channel switching
      • reverted patch that added parsing of extended disp_cap formats - let's see if this fixes 4K for you


    8.0.1g (2017-04-18)
    Downloads: Index of /s905/8.0/8.0.1g/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1g

    Changelog:

    • Kodi:

      • fixed hardware decoding stuck at the end of video
      • reverted thread priority patch
      • updated framerate automation patch to switch resolution only when needed


    8.0.1f (2017-04-16)
    Downloads: Index of /s905/8.0/8.0.1f/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1f

    Changelog:

    • audio-related changes:

      • re-applied LE kernel audio patches to fix 44.1kHz output
      • added WIP patches from Kwiboo to further improve kernel driver
      • fixed Dolby Atmos with patches from LE kernel
      • 176.4kHz and 192kHz might be working now on S905X
    • framerate automation changes:

      • improved Amlogic-Nougat style fractional frame rate handling in Kodi
      • reverted some kernel changes that may have caused blackouts
    • Kodi:

      • implemented drain in AMLCodec to fix 2 seconds missing from the end of video
      • increased renderer thread priority to fix some stutters


    8.0.1e (2017-04-08)
    Downloads: Index of /s905/8.0/8.0.1e/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1e

    Changelog:

    • new approach to fractional frame rates (a bit experimental but working OK here)
    • fixed choppy playback of some H.264 videos (e.g. UK DVB-T)
    • smoother playback menu
    • added a proper VC-1 fix from @peak3d
    • trimmed initramfs a little


    8.0.1d (2017-04-06)
    Downloads: Index of /s905/8.0/8.0.1d/
    Device trees: Index of /s905/8.0/device_trees/

    Changelog:

    • Kodi updated to fc82741 (latest Krypton branch update)
    • fixed video size after 720p -> 1080p/4K resolution switch
    • added parsing of extended 2160p formats to Kodi (see LibreELEC for explanation)
    • fixed ES8323 analog audio noise on boot (for Minix U1)


    8.0.1c (2017-04-04)
    Downloads: Index of /s905/8.0/8.0.1c/
    Device trees: Index of /s905/8.0/device_trees/

    Changelog:

    • fixed some regressions after Nougat kernel changes import:

      • re-enabled output_rgb
      • re-enabled Frame Rate Automation
      • fixed picture freeze on H.264 stream error
      • fixed green screen in VC-1 videos
    • adjusted H.264 decoder parameters for videos up to 1920x1080 to fix playback of streams with high reference frame count
    • added a fix for VC-1 decoder from @peak3d to minimize stuttering on B-frames
    • adjusted audio parameters to improve analog audio output


    8.0.1b (2017-03-27)
    Downloads: Index of /s905/8.0/8.0.1b/
    Device trees: Index of /s905/8.0/device_trees/

    Changelog:

    • TEST: import video decoder and display changes from Amlogic Nougat kernel

    8.0.1a (2017-03-23)
    Downloads: Index of /s905/8.0/8.0.1a/
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.1a

    Changelog:

    • Kodi updated to 17.1 final
    • merged all updates from LE 8.0.1
    • removed experimental Aml timing changes


    8.0.0g (2017-03-17)
    Downloads: 8.0.0g
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.0g

    Changelog:

    • TEST: the patch that removes wait on prefill adjusted to not dequeue buffer when buffered size is 0 (might help those with issues on 8.0.0f)
    • Kodi updated to 5814568
    • timeout to kill Kodi process increased to 15s to hopefully prevent settings reset on reboot
    • reverted a patch that disabled setting blackout_policy - no more black screen on seek/channel change
    • suspend is so unreliable that it's now disabled
    • very minor improvement in Kodi process memory management


    8.0.0f (2017-03-15)
    Downloads: 8.0.0f
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.0f

    Changelog:

    • TEST: remove waiting for buffer prefill in Amlogic HW decoder - this may improve channel switching time and seek time
    • improved CPU performance for S905X
    • improvement from LE 8.0 for Bluetooth Audio - the patch should improve audio-over-BT sync

    8.0.0e (2017-03-08)
    Downloads: 8.0.0e
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.0e

    Changelog:

    • Kodi updated to 9637da6 (latest commit in Krypton branch)
    • reverted some of the audio patches from 8.0.0d build to hopefully fix RetroArch/Lakka
    • updated AmlTiming patch
    • fixed remapping 232 key code

    8.0.0d (2017-03-03)
    Downloads: 8.0.0d
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.0d

    Changelog:

    • Kodi updated to e3c872f (latest commit in Krypton branch)
    • added a patch from RPi to bst centre channel when downmixing
    • fixed a bug in CMA release
    • kernel config cleaned up a bit
    • added softvol to audio output to fix Spotify Web Connect addon
    • added support for Minix U1 analog audio - remember to use a dedicated device tree WARNING: when using headphones remember to lower output volume first and turn off "quiet noise generation" in Kodi audio settings!

    8.0.0c (2017-02-23)
    Downloads: 8.0.0c
    Device trees: Index of /s905/8.0/device_trees/
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.0c

    Changelog:

    • Kodi updated to 82eaae9
    • fixed reading ethernet MAC address from eFuse and added reading from nand_env
    • minor improvement in copying user data in installtointernal script
    • experimental: better scaling of Mali cores for smoother GUI
    • experimental: backport Kodi PR11713: Search backwards for keyframe when resuming playback


    8.0.0b (2017-02-20)
    Downloads: 8.0.0b
    Source code: GitHub - kszaq/LibreELEC.tv at 8.0.0b

    Changelog:

    • merged all updates from LE 8.0.0
    • Kodi updated to b0bc68b
    • fixed AP6210 Bluetooth
    • reverted NAND module deferred loading
    • small optimization for update process on SD card/USB drive
    • experimental: backport Kodi PR11646: fix edl skipping
    • added support for remotesecond.conf (LibreELEC)
    • disabled forced deinterlacer for all progressive videos to improve PQ
    • speed and size improvements


    7.95.beta6 (2017-02-11)
    7.95.beta6
    Source code: GitHub - kszaq/LibreELEC.tv at 7.95.beta6

    Changelog:

    • merged all updates from LE 7.95.3
    • Kodi updated with latest post-final patches from Krypton branch
    • fractional frame rates are (hopefully) fixed now
    • experimental: allow audio passthrough for live TV (thanks afl1 for the patch!)
    • speed and size improvements


    7.95.beta5b (2017-02-05)
    7.95.beta5b
    Source code: GitHub - kszaq/LibreELEC.tv at 7.95.beta5b

    Changelog:

    • Kodi 17.0 final
    • merged all upstream updates from official LE 7.95.2
    • optimized kernel size
    • minor boot speed improvements
    • added BCM4335A0/B0 Bluetooth firmware
    • bumped NFS chunk size for possibly improved libnfs performance
    • removed waiting for a key frame in Amlogic decoder to fix some unplayable samples


    7.90.beta4a (2017-01-29)
    7.90.beta4
    Source code: GitHub - kszaq/LibreELEC.tv at 7.90.beta4a

    Changelog:

    • Kodi 17.0rc4
    • merged all upstream updates from LE 8.0 branch
    • WiFi and BT improvements
    • minor performance improvements
    • beta4a: attempt to solve non-working ioctls for DVB tuners


    7.90.beta3 (2017-01-20)
    7.90.beta3
    Source code: GitHub - kszaq/LibreELEC.tv at 7.90.beta3

    Changelog:

    • fixed "Cannot get MTD information for /dev/nand_env" error when setting/reading uenv variables
    • fixed baudrate bump for QCA9377 Bluetooth
    • TEST: bumped baud rate for RTL8723BS Bluetooth to 2000000
    • added experimental MT7601U and MT7603U drivers
    • fixed keyctl syscalls for Docker
    • minor performance improvements


    7.90.beta2 (2017-01-15)
    7.90.beta2
    Source code: GitHub - kszaq/LibreELEC.tv at 7.90.beta2

    Changelog:

    • applied the latest updates from upstream LE, including Kodi 17.0rc3
    • updated Amlogic patch for Kodi and kernel to fix VC-1 playback @Peak3D
    • fixed non-working factory remote buttons by reverting an upstream patch
    • disabled AML_I2C to possibly fix some external DVB tuners
    • TEST: bumped QCA9377 Bluetooth baud rate to hopefully fix BT Audio issues


    7.90.beta1 (2017-01-12)
    7.90.beta1
    Source code: GitHub - kszaq/LibreELEC.tv at 7.90.beta1

    Changelog:

    • applied the latest updates from upstream LE, including Kodi 17.0rc1
    • added a/v sync improvements from @Peak3D
    • fixed freezing when trying to play some MP4 videos (LibreELEC)
    • added a Python hack to improve 32-bit userspace detection in addons using platform.machine() (e.g. Spotify)
    • fixed Bluetooth using hciattach (e.g. Realtek 8723BS)
    • new QCA9377 WiFi driver
    • new QCA9377 Bluetooth driver
    • added an udev rule in hope to fix non-working WiFi on boot (you no longer have to toggle it in settings)
    • fixed Docker support
    • lots of other little tweaks and fixes


    2016-12-23:
    2016-12-23
    Source code: GitHub - kszaq/LibreELEC.tv at 2016-12-23-devel-krypton

    Changelog:

    • applied updates from LE 7.90.010
    • applied all updates from my Jarvis builds
    • added media_build drivers
    • added Frame Rate Automation patch from Codesnake


    2016-12-04:
    2016-12-04
    Use device trees from 7.0.2.009 builds: device_trees
    Source code: GitHub - kszaq/LibreELEC.tv at 9f57b1844af452875a5627fca12cdeb16fa030b8

    Changelog:

    • reverted AP6212 firmware
    • added a few fixes to DVB support (3.14 drivers)
    • updated addons
    • kernel size optimization
    • Mali drivers reverted to r5p1 for smoother GUI
    • small kernel improvements


    2016-12-01:
    2016-12-01
    Use device trees from 7.0.2.009 builds: device_trees
    Source code: GitHub - kszaq/LibreELEC.tv at 2016-12-01-krypton

    Changelog:

    • 32-bit userspace allowing to run ARM addons, including Spotify and libwidevine (thanks to GDPR-1 for bringing the idea into life!)
    • Kodi updated to 17.0beta6
    • LE updated to latest master
    • added temporary fix for audio clicks and pops
    • and many other improvements from my 7.0 builds


    2016-11-09:
    2016-11-09 (use device tree from 7.0.2.009 builds: device_trees)
    Source code: GitHub - kszaq/LibreELEC.tv at 2016-11-09-krypton
    Changelog:

    • fixed LibreELEC addons
    • Kodi updated to latest Git (81dfeb6) - without Estuary which stays in line with current LE master
    • LE updated to latest master


    2016-11-07:
    2016-11-07 (use device trees from 7.0.2.009 builds: device_trees)
    Source code: GitHub - kszaq/LibreELEC.tv at 2016-11-07-krypton
    Changelog:

    • Kodi updated to latest Git (908061e) - without Estuary which stays in line with current LE master
    • kernel updated to be in line with 7.0.2.009
    • updated AP6212 and added AP6212a firmware
    • added experimental Aigalie WiFi drivers
    • bumped dynamic_buf_margin for HEVC
    • LE updated to latest master


    2016-10-28 (deprecated):
    2016-10-28 (use device trees from 7.0.2.008 builds: device_trees)
    Source code: GitHub - kszaq/LibreELEC.tv at 2016-10-28-krypton

    Edited 21 times, last by kszaq (July 25, 2017 at 8:00 AM).

  • i'm downloading now, hope joystick will functioning, ps3 controller way much better than original remote, i dont even remember where i thrown that remote :dodgy:


  • Have you considered use the mainline kernel from GitHub - LibreELEC/linux-amlogic: the Linux kernel for Amlogic SoC devices for this new branch?

    Will be the development more easy with mainline kernel + patch vs own fork?


    At this point I forked the LE kernel repo as I use more WiFi drivers and older Mali for better performance. I plan to gradually separate the drivers from kernel tree (like it's done in LE) and eventually I will switch to LE kernel + patches approach. You may have also heard that at some point S805 and S905 support will be merged into main LE repo. It will still be considered a "community build" (i.e. not fully supported) but much easier to find and contribute to.

  • Hi Kszaq, i cannot restore Addons from Jarvis to Krypton build...
    Any idea how i can accomplish that ? Thanks in advance.

    Also, by default all the addons from Jarvis are disabled. You need to enable each one from settings.
    Some are not compatible. And in the process of enabling it hangs oft.
    Normally it is quite fast but it really hangs... Not stable yet i mean.

    Anyway... will try and let you know.

    Edited once, last by plikmuny (October 29, 2016 at 9:05 AM).

  • hy kazaq i've got tty error updating from jarvis 008, wether from update folder or replace file manually, anyway did you change any label scheme again?

  • Did a fresh installation.
    The buffer trouble with hevc is still there and the solution works:
    echo 16 > /sys/module/amvdec_h265/parameters/dynamic_buf_num_margin

    In audio setting, I had to lower the thresold from 2 to 0 or I had some audio troubles with some files.

    Tvh client feels faster

    There's fewer info on files when using 'o' or info. Feels like every major kodi update strips more and more info on those screens. I do not like that trend as you have less data for debugging or distro comparison.

    I do not like the overall look/feel/ergonomy. But I can't complain too much as this is an early version.

    Edited once, last by Tidav7578 (October 29, 2016 at 9:05 AM).


  • There's fewer info on files when using 'o' or info. Feels like every major kodi update strips more and more info on those screens. I do not like that trend as you have less data for debugging or distro comparison.

    Hi

    from Codecinfo - Official Kodi Wiki :

    "FUTURE KRYPTON FEATURE:The codecinfo window/overlay normally contains information about the currently playing media, such as video and audio codecs, frame skips, decoding method, etc. Starting in Kodi v17 most of this information has been moved to a new window called PlayerProcessInfo. Default keymaps will be adjusted to use this new window (i.e., the "o" key will automatically use the new window). Custom keymaps should change CodecInfo to PlayerProcessInfo"

    Edited once, last by Fredouye (October 29, 2016 at 9:40 AM).


  • hy kazaq i've got tty error updating from jarvis 008, wether from update folder or replace file manually, anyway did you change any label scheme again?

    Not again, I changed them for the first time. Last time I made them mandatory. ;) Now boot partition label is LIBREELEC and data is LIBREELEC_DATA. This is to be compatible with LE master branch: scripts/mkimage: add label to "disk" partition as well · kszaq/LibreELEC.tv@0973b49 · GitHub

    LibreELEC master introduced partition label after I added them to my Jarvis build, that's why it's been changed for Krypton.

    Edited once, last by kszaq (October 29, 2016 at 9:52 AM).

  • Not again, I changed them for the first time. Last time I made them mandatory. ;) Now boot partition label is LIBREELEC and data is LIBREELEC_DATA. This is to be compatible with LE master branch: scripts/mkimage: add label to "disk" partition as well · kszaq/LibreELEC.tv@0973b49 · GitHub

    LibreELEC master introduced partition label after I added them to my Jarvis build, that's why it's been changed for Krypton.

    ok, got it working, ps3 controller working although the led keep blinking,
    but nevermind, anyway we're ready to play some game now, bravoo kszaq

  • Thank you for the release!It is good.

    Some problem when i switch/toggle fullscreen pvr , reload video.

    I have two crash on start when arrive in home screen.
    But it is normal for alpha version

    Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk


  • Thank you for the release!It is good.

    Some problem when i switch/toggle fullscreen pvr , reload video.

    I have two crash on start when arrive in home screen.
    But it is normal for alpha version

    Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk


    I'm trying pvr and buffer is slow and block without restart

    I'm trying same channels on kodi 17 on android and working fine


    Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk


  • At this point I forked the LE kernel repo as I use more WiFi drivers and older Mali for better performance. I plan to gradually separate the drivers from kernel tree (like it's done in LE)


    Ahh, ok that explain why you are compiling mali as module...

    Use the drivers from /packages/linux-drivers/ instead of kernel modules looks a easy task for a non expert developer. Can I send a PR? just for this new branch or also in master?

  • Is installtointernal meant to work with this? On both this and afl1's Krypton builds I get the message "filesystem corruption has been detected!" after the process completes and reboots. It appears to be working fine from an SD. I'm on a Beelink Mini MXIII with gxbb_p200_2G_1Gbit_RealtekWiFi.dtb.

    Edited once, last by Hans Gruber (October 29, 2016 at 2:12 PM).


  • Is installtointernal meant to work with this? On both this and afl1's Krypton builds I get the message "filesystem corruption has been detected!" after the process completes and reboots. It appears to be working fine from an SD. I'm on a Beelink Mini MXIII with gxbb_p200_2G_1Gbit_RealtekWiFi.dtb.


    Boot again from SD and run installtointernal again. I have the same with my device x96.