Put tar/img.gz and device tree in update folder.
Named as dtb.img or .dtb ? Could you update that in the OP, please, as someone may look for that info as well.
Posts by lama0900
-
-
Sorry for asking, but:
How to update from 8.0.2e when installed to NAND?
Because dtb is not updated when putting tar to update folder or will dtb updated as well, when putting tar to update folder?
-
lama0900 , i know how to convert e2 channel list to vdr or tvh format but vdr to e2 not (I do not know is it possible) . I have own e2 channel list from many years which I updating every time and using with tvh , vdr or my dreambox. It is very easy to manage that list in dreambox edit or dreamset and customize it under our preferences. In tvh or vdr I am not using scanning and mapping channels. I always use my converted e2 list and is perfect
Yes. I'm using a few dreamboxes also. So i've ended setting up TVH for the first time. There EPG is working very good. I don't know why EPG didn't work with VDR. In the beginning of the S905 8.0 releases TVH had a lot of issues with audio sync, but seems fixed.
Thank's anyway.
-
Any way to convert my VDR list to enigma2 and then to tvh?
The TVH web interface is more than overloaded with unneeded stuff.
Channel management is the worst i've ever seen.
What the hell is this mapping channels step.
If someone from TVH devs reads this:
What about this workflow: scan channels, sort channels (make bouquets) and in a user/tvh noob friendly way.
and btw. the wizard is just completely useless, if it only does scanning and, again, mapping the channels.
(another useless fact: if channels are scanned to what should they be mapped to...)
Sorry for being off-topic. The first question fits to topic.
-
Hi kszaq,
I don't know if this is in the right thread now.
You added the driver for DVB for the "K-Series" and I'm using your build with pleasure.
Everything works!
Though I've got a question:
How to get the EPG being loaded properly when using VDR? Some channels are loading the EPG, some do not.
TVHeadend is too much complicated and I don't want to scan my channels again. Just using my channels.conf for VDR is very good.
Is the EPG loading related to the Maximum PIDs, which should be set to 26 according to afl1, but where to do that in VDR?
(This is the part I don't know where to ask, because I don't use his build, but asking some of his recommended settings).
Maybe someone can help me to get my EPG work properly.
Thank you!
-
Thank you afl1 for this great build
I'm baaack with a new KII Pro
Do you know why there is a error while booting which is saying "rpcbind failed"?
Thank's
-
I guess 1GB ram is enough for LiveTV and mainly streaming from USB?
(because K1 Plus only has 1GB/8GB option).. -
You can buy cheap K1 Plus without internal tuner to replace motherboard:
Videostrong K1 Plus Amlogic S905 Android TV Box Unboxing and TeardownSo the tunerboard is 100% the same and working? I read something about be that it might be the same, but don't find the source anymore
Nowhere in stock
Does somebody have a K1 plus with defective tuner board?
-
Could my problem related to HDMI cable?
Frist I used the short one, packaged for playing around in android.
Then I used an old one, which is longer. Now tried with the packaged again.
For now it works...Ok. Felt happy too early.
Seems to be a HW issue, since it happened now again and happens now also in android.
Nearly every time, when I use the box. Sometimes immediately after boot, sometimes later.
Sadly, I opened the device to look for a problem (bent pins from HF-Tuner-Board) but nothing.
But now I cannot return the device either, because there was a sign on one screw.Thank you for your support....
-
Put android .zip update on empty SD card. Use toothpick method to go in recovery mode.
Could my problem related to HDMI cable?
Frist I used the short one, packaged for playing around in android.
Then I used an old one, which is longer. Now tried with the packaged again.
For now it works... -
dtb is only hw description, there are no changes. It look line HW issue. Have you tested box with android?
Not that long, but worked in android for at least that few hours.
There were no issues so far.Should I flash android to internal memory again and try on mSD card? (Can I flash android back to internal via mSD?)
-
If I was seeing graphical corruption like that on a PC I'd say the GPU/GPU's memory was dying or not being cooled correctly.
I had this immediately after powering on for 3 times now, shouldn't be a cooling issue then?
And the box is only 2 or 3 days old.So how to find the issue?! I thought it could be something from wrong dtb,
but didn't find anything newer as for 8.0.1a build? -
Hi,My K II Pro is freezing nearly every time I use it.
This is the screen when the box kills itself, and as you can see on the MUTE symbol from my TV,
there is a really annoying crackling sound, when this screen shows.There is no SSH access possible, when the box does this.
So no log
I've installed the newest build to NAND/eMMC, but used the dtb from "For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip", because there was no hint which dtb to use with 8.0.1e for KII Pro?
Should I update the DTB somehow?!afl1, do you know this issue and maybe how to fix it?
-
Hi,
My K II Pro is freezing nearly every time I use it.
This is the screen when the box kills itself, and as you can see on the MUTE symbol from my TV,
there is a really annoying crackling sound, when this screen shows.There is no SSH access possible, when the box does this.
So no logI've installed the newest build to NAND/eMMC, but used the dtb from "For KII Pro replace device tree blob (dtb.img) with KII_Pro.zip", because there was no hint which dtb to use with 8.0.1e for KII Pro?
Should I update the DTB somehow?! -
Hi,
Can we control the blue LED from K II Pro ?
It's a little bit too bright for my eyesSome "echo 0 > /sys/.. or /dev/" ?
Thank you!
-
PS3 GPU is 7x faster than S905.Addition: the PS3 is not what I would call retro
-
Anything new to that?
-
Will that get fixed in Kodi v17 at all?
codesnake could bring some light into the dark.
