Hello. I hope this is the correct forum for this question. Not sure what information is needed.
I am using LibreELEC on my Raspberry.
I am using a wired network.
I have a gateway router provided by ISP (192.168.1.1) with my own router serving as a Switch (?) actually two one on each end of house (old house and wifi doesn't work very well).
The "switches" are 192.168.1.111 and 192.168.1.112.
Raspberry is connected to the switch.
I can SSH to the Raspberry. But from the device I can't seem to see the network - pinging gateway or switch or any device times out
There is no /etc/network or /etc/networking directory so not really sure where the networking settings are store...
This is the networking information I can see...
LibreELEC:~ # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
LibreELEC:~ # netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
I swear this all worked at one point.
Thanks for any advice.
