Hi all,
I'm having some problem with the media center USB remote control connected to a X86 laptop and libreelec:
Code
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
Driver mceusb, table rc-rc6-mce
Supported protocols: unknown other lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
Enabled protocols: lirc nec rc-6
Name: Media Center Ed. eHome Infrared
bus: 3, vendor/product: 0471:060c, version: 0x0101
Repeat delay = 500 ms, repeat period = 125 ms
It's almost a year that I'm using the Milhouse nightly build releases and I noticed that starting from the release:
Code
LibreELEC (community) Version: devel-20170407212644-#0407-gf3caa55
LibreELEC git: f3caa554927846aca7c85bb723b9c9f7f90cce70
http://milhouse.libreelec.tv/builds/master/Generic/LibreELEC-Generic.x86_64-9.0-Milhouse-20170407212644-%230407-gf3caa55.tar
my remote control stopped to work properly.
Basically when a remote key is pressed, it's like it's pressed twice.
For instance: when the up key is pressed on the main menu, the cursor moves two items up.
I don't have any particular configuration saved on my /.config/ folder (I always used the default configuration provided)
Instead, I don't have any problem with the day before release (the last release that works for me):
Code
LibreELEC (community) Version: devel-20170406210249-#0406-gf3caa55
LibreELEC git: f3caa554927846aca7c85bb723b9c9f7f90cce70
http://milhouse.libreelec.tv/builds/master/Generic/LibreELEC-Generic.x86_64-9.0-Milhouse-20170406210249-%230406-gf3caa55.tar
Any help?
Thank you in advance for your response.
Regards.