S802 devices

@Deezel defintely worth checking inside to see what wifi chip is in there. The M8 build has working wifi running on an M8S+ which has the AP6330 chip.

i believe it is the rtl8188

Confirmed.. it is defo the rtl8188 as i just opened it up to check.

not sure if this is helpful but i found these files in the openelec version i'm using on the trmk1.

Hi there,

tried to update my latest codesnake build for M8 wich worked on my mxiii 2g S802 and after reboot got stuck on this error: could not mount /flash/SYSTEM

cant acess tty: job control turned off

lol weird

i typed exit comand and restarted and updated but i cant see no letters on the menus, managed to restart again and the problem persists

How can i fix or restore librelec install?

Should i try to update the tar file again?

updated to restore and it finished the install, and a no go, some letters where not showing on the menus, then i restarted again and it worked, everything is working fine i suppose, at least it shows up fine.

seems like iam talking to myself but i was writing and testing, seems like problem solved if someone as the same error by updating with tar.

thanks for all the work of devs responsible for this and for the support.

I'e a problem with CEC with one of my Philips TV. The newer recognise only UP-down ok back... And action is done when i press The Numbers of The TV remote while, in The older Philips or panasonic they're working fine. If you need i can provide some debug info if you let me know how, Thanks for The great work!

Hi drieschel

first of all thanks for your hard work

i have a round s82 s802

Buy Products Online from China Wholesalers at Aliexpress.com

and i have flashed it with
LibreELEC-S802.S82.arm-7.0.2-2-devel.zip

and its works like a charm

when i try to flash it with the LibreELEC-S802.S82.arm-8.0.0-2-alpha-devel.zip i get signature failed

any ideas whats could be wrong

/ Stainless

Quote from TheCondor

Just upgrade from OE to LE 7.0.2-2 for my MX-III 2GB and finally it's possible to save the IP assigned over reboot...

I have a MXIII 2GB box as well, which exact version of the LE firmware did you use? MXIII-1G, S82, M8 or T8?
Your answer will save me a lot of trial and error!

Thanks Drieschel! I'll try that one!
What do you recommend? Installing it via SD and hidden button or via first going to the recovery menu and then selecting EXT > sdcard? I want to install it on NAND.

Update:
I found it out. The best way to flash it, is first to flash it by USB Burning tool to stock Android and then flash it via microSD via the hidden update button method. First impressions are good, everything seems to work. If I encounter issues I will report.

I found an issue with the LibreELEC-S802.S82.arm-7.0-devel-20160815122240-r23306-gd4a3717.zip firmware on an MX-III 2GB box:

When selecting an output audio device in system settings, the only choices are:

Output audio device:

• ALSA: AML-M8AUDIO, Analog
• ALSA: AML-M8AUDIO, S/PDIF
• PULSE: Default, Bluetooth Audio (PULSEAUDIO)

But no:

• ALSA: AML-M8Audio, HDMI

This option is needed when you connect your box to a AV Receiver via HDMI and it gets its audio signal via Passthrough. This output audio device is present in M8S+ versions of LibreElec

@drieschel

I flashed your bulid for the M8 s802 and notice the remote doesnt work... and I think the problem is because on your github the file is called amremote.config instead of just remote.config...

amremote

would you mind if you have time fixing this and uploading a new bulid...

thanks allot for your time and keeping this box going.

Hi,
First thanks for bringing libreelec to the s802 and supporting it
*i have the vega s89H with libreelec v8 and the beelink s85 with libreelec v7

So, installed the LibreELEC-S802.S82.arm-8.0.0-2-alpha-devel
And it works pretty well.. except
Im a usbdac user (audioquest dragonfly 1.2 and 1.5)
With volume set to max...little sound..with sw amplifier set to max..i get low sound
I tried.. spdif/direct/ch upscaling.. etc, but no joy

Any hits/advice

Hi

I have the vega s89H with Openelec instaled internal memory (NAND) , I want Install Libreelec ,
I do not know which version to use and also do not know how to install, someone could help me

Quote from lordblade2000

Hi

I have the vega s89H with Openelec instaled internal memory (NAND) , I want Install Libreelec ,
I do not know which version to use and also do not know how to install, someone could help me

Hi,
Download the zip file...
Extract : i will see 2 file's (sometimes 3)
Take a sdcard...format as fat32
Copy the extract files to the sdcard
Poweroff s89...place sdcard in device
Inside the av-port is the reset button use toothpick hold button
Powerup s89 while holding button down...10sec release
Now you are at androids recovery : update should start
*If not..select update from sdcard..select zip
Done..

Goodluck

V7= more userfriendly and stable
V8=is alpha version...but seems to work oke

Quote from mitchell4you

Hi,
Download the zip file...
Extract : i will see 2 file's (sometimes 3)
Take a sdcard...format as fat32
Copy the extract files to the sdcard
Poweroff s89...place sdcard in device
Inside the av-port is the reset button use toothpick hold button
Powerup s89 while holding button down...10sec release
Now you are at androids recovery : update should start
*If not..select update from sdcard..select zip
Done..

Goodluck

V7= more userfriendly and stable
V8=is alpha version...but seems to work oke

Display More

Thanks Friend

I can update only put the file (tar) in the Update folder openlec

You can update using tar... but
I always used the zip file with method stated above (on my s85)
*no data, like favorites or addons are lost (separate partition)

Cheers

oke.. V8 - just using this post...I update as I go
error msg kodi log:
caesinkalsa:: handle errors(pcm_write - error 19 :no such device
error:unable to load libamplayer.so not open shared object file: no such file or dir
error gl yuv2rgbglslshader unsupported format

libreelec log...
pastbin/twnuPVbA =system log
pastbin/bHqVSJ0h =audio.log
pastbin/0amcL9KS =kodi.log1
pastbin/dqLMUin7 =Kofi.log2

debug showing CPU usage :s89h is idling at 24%
160% = 1 core always 100% / 1core always 60%...other just sleeping =was when I opened the Kodi.log (even after X)

Quote

stainlessdk Wrote: Hi drieschel

first of all thanks for your hard work

i have a round s82 s802

[url=http://www.aliexpress.com/item/S82-Andro…7b-bfb25362506f]S82-Andro...b25362506f[/url]

and i have flashed it with
LibreELEC-S802.S82.arm-7.0.2-2-devel.zip

and its works like a charm

when i try to flash it with the LibreELEC-S802.S82.arm-8.0.0-2-alpha-devel.zip i get signature failed

any ideas whats could be wrong

/ Stainless

Display More

The signature should be okay but I will try on one of my boxes!

did you try and see if it worked ?