[x86-64][LibreELEC x CB1 Builds] Dolby Vision FEL, HDR10+ and Full 3D

  • I just upgraded my Libreelec mini-pc from a Celeron-based device to a 3500U just for this amazing DV version. It's working great but I seem to have one small issue. After startup, I'd play something and there would be no audio. I checked the audio settings and noticed that my LG C9 on HDMI #1 has defaulted to HDMI #0. I manually set it back to HDMI #1 and all is well until the next restart. I did run "getedid create" but I have always used that.

    It's the same HDMI cable I've been using for years with the old box, so I assume that's okay.

    I don't know if this is a Libreelec-DV issue or a general one but any suggestions would be appreciated

    "getedid create" is used when you have no display connected, like headless setup. You dont need it if you have a connected display. Here is the summary from forum here: Purpose: It bypasses device power-on sequence requirements or allows an x86_64 LibreELEC system to operate without a physical TV/monitor attached (headless mode).

  • "getedid create" is used when you have no display connected, like headless setup. You dont need it if you have a connected display. Here is the summary from forum here: Purpose: It bypasses device power-on sequence requirements or allows an x86_64 LibreELEC system to operate without a physical TV/monitor attached (headless mode).

    My TV and LE box are powered on remotely. Without getedid create, if the LE box starts first it doesn't read the TV and you get a black screen. It is a common and accepted solution to this issue

  • I am just beginning to test some of my media using the Firebat F1 with CroqueMr mod. While testing some DVD rips and TV recordings, the videos seem too dark. I compared to a Dune HD Duo Cinema 8k and it is much brighter. Can't find the setting to affect the brightness.

    The videos with Dolby Vision P7 with FEL seem to be perfect.....

    Try setting System -> Display -> Colour range to "Limited (16-235)"

  • I just upgraded my Libreelec mini-pc from a Celeron-based device to a 3500U just for this amazing DV version. It's working great but I seem to have one small issue. After startup, I'd play something and there would be no audio. I checked the audio settings and noticed that my LG C9 on HDMI #1 has defaulted to HDMI #0. I manually set it back to HDMI #1 and all is well until the next restart. I did run "getedid create" but I have always used that.

    It's the same HDMI cable I've been using for years with the old box, so I assume that's okay.

    I don't know if this is a Libreelec-DV issue or a general one but any suggestions would be appreciated

    okay, it's not a Libreelec-DV issue. I discovered that getedid create is not supported for AMD. I forced the audio output in advancedsettings instead and all is well

    Just thought I mention it in case anyone else has the same problem