Ah, yeah it could be the switch to iris. I was under the impression that the iris driver was considered in good shape, but I suppose this could be a corner case. Put the following in /storage/.config/profile.d/mesa.conf:
That will set the variable for the sway process and tell Mesa to use the old driver.
I do not have anything in that directory but a readme file
Create it.
just throw that one line in there and im good? does it need to be formatted in any way?
Yes just like that. Afterwards run systemctl restart sway.
ibreELEC:~ # systemctl restart sway
Job for sway.service failed because the control process exited with error code.
See "systemctl status sway.service" and "journalctl -xe" for details.
LibreELEC:~ # systemctl status sway.service
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor pre>
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27>
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
Main PID: 1436 (code=exited, status=1/FAILURE)
...skipping...
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor pre>
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27>
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
Main PID: 1436 (code=exited, status=1/FAILURE)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
...skipping...
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor pre>
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27>
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
Main PID: 1436 (code=exited, status=1/FAILURE)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
...skipping...
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor pre>
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27>
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
Main PID: 1436 (code=exited, status=1/FAILURE)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor pres et: disabled)
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27 18:30:13 CST; 263ms ago
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
Main PID: 1436 (code=exited, status=1/FAILURE)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
...skipping...
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor pres et: disabled)
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27 18:30:13 CST; 263ms ago
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
Main PID: 1436 (code=exited, status=1/FAILURE)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
...skipping...
● sway.service - Sway session
Loaded: loaded (/usr/lib/systemd/system/sway.service; disabled; vendor preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27 18:30:13 CST; 263ms ago
Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)pres Main PID: 1436 (code=exited, status=1/FAILURE)
~ Active: activating (auto-restart) (Result: exit-code) since Thu 2020-02-27 ~8:30:13 CST; 263ms ago
~ Process: 1436 ExecStart=/usr/bin/sway.sh (code=exited, status=1/FAILURE)
~ Main PID: 1436 (code=exited, status=1/FAILURE)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~og file is already in use (press RETURN)
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
LibreELEC:~ # journalctl -xe
Feb 27 18:33:18 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:18 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:18 LibreELEC systemd[1]: Failed to start Sway session.
Feb 27 18:33:18 LibreELEC systemd[1]: Dependency failed for Mako notification daemon.
Feb 27 18:33:18 LibreELEC systemd[1]: mako.service: Job mako.service/start failed with result 'dependency'.
Feb 27 18:33:20 LibreELEC systemd[1]: sway.service: Scheduled restart job, restart counter is at 91.
Feb 27 18:33:20 LibreELEC systemd[1]: Stopped Sway session.
Feb 27 18:33:20 LibreELEC systemd[1]: Starting Sway session...
Feb 27 18:33:20 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:20 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:20 LibreELEC systemd[1]: Failed to start Sway session.
Feb 27 18:33:20 LibreELEC systemd[1]: Dependency failed for Mako notification daemon.
Feb 27 18:33:20 LibreELEC systemd[1]: mako.service: Job mako.service/start failed with result 'dependency'.
Feb 27 18:33:22 LibreELEC systemd[1]: sway.service: Scheduled restart job, restart counter is at 92.
Feb 27 18:33:22 LibreELEC systemd[1]: Stopped Sway session.
Feb 27 18:33:22 LibreELEC systemd[1]: Starting Sway session...
Feb 27 18:33:22 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:22 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:22 LibreELEC systemd[1]: Failed to start Sway session.
Feb 27 18:33:22 LibreELEC systemd[1]: Dependency failed for Mako notification daemon.
Feb 27 18:33:22 LibreELEC systemd[1]: mako.service: Job mako.service/start failed with result 'dependency'.
Feb 27 18:33:25 LibreELEC systemd[1]: sway.service: Scheduled restart job, restart counter is at 93.
Feb 27 18:33:25 LibreELEC systemd[1]: Stopped Sway session.
Feb 27 18:33:25 LibreELEC systemd[1]: Starting Sway session...
Feb 27 18:33:25 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:25 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:25 LibreELEC systemd[1]: Failed to start Sway session.
Feb 27 18:33:25 LibreELEC systemd[1]: Dependency failed for Mako notification daemon.
Feb 27 18:33:25 LibreELEC systemd[1]: mako.service: Job mako.service/start failed with result 'dependency'.
Feb 27 18:33:27 LibreELEC systemd[1]: sway.service: Scheduled restart job, restart counter is at 94.
Feb 27 18:33:27 LibreELEC systemd[1]: Stopped Sway session.
Feb 27 18:33:27 LibreELEC systemd[1]: Starting Sway session...
Feb 27 18:33:27 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:27 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:27 LibreELEC systemd[1]: Failed to start Sway session.
Feb 27 18:33:27 LibreELEC systemd[1]: Dependency failed for Mako notification daemon.
Feb 27 18:33:27 LibreELEC systemd[1]: mako.service: Job mako.service/start failed with result 'dependency'.
Feb 27 18:33:29 LibreELEC systemd[1]: sway.service: Scheduled restart job, restart counter is at 95.
Feb 27 18:33:29 LibreELEC systemd[1]: Stopped Sway session.
Feb 27 18:33:29 LibreELEC systemd[1]: Starting Sway session...
Feb 27 18:33:29 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:29 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:29 LibreELEC systemd[1]: Failed to start Sway session.
Feb 27 18:33:29 LibreELEC systemd[1]: Dependency failed for Mako notification daemon.
Feb 27 18:33:29 LibreELEC systemd[1]: mako.service: Job mako.service/start failed with result 'dependency'.
Feb 27 18:33:31 LibreELEC systemd[1]: sway.service: Scheduled restart job, restart counter is at 96.
Feb 27 18:33:31 LibreELEC systemd[1]: Stopped Sway session.
Feb 27 18:33:31 LibreELEC systemd[1]: Starting Sway session...
Feb 27 18:33:31 LibreELEC systemd[1]: sway.service: Main process exited, code=exited, status=1/FAILURE
Feb 27 18:33:31 LibreELEC systemd[1]: sway.service: Failed with result 'exit-code'.
Feb 27 18:33:31 LibreELEC systemd[1]: Failed to start Sway session.
You created the file I suggested?
Yeah thats the very first line I entered what else you are seeing are the results of commands it told me to find out more about the issue
I need the full logfile.
That’s all it gave me
Here is my newest sway log if that was what you were after had to put it on my google drive it was too big to post here or zip and post.
possible solution?
The zipfile as previously stated, always the zip file....
its too large to attach, the log itself is 46.2mb zipped down to 1.83mb the max size ii can attach according to the forum is 1mb. I'll see if I can split it and put it up that way.
Reproduce on a clean boot and it won't be. Something is restarting and filling up the logs, that's why.
Ok I’ll do that and report back
here the latest after restart, launched into emulation station. The PC is still running when pulled.
Again, I need the zipfile containing all the logs.
sorry about that I misinterpreted your post sorry, here they are
