SNMPD

zorrua · December 13, 2016 at 1:11 PM

Hello,

It will be great to integrate snmpd to monitor our devices, thinks like mem, cpu, fs, temp...

It is possible to add to the system?

Regards.

**chewitt** · December 13, 2016 at 2:35 PM Official Post

It's a very niche requirement so will not be something added into core images, but it could be done/packaged as an add-on.

zorrua · December 13, 2016 at 2:47 PM

Quote from chewitt

It's a very niche requirement so will not be something added into core images, but it could be done/packaged as an add-on.

Ok,

I found this: OpenELEC Mediacenter - OpenELEC Forum - NET-SNMP addon (1/1)

Is it possible to add it to LE repo?

Best regards.

**chewitt** · December 14, 2016 at 1:14 PM Official Post

I've posted the link to our internal dev team channel for add-ons but I'm not sure you'll get willing volunteers there. Normally the people that might care about SNMP support on a Kodi media box are also the type to roll up their sleeves and use their Linux skills to update things for LE (as that git repo hasn't been touched for a couple of years and things probably need revising). If someone does the work and would like to sustain the add-on in the long-term it can be PR'd to our git repo.

zorrua · December 14, 2016 at 3:56 PM

Hello,

I have some Linux skills. If you point to the repo I could try to update the scripts.

Best regards.

zorrua · December 14, 2016 at 8:33 PM

Here is the source code: GitHub - jlim0930/NET-SNMP-addon-for-OpenELEC: NET-SNMP addon for OpenELEC

It must be update with recent sources and script.

Regards.

deurk · February 2, 2017 at 9:28 PM

I'd be happy to be able to poll my LibreElec box by SNMP as well to monitor load and usage. Would fit great in a LibreNMS tool for example.

zorrua · February 4, 2017 at 8:10 PM

Hello chewitt,

Is any update? Any dev is interested on it?

Best regards.

**chewitt** · February 5, 2017 at 2:42 AM Official Post

I reposted the request in team chat, but nobody leapt at the opportunity last time so better if you crack on with it yourselves.

**chewitt** · February 5, 2017 at 4:30 AM Official Post

Then again, might be a taker.. watch github for submissions

zorrua · February 6, 2017 at 3:43 PM

Quote from chewitt

Then again, might be a taker.. watch github for submissions

Thanks chewitt,

Is it possible to merge this?

GitHub - jlim0930/NET-SNMP-addon-for-OpenELEC: NET-SNMP addon for OpenELEC

Or how could I compile it and tey it myself?

Kind regards.

**chewitt** · February 6, 2017 at 4:14 PM Official Post

new addon net-snmp by lsellens · Pull Request #1282 · LibreELEC/LibreELEC.tv · GitHub

It needs some changes before being accepted, but as long as those get done it will be merged and built/pushed to the repo. I won't guess when that will be, but sometime soon-ish.

zorrua · February 7, 2017 at 7:46 AM

Thanks!

It will be great to monitor my little devices.

I use to leave them powered on 24h, so I need to monitor the temperature.

Kind regards.

zorrua · March 5, 2017 at 8:22 AM

Hello,

I installed the addon, but it doesn't start as a service:

Code

# snmpd.start 
/storage/.kodi/addons/service.net-snmp/bin/snmpd: error while loading shared libraries: libnetsnmpagent.so.30: cannot open shared object file: No such file or directory

Need I configure something?

Thanks and regards.

celedhrim · March 13, 2017 at 8:51 AM

Hello,

On wetek play 2 ( aarch64) this addon miss two .so file

libnetsnmpmibs.so and libnetsnmpagent.so

Log during compilation

Code

...
libtool:   error: error: relink 'libnetsnmpmibs.la' with the above command before installing it
...
libtool:   error: error: relink 'libnetsnmpagent.la' with the above command before installing it
...

**lsellens** · March 23, 2017 at 7:05 PM

Quote from zorrua
Hello,

I installed the addon, but it doesn't start as a service:
Code
# snmpd.start 
/storage/.kodi/addons/service.net-snmp/bin/snmpd: error while loading shared libraries: libnetsnmpagent.so.30: cannot open shared object file: No such file or directory
Need I configure something?

Thanks and regards.

I only tested that the service loaded on a generic x86_64 build. What build are you running and did you compile this yourself from source?
[hr]

Quote from celedhrim
Hello,

On wetek play 2 ( aarch64) this addon miss two .so file

libnetsnmpmibs.so and libnetsnmpagent.so

Log during compilation
Code
...
libtool:   error: error: relink 'libnetsnmpmibs.la' with the above command before installing it
...
libtool:   error: error: relink 'libnetsnmpagent.la' with the above command before installing it
...

Where did you get the addon you ran? Did you compile from source? I don't think they built one for the wetek but should probably compile and run but I never tested it.

mweinmann · March 26, 2017 at 4:57 PM

Hello all,

So I have net-snmp working, but have been trying to figure out how to get more information out of the system. The default config:

com2sec public default public
group localgroup v2c public
group localgroup v1 public
access localgroup "" any noauth exact all all none
view all included .1 80
syslocation HOME
syscontact root@openelec
dontLogTCPWrappersConnects yes

only provides the below when checked via SNMPWALK, which only really offers uptime. I'd like to poll memory, disk, cpu, traffic.

iso.3.6.1.2.1.1.1.0 = STRING: "Linux le-lr 4.9.8 #1 SMP Sat Feb 18 05:05:56 GMT 2017 x86_64"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.8072.3.2.10
iso.3.6.1.2.1.1.3.0 = Timeticks: (8647) 0:01:26.47
iso.3.6.1.2.1.1.4.0 = STRING: "root@openelec"
iso.3.6.1.2.1.1.5.0 = STRING: "le-lr"
iso.3.6.1.2.1.1.6.0 = STRING: "HOME"
iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.6.3.1
iso.3.6.1.2.1.1.9.1.2.2 = OID: iso.3.6.1.6.3.16.2.2.1
iso.3.6.1.2.1.1.9.1.2.3 = OID: iso.3.6.1.6.3.11.3.1.1
iso.3.6.1.2.1.1.9.1.2.4 = OID: iso.3.6.1.6.3.15.2.1.1
iso.3.6.1.2.1.1.9.1.2.5 = OID: iso.3.6.1.6.3.10.3.1.1
iso.3.6.1.2.1.1.9.1.3.1 = STRING: "The MIB module for SNMPv2 entities"
iso.3.6.1.2.1.1.9.1.3.2 = STRING: "View-based Access Control Model for SNMP."
iso.3.6.1.2.1.1.9.1.3.3 = STRING: "The MIB for Message Processing and Dispatching."
iso.3.6.1.2.1.1.9.1.3.4 = STRING: "The management information definitions for the SNMP User-based Security Model."
iso.3.6.1.2.1.1.9.1.3.5 = STRING: "The SNMP Management Architecture MIB."
iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.2 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.3 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.4 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.5 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.11.1.0 = Counter32: 186
iso.3.6.1.2.1.11.2.0 = Counter32: 186
iso.3.6.1.2.1.11.3.0 = Counter32: 0
iso.3.6.1.2.1.11.4.0 = Counter32: 0
iso.3.6.1.2.1.11.5.0 = Counter32: 0
iso.3.6.1.2.1.11.6.0 = Counter32: 0
iso.3.6.1.2.1.11.8.0 = Counter32: 0
iso.3.6.1.2.1.11.9.0 = Counter32: 0
iso.3.6.1.2.1.11.10.0 = Counter32: 0
iso.3.6.1.2.1.11.11.0 = Counter32: 0
iso.3.6.1.2.1.11.12.0 = Counter32: 0
iso.3.6.1.2.1.11.13.0 = Counter32: 196
iso.3.6.1.2.1.11.14.0 = Counter32: 0
iso.3.6.1.2.1.11.15.0 = Counter32: 4
iso.3.6.1.2.1.11.16.0 = Counter32: 196
iso.3.6.1.2.1.11.17.0 = Counter32: 0
iso.3.6.1.2.1.11.18.0 = Counter32: 0
iso.3.6.1.2.1.11.19.0 = Counter32: 0
iso.3.6.1.2.1.11.20.0 = Counter32: 0
iso.3.6.1.2.1.11.21.0 = Counter32: 0
iso.3.6.1.2.1.11.22.0 = Counter32: 0
iso.3.6.1.2.1.11.24.0 = Counter32: 0
iso.3.6.1.2.1.11.25.0 = Counter32: 0
iso.3.6.1.2.1.11.26.0 = Counter32: 0
iso.3.6.1.2.1.11.27.0 = Counter32: 0
iso.3.6.1.2.1.11.28.0 = Counter32: 210
iso.3.6.1.2.1.11.29.0 = Counter32: 0
iso.3.6.1.2.1.11.30.0 = INTEGER: 2
iso.3.6.1.2.1.11.31.0 = Counter32: 0
iso.3.6.1.2.1.11.32.0 = Counter32: 0

Does the configuration need a change or does something else need to happen?

**chewitt** · March 26, 2017 at 5:42 PM Official Post

Quote from mweinmann

syscontact root@openelec

lsellens (cough)