[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

quitroot Please reboot to LE from SD card and run installtointernal again.

The device tree is now amended so that you shouldn't have this issue if you run installtointernal in the future with Android still on internal partition.

kszaq

sorry to say but intall it twice using installtointernal command and same happened, libreelec works from nand (sdcard out) but remote control isn't working...

On the previous device (kii pro), everything worked properly.

quitroot This is remote.conf used by afl1 in his builds: remote.conf

I put the file in the folder

Configfiles

Turn on and off, and still no response

Still unchanged. When running through the memory card everything works fine. As soon as I try to install into the internal memory even double attempt, it leads me to a situation where the remote control is not responding.

I have problem, sometimes picture in dvb-s2 stuck, i think that i have found relevant log:

00:42:09.042 T:3559912352 NOTICE: CVideoPlayerAudio::Process - stream stalled timeout:384 initialTimeout:3000 startTime:64630025 MillisLeft:0

00:42:09.996 T:3534746528 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer

00:42:10.283 T:3526357920 NOTICE: VideoPlayer:Full caching video aq:22 vq:0

00:42:11.889 T:3559912352 ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer

00:42:16.893 T:3534746528 NOTICE: CAMLCodec::Decode: Stuck, try to get more buffer

more at kodi.log - Pastebin.com

Maybe it's just one NOK ECM, i don't know, but it should skip bad part and continue, not stuck.

I have KII Pro, 8.0-8.0.2b-I with service.tvheadend42-8.1.111b.zip (also tested with a), but i have this problem for longer time, i think it worked properly on older version like 8.0-8.0.1a-I-fix. This happens 1-2x per day.

afl1  kszaq

Maybe you have the files to restoring Android?

may work, after fresh install.

thanks in advance

news:

I found a link for android backup at cnx, I'll try and update.

Quote from BluPix

I have problem, sometimes picture in dvb-s2 stuck, i think that i have found relevant log:

I have exact same problem with LiveTV, but only when i use the hyperion (addon for ambient lighting). Also on a stream content it sometimes causes huge video slowing, but it releases itself by jumping to some buffered point of video (or i can force it by rewinding). Do you use hyperion?

No, i don't use hyperion.

Quote from BluPix

I have problem, sometimes picture in dvb-s2 stuck

I have the same problem. When
watching satellite TV receiving ECM from a remote server and the
temporary loss of Internet, the video stops and then is not
restored.

The same thing happens when I watch TorrentTV through AceStream.

But on LibreELEC-S905.arm-8.0-8.0.1a-I-fix, there is no such
problem and the video is restored immediately when the Internet appears.

Quote from quitroot

afl1  kszaq

Maybe you have the files to restoring Android?

may work, after fresh install.

thanks in advance

news:

I found a link for android backup at cnx, I'll try and update.

Display More

ki pro [s905d]

done fresh install:

1. back to androd.

2. boot librelec (8.0.2b & gxl_p230_k1_pro.dtb) from sdcard - working well.

2. install it to nand (by installtointernal command).

3. reboot from nand - remote controll isn't working.

please help me...

afl1  kszaq

So if everything works good from msd card why you want install in nand? 'Never change running system'

Quote from zbigzbig20

So if everything works good from msd card why you want install in nand? 'Never change running system'

1. NAND much faster.

2. more storage (16gb+32gb SD).

quitroot Please run sh -x /usr/lib/libreelec/remote-config | paste  and paste output.

Quote from kszaq

quitroot Please run sh -x /usr/lib/libreelec/remote-config | paste  and paste output.

LibreELEC:~ # sh -x /usr/lib/libreelec/remote-config | paste

+ SOURCEREMOTECONF=

+ TMPREMOTECONF=/tmp/remote.conf

+ REMOTECONFPRESENT=yes

+ REMAP=no

+ [ -f /storage/.config/remote.conf ]

+ [ -f /flash/remote.conf ]

+ SOURCEREMOTECONF=/flash/remote.conf

+ [ yes = yes ]

+ cp /flash/remote.conf /tmp/remote.conf

+ [ no = yes ]

+ /usr/bin/remotecfg /tmp/remote.conf

CjjS

LibreELEC:~ # reboot

same thing.

quitroot the command I gave you was for debugging. Now please try:

mount -o rw,remount /flash
rm /flash/remote*

Reboot and try.

Quote from kszaq

quitroot the command I gave you was for debugging. Now please try:

Code

mount -o rw,remount /flash
rm /flash/remote*

Reboot and try.

sorry, no change.