[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

  • Update in #1.
    I only compiled new version under parent kszaq's version as I have a bike camp in Croatia this week.


  • Update in #1.
    I only compiled new version under parent kszaq's version as I have a bike camp in Croatia this week.


    Thanks for your and Kszaq's job.
    Less buffering, smother channel switching.


    In video player mode rewind doesn't work.
    Wake up does'no t work. I realize without Network time Sever kII pro doesn't know the time, without actual time impossible to wake up.


    Have a good bike camp!

    Edited once, last by gor ().

  • K1 Plus Combo 8.0.1a -> 8.0.1c [DVB-S2]
    I'm not sure that I had any buffering issues with 8.0.1a version, at least I cannot remember any, but with the "1c" it's present. I had been using "1a" since release for 1-3 hours a day.


    today

    Code
    1. 19:14:21.781 T:3631215520 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer
    2. 19:14:23.929 T:4121042400  NOTICE: Display resolution ADJUST : 1920x1080 @ 50.00 - Full Screen (16) (weight: 0.000)
    3. 19:18:14.621 T:3631215520  NOTICE: Previous line repeats 1 times.
    4. 19:18:14.621 T:3631215520 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer


    Yesterday 7 times according to log. I remember few times.
    logs

    Edited once, last by Ftelf ().

  • After reading this topic I ordered a KII plus PRO in China, I'am bored with dull enigma2 and wan't a mediaplayer/system allinone


    Now awaiting delivery ( Can't wait) great job afl1 from what I read here :)

  • Does anyone else had any problems on dvb-c using latest updates?


    How can get more detailed debug information from Tvheadend? And not just "dvb-c scan no data, failed"


  • Does anyone else had any problems on dvb-c using latest updates?


    How can get more detailed debug information from Tvheadend? And not just "dvb-c scan no data, failed"


    In tvheadend debug window allow linuxdvb,mpegts and in log window push 'gear-box' to allow debug log.


  • It seems that r848 is trying to tune dvbs or i'm reading useless info?




    Hi, same issue that happened with R848 is present now with new board (r912 tuner), I saw that there wasn't r912 folder in /sys/modules, is it possible to port the same solution that was made for r848 for r912? System appears to be trying to use r848 driver


    logs:

  • Thanks for efforts, same issue with buffering here, from usb drive every one minute stop for buffering few seconds.

  • In tvheadend debug window allow linuxdvb,mpegts and in log window push 'gear-box' to allow debug log.



    That is what i get trying to scan on DVB-C Annex A, in Brazil.
    PS.: Worked perfectly until version 8.0-8.0.0f-I, inclusive. All version after that dont work.

  • With DVB-C annex B update by crazycat69 I updated dvb-c firmware. Try this special version with original dvb-c firmware.
    LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz


    Thanks alot! i'll try it now post the results later on.
    [hr]

    With DVB-C annex B update by crazycat69 I updated dvb-c firmware. Try this special version with original dvb-c firmware.
    LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz


    Seems like it didnt work. :-/ But, thanks anyway.

    Edited once, last by tiagovb ().


  • R912 is only new version of R848. Driver is same for both chips.What do you mean under weak signal? Is only signal strength gauge showing low value? In driver is erratically calculated signal strength (I am unable to fix it), only usable value is SNR.

  • Hi, could you add the Realtekwifidriver from gxbb_p200_1G_100M_RealtekWiFi.dtb to your firmware?
    I use 5ghz network because the 2.4ghz is full in our location.


  • Hi, could you add the Realtekwifidriver from gxbb_p200_1G_100M_RealtekWiFi.dtb to your firmware?
    I use 5ghz network because the 2.4ghz is full in our location.


    In KI Plus is Realtek RTL8189ETV. It only supports 2.4 GHz WiFi.