[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

**afl1** · April 5, 2017 at 6:01 AM

Update in #1.
I only compiled new version under parent kszaq's version as I have a bike camp in Croatia this week.

gor · April 6, 2017 at 7:01 AM

Quote from afl1

Update in #1.
I only compiled new version under parent kszaq's version as I have a bike camp in Croatia this week.

Thanks for your and Kszaq's job.
Less buffering, smother channel switching.

In video player mode rewind doesn't work.
Wake up does'no t work. I realize without Network time Sever kII pro doesn't know the time, without actual time impossible to wake up.

Have a good bike camp!

Ftelf · April 6, 2017 at 7:26 PM

K1 Plus Combo 8.0.1a -> 8.0.1c [DVB-S2]
I'm not sure that I had any buffering issues with 8.0.1a version, at least I cannot remember any, but with the "1c" it's present. I had been using "1a" since release for 1-3 hours a day.

today

Code

19:14:21.781 T:3631215520 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer
19:14:23.929 T:4121042400  NOTICE: Display resolution ADJUST : 1920x1080 @ 50.00 - Full Screen (16) (weight: 0.000)
19:18:14.621 T:3631215520  NOTICE: Previous line repeats 1 times.
19:18:14.621 T:3631215520 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer

Yesterday 7 times according to log. I remember few times.
logs

**afl1** · April 6, 2017 at 9:24 PM

Update in #1 with pvr.hts timeshift fix.

Guardian · April 7, 2017 at 12:23 PM

After reading this topic I ordered a KII plus PRO in China, I'am bored with dull enigma2 and wan't a mediaplayer/system allinone

Now awaiting delivery ( Can't wait) great job afl1 from what I read here

tiagovb · April 7, 2017 at 5:37 PM

Does anyone else had any problems on dvb-c using latest updates?

How can get more detailed debug information from Tvheadend? And not just "dvb-c scan no data, failed"

**afl1** · April 7, 2017 at 6:02 PM

Quote from tiagovb

Does anyone else had any problems on dvb-c using latest updates?

How can get more detailed debug information from Tvheadend? And not just "dvb-c scan no data, failed"

In tvheadend debug window allow linuxdvb,mpegts and in log window push 'gear-box' to allow debug log.

**afl1** · April 8, 2017 at 11:20 AM

Update in #1

pepesuriano · April 9, 2017 at 1:07 AM

Quote from pepesuriano

It seems that r848 is trying to tune dvbs or i'm reading useless info?

Quote from crazycat

need rebuild again
+ tuners/r848: DVB-C annex B support.

Hi, same issue that happened with R848 is present now with new board (r912 tuner), I saw that there wasn't r912 folder in /sys/modules, is it possible to port the same solution that was made for r848 for r912? System appears to be trying to use r848 driver

logs:

Code

[  290.090015@1] R848: r848_init:
[  293.083501@1] AVL: avl6862_read_status: Level=32
[  293.283482@1] AVL: avl6862_read_status: Level=32
[  293.483475@1] AVL: avl6862_read_status: Level=32
[  293.683107@1] AVL: avl6862_read_status: Level=32
[  293.883442@1] AVL: avl6862_read_status: Level=32
[  294.074872@2] AVL: avl6862_set_dvbmode: initing demod for delsys=1
[  294.075018@2] i2c i2c-1: Load avl6862 firmware patch for DVB-C size=47928
[  294.257298@1] AVL: avl6862_wait_demod_boot: status:1 ready_code:0x5aa57ff7
[  294.283264@1] AVL: avl6862_wait_demod_boot: status:0 ready_code:0x5aa57ff7
[  294.283603@1] i2c i2c-1: avl6862 patch ver 2.0 build 20559
[  294.385136@0] R848: r848_set_params: delivery_system=2 frequency=375000000 symbol_rate=5360000 bandwidth_hz=6000000
[  294.985213@1] R848: r848_set_params: R848_SetPllData for DVB-C Annex B
[  294.985307@1] R848: r848_set_params: R848_SetStandard=45
[  294.985357@1] R848: r848_set_params: R848_SetFrequency=375000 KHz
[  294.985597@1] R848: R848_GetLockStatus: R848_GETLOCKSTATUS=0x57
[  294.985642@1] R848: r848_set_params: Tuner Locked.
[  294.986004@1] AVL: avl6862_set_dvbc_b: Freq:375000000 Mhz,sym:5360000
[  295.013690@1] AVL: avl6862_read_status: Level=32
[  295.014395@1] AVL: avl6862_read_status: Level=32
[  295.015501@1] AVL: avl6862_read_status: Level=32
[  295.018363@1] AVL: avl6862_read_status: Level=32
[  295.065325@1] AVL: avl6862_read_status: Level=32
[  295.115384@1] AVL: avl6862_read_status: Level=32
[  295.165794@1] AVL: avl6862_read_status: Level=32

Display More

galgofa · April 9, 2017 at 12:16 PM

Thanks for efforts, same issue with buffering here, from usb drive every one minute stop for buffering few seconds.

tiagovb · April 9, 2017 at 3:00 PM

Quote from afl1

In tvheadend debug window allow linuxdvb,mpegts and in log window push 'gear-box' to allow debug log.

Code

Loglevel debug: enabled
2017-04-09 13:53:08.716 mpegts: DVB-C Network - adding mux 219MHz in DVB-C Network to scan queue weight 6 flags 4000
2017-04-09 13:53:08.717 mpegts: 219MHz in DVB-C Network - add raw service
2017-04-09 13:53:08.717 mpegts: 219MHz in DVB-C Network - tuning on Availink avl6862 #0 : DVB-C #0
2017-04-09 13:53:08.717 linuxdvb: Availink avl6862 #0 : DVB-C #0 - starting 219MHz in DVB-C Network
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - started
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID 1FFB (8187) [20/0xee401fd0]
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID 012B (299) [16/0xee403400]
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID 0039 (57) [16/0xee404880]
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID 0BBA (3002) [16/0xee405d98]
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID 0BBB (3003) [16/0xee4072d8]
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID 0012 (18) [20/0xee408828]
2017-04-09 13:53:08.718 mpegts: 219MHz in DVB-C Network - open PID tables subscription [0042/0xee400bb8]
2017-04-09 13:53:08.718 subscription: 0005: "scan" subscribing to mux "219MHz", weight: 6, adapter: "Availink avl6862 #0 : DVB-C #0", network: "DVB-C Network", service: "Raw PID Subscription"
2017-04-09 13:53:08.781 linuxdvb: Availink avl6862 #0 : DVB-C #0 - status   FAINT (SIGNAL)
2017-04-09 13:53:13.717 mpegts: 219MHz in DVB-C Network - scan no data, failed
2017-04-09 13:53:13.717 subscription: 0005: "scan" unsubscribing
2017-04-09 13:53:13.717 mpegts: 219MHz in DVB-C Network - close PID tables subscription [0042/0xee400bb8]
2017-04-09 13:53:13.717 mpegts: 219MHz in DVB-C Network - stopping mux
2017-04-09 13:53:13.718 linuxdvb: Availink avl6862 #0 : DVB-C #0 - stopping 219MHz in DVB-C Network
2017-04-09 13:53:13.718 mpegts: 219MHz in DVB-C Network - close PID 0012 (18) [20/0xee408828]
2017-04-09 13:53:13.718 mpegts: 219MHz in DVB-C Network - close PID 0039 (57) [16/0xee404880]
2017-04-09 13:53:13.718 mpegts: 219MHz in DVB-C Network - close PID 012B (299) [16/0xee403400]
2017-04-09 13:53:13.718 mpegts: 219MHz in DVB-C Network - close PID 0BBA (3002) [16/0xee405d98]
2017-04-09 13:53:13.718 mpegts: 219MHz in DVB-C Network - close PID 0BBB (3003) [16/0xee4072d8]
2017-04-09 13:53:13.718 mpegts: 219MHz in DVB-C Network - close PID 1FFB (8187) [20/0xee401fd0]
2017-04-09 13:53:13.718 mpegts: DVB-C Network - removing mux 219MHz in DVB-C Network from scan queue

Display More

That is what i get trying to scan on DVB-C Annex A, in Brazil.
PS.: Worked perfectly until version 8.0-8.0.0f-I, inclusive. All version after that dont work.

**afl1** · April 9, 2017 at 6:12 PM

Quote from tiagovb

That is what i get trying to scan on DVB-C Annex A, in Brazil.
PS.: Worked perfectly until version 8.0-8.0.0f-I, inclusive. All version after that dont work.

With DVB-C annex B update by crazycat69 I updated dvb-c firmware. Try this special version with original dvb-c firmware.
LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz

tiagovb · April 9, 2017 at 7:16 PM

Quote from afl1

With DVB-C annex B update by crazycat69 I updated dvb-c firmware. Try this special version with original dvb-c firmware.
LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz

Thanks alot! i'll try it now post the results later on.
[hr]

Quote from afl1

With DVB-C annex B update by crazycat69 I updated dvb-c firmware. Try this special version with original dvb-c firmware.
LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz

Seems like it didnt work. But, thanks anyway.

Code

Loglevel debug: enabled
2017-04-09 18:30:32.754 mpegts: DVB-C Network - adding mux 219MHz in DVB-C Network to scan queue weight 6 flags 4000
2017-04-09 18:30:32.755 mpegts: 219MHz in DVB-C Network - add raw service
2017-04-09 18:30:32.755 mpegts: 219MHz in DVB-C Network - tuning on Availink avl6862 #0 : DVB-C #0
2017-04-09 18:30:32.755 linuxdvb: Availink avl6862 #0 : DVB-C #0 - starting 219MHz in DVB-C Network
2017-04-09 18:30:32.755 mpegts: 219MHz in DVB-C Network - started
2017-04-09 18:30:32.755 mpegts: 219MHz in DVB-C Network - open PID 0012 (18) [20/0xee1029a8]
2017-04-09 18:30:32.756 mpegts: 219MHz in DVB-C Network - open PID 0BBA (3002) [16/0xee103e20]
2017-04-09 18:30:32.756 mpegts: 219MHz in DVB-C Network - open PID 0BBB (3003) [16/0xee1055b8]
2017-04-09 18:30:32.756 mpegts: 219MHz in DVB-C Network - open PID 0039 (57) [16/0xee1069e8]
2017-04-09 18:30:32.756 mpegts: 219MHz in DVB-C Network - open PID 012B (299) [16/0xee107e18]
2017-04-09 18:30:32.756 mpegts: 219MHz in DVB-C Network - open PID 1FFB (8187) [20/0xee10aa70]
2017-04-09 18:30:32.756 mpegts: 219MHz in DVB-C Network - open PID tables subscription [0042/0xee1017d0]
2017-04-09 18:30:32.756 subscription: 0005: "scan" subscribing to mux "219MHz", weight: 6, adapter: "Availink avl6862 #0 : DVB-C #0", network: "DVB-C Network", service: "Raw PID Subscription"
2017-04-09 18:30:32.821 linuxdvb: Availink avl6862 #0 : DVB-C #0 - status   FAINT (SIGNAL)
2017-04-09 18:30:37.755 mpegts: 219MHz in DVB-C Network - scan no data, failed
2017-04-09 18:30:37.755 subscription: 0005: "scan" unsubscribing
2017-04-09 18:30:37.755 mpegts: 219MHz in DVB-C Network - close PID tables subscription [0042/0xee1017d0]
2017-04-09 18:30:37.755 mpegts: 219MHz in DVB-C Network - stopping mux
2017-04-09 18:30:37.755 linuxdvb: Availink avl6862 #0 : DVB-C #0 - stopping 219MHz in DVB-C Network
2017-04-09 18:30:37.756 mpegts: 219MHz in DVB-C Network - close PID 0012 (18) [20/0xee1029a8]
2017-04-09 18:30:37.756 mpegts: 219MHz in DVB-C Network - close PID 0039 (57) [16/0xee1069e8]
2017-04-09 18:30:37.756 mpegts: 219MHz in DVB-C Network - close PID 012B (299) [16/0xee107e18]
2017-04-09 18:30:37.756 mpegts: 219MHz in DVB-C Network - close PID 0BBA (3002) [16/0xee103e20]
2017-04-09 18:30:37.756 mpegts: 219MHz in DVB-C Network - close PID 0BBB (3003) [16/0xee1055b8]
2017-04-09 18:30:37.756 mpegts: 219MHz in DVB-C Network - close PID 1FFB (8187) [20/0xee10aa70]
2017-04-09 18:30:37.756 mpegts: DVB-C Network - removing mux 219MHz in DVB-C Network from scan queue

Display More

taki · April 9, 2017 at 8:57 PM

I opened tuner part of KII pro and I found on tuner Rafael Micro R912.
I tryed LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz and LibreELEC-S905.arm-8.0-8.0.1e-I.img.gz.
very well scan and play DVB-C. I have only problems weak signal.

**afl1** · April 9, 2017 at 9:55 PM

Quote from taki

I opened tuner part of KII pro and I found on tuner Rafael Micro R912.
I tryed LibreELEC-S905.arm-8.0-8.0.1e-IX.img.gz and LibreELEC-S905.arm-8.0-8.0.1e-I.img.gz.
very well scan and play DVB-C. I have only problems weak signal.

R912 is only new version of R848. Driver is same for both chips.What do you mean under weak signal? Is only signal strength gauge showing low value? In driver is erratically calculated signal strength (I am unable to fix it), only usable value is SNR.

mondze · April 9, 2017 at 11:05 PM

Hi, could you add the Realtekwifidriver from gxbb_p200_1G_100M_RealtekWiFi.dtb to your firmware?
I use 5ghz network because the 2.4ghz is full in our location.

**afl1** · April 10, 2017 at 7:45 AM

Quote from mondze

Hi, could you add the Realtekwifidriver from gxbb_p200_1G_100M_RealtekWiFi.dtb to your firmware?
I use 5ghz network because the 2.4ghz is full in our location.

In KI Plus is Realtek RTL8189ETV. It only supports 2.4 GHz WiFi.

envagyok · April 10, 2017 at 7:54 AM

afl1

Kszaq totally repair fps changes with latest dev build:
LibreELEC-S905.arm-8.0-devel-20170409011740-r25791-g1fb98dc.tar

And he say make a little break with developing.
Can you make this version to K1plus too?

thank you :R

[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

Similar Threads

S802/S812-Libreelec images for 7/8/9