[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

Quote from afl1

LE 8.0.0d-I supports dvb-s, dvb-s2, dvb-t, dvb-t2 and dvb-c annex A.
Dvb-c annex B is experimental and in adapter is identified as ATSC-C.
[hr]

For PIDs explain use wikipedia. '' FAINT (SIGNAL)" in log means invalid status, demodulator wasn't locked. Probably you configured annex A and your network is annex B.
[hr]

It looks like you forgot set "Turn off LNB when idle". Only dvb-s with horizontal transponders had issue.

When creating muxes the combo box only shows “DVB_C" and “DVB_C Annex c" B is not an option un this version of tvheadend

Hi i would like Afl1 for the excellent work for this tv box .I have a small issue the addon27.db.Is any proper solution without rename the file.I have two same tv boxes one run the distro from a usb without any problem,and the other from sd cart which some time stack in krypton logo and must rename the file to move forward.

Quote from afl1

[hr]

It looks like you forgot set "Turn off LNB when idle". Only dvb-s with horizontal transponders had issue.

The problem at "Universal LNB only" was the networks empty and not dvb-s Network.
After that setting works excellent. Many thanks for your job.

Can I set in libreelec that shows only black/blank screen if I switch the channels?

Hi!
I have "kii pro" with LibreELEC-S905.arm-8.0.8.0.0f on SD card.
Trying to install additional pvr.hts-3.4.19.1, but each time the LibreELEC crashing.
Here is my crashlog file:
kodi_crashlog_20170315194450.log

K1-plus and DVB-T

Thx afl1, the version of LibreELEC-S905.arm-8.0-8.0.0f-I fast channel switching work great with service.tvheadend42-8.1.113 + pvr.hts-3.4.19.1

afl1, can I use this new tvheadend on play2 with le8 or it is build only for k1/k2 ?

I confirm that TVHeadend works fine with a USB. You need to use Raybuntu's 32-bit userspace build for WP2.

Quote from afl1

For annex B you have to create ATSC-C network and connect it to ATSC-C adapter.
[hr]

New tvheadend42 version: service.tvheadend42-8.1.113.zip
Adding standard sharing damaged some other features. In this version it is fixed.

Loglevel debug: enabled
2017-03-15 19:27:56.125 mpegts: myatsc - adding mux Multiplex [onid:FFFF tsid:FFFF] in myatsc to scan queue weight 5 flags 1000
2017-03-15 19:28:02.434 mpegts: myatsc - adding mux 507MHz in myatsc to scan queue weight 6 flags 4000
2017-03-15 19:28:02.436 mpegts: 507MHz in myatsc - add raw service
2017-03-15 19:28:02.437 mpegts: 507MHz in myatsc - tuning on Availink avl6862 : ATSC-C #0
2017-03-15 19:28:02.437 linuxdvb: Availink avl6862 : ATSC-C #0 - starting 507MHz in myatsc
2017-03-15 19:28:03.538 mpegts: 507MHz in myatsc - started
2017-03-15 19:28:03.538 epggrab: 507MHz in myatsc - registering mux for OTA EPG
2017-03-15 19:28:03.553 mpegts: 507MHz in myatsc - open PID 0012 (18) [20/0xabb38928]
2017-03-15 19:28:03.553 mpegts: 507MHz in myatsc - open PID 0BBA (3002) [16/0xabb39d58]
2017-03-15 19:28:03.553 mpegts: 507MHz in myatsc - open PID 0BBB (3003) [16/0xabb3b188]
2017-03-15 19:28:03.553 mpegts: 507MHz in myatsc - open PID 0039 (57) [16/0xabb3c5b8]
2017-03-15 19:28:03.553 mpegts: 507MHz in myatsc - open PID 012B (299) [16/0xabb3d9e8]
2017-03-15 19:28:03.554 mpegts: 507MHz in myatsc - open PID 1FFB (8187) [20/0xabb3ee18]
2017-03-15 19:28:03.554 mpegts: 507MHz in myatsc - open PID tables subscription [0042/0xabb5f9d0]
2017-03-15 19:28:03.554 subscription: 0001: "scan" subscribing to mux "507MHz", weight: 6, adapter: "Availink avl6862 : ATSC-C #0", network: "myatsc", service: "Raw PID Subscription"
2017-03-15 19:28:03.699 linuxdvb: Availink avl6862 : ATSC-C #0 - status   FAINT (SIGNAL)
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - scan no data, failed
2017-03-15 19:28:08.553 subscription: 0001: "scan" unsubscribing
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - close PID tables subscription [0042/0xabb5f9d0]
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - stopping mux
2017-03-15 19:28:08.553 linuxdvb: Availink avl6862 : ATSC-C #0 - stopping 507MHz in myatsc
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - close PID 0012 (18) [20/0xabb38928]
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - close PID 0039 (57) [16/0xabb3c5b8]
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - close PID 012B (299) [16/0xabb3d9e8]
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - close PID 0BBA (3002) [16/0xabb39d58]
2017-03-15 19:28:08.553 mpegts: 507MHz in myatsc - close PID 0BBB (3003) [16/0xabb3b188]
2017-03-15 19:28:08.554 mpegts: 507MHz in myatsc - close PID 1FFB (8187) [20/0xabb3ee18]
2017-03-15 19:28:08.554 mpegts: myatsc - removing mux 507MHz in myatsc from scan queue

kszaq, so I can use different dvb usb tuner ?
afl1, I installed your latest tvh42 on latest GDPR-1 Le8 build (WP2) but when I want to watch tv there is info no free adapters. When I back to TVH4.2 from his repository (tvh42.8.1.109.2) then everything works

I tested my build on Minix U1 with RTL2832 USB tuner and it worked. That's all I know.

Not switching from DVB-S to DVB-T and vice versa. Seems to work with first DVB chosen then on switching to other states "no free adaptor". Need to disable current DVB to get it to switch to other.

afl1 have you seen that scanning with atsc fails like dvbc?