[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

Quote from afl1

Have you ever got ethernet connection with version 8.0.0d?
Have you replaced in SDcard dbt.img?
Verify ethernet cable.
Finally try to install original Android to verify ethernet connection.

By the way my friend has KI Plus with damaged ethernet port. Ethernet was working but from unknown reason transceiver gone. Now he is using USB-Ethernet adapter.

Worked well in this version, I included dbt.IMG file. And the same cable working perfectly with my laptop. As I mentioned before can't install libreelic/android with sd card because it's stuck on amlogic s905 logo.

Sent from my Redmi Note 3 using Tapatalk

I mostly use K1plus as TV server.
Now I watched a movie with high bitrate 40MBit.
After 1.5hour the playing has every 2-3 sec a stutter.
Maybe overheating problem?
When idle, the team is 68 celsius degree.
How can I see over SSH the temperature when I play movie?

cat /sys/class/thermal/thermal_zone0/temp

That are really good news.

Quote from afl1

Another great news!
I fixed internal dvb tuner switching dvb-s/dvb-t/dvb-c in tvheadend.
Big thanks to Jaroslav Kysela from tvheadend team for help and fixies in tvheadend.
New version in #1, upgrade also tvheadend42 to 8.1.111.

Any news of annex B?

Quote from afl1

Another great news!
I fixed internal dvb tuner switching dvb-s/dvb-t/dvb-c in tvheadend.
Big thanks to Jaroslav Kysela from tvheadend team for help and fixies in tvheadend.
New version in #1, upgrade also tvheadend42 to 8.1.111.

Bad news: K1-plus + DVB-T
This version (LibreELEC-S905.arm-8.0-8.0.0e-I.img.gz) with recommended service.tvheadend42-8.1.111.zip + pvr.hts-3.4.19.1.zip + set In tvheadend limit 'Maximum PIDs' to 26 (DVB Inputs -> TV Adapters), but allways generated error message: Tvheadened HTSP Client: No Signal

Restarted the TV box many times and reverted TVHeadend back to service.tvheadend42-8.1.110d.zip, but the error message remain.

After reverted back to LibreELEC-S905.arm-8.0-8.0.0d-I.img the problem is fixed and the channels are right

Quote from afl1

DVB-C annex B is not supported. Annex B extension is only used in ATSC cable networks. In my driver is no ATSC support. I removed SYS_DVBC_ANNEX_B capabilities to avoid showing in tvheadend strange ATSC-C frontend.

Not supported in tvheadend? With tbs cards it works like a charm

I have same issues when developing driver for si2168 with crazycat it was exactly the same scenario, it should work. I remember that even at the first time it worked using atsc option

Quote from afl1

You can download sources and compile own version.

Which image has the driver included? I will test it.

LibreELEC-S905.arm-8.0-8.0.0e-I.tar this link no work

Quote from afl1

Have you updated tvheadend dbt-t setting for frontend?
Simple updating is not enough. New driver has 3 frontends, old only 1. In old driver dvb-s/dvb-t/dvb-c were connected to frontend0. In new driver dvb-s has frontend0, dvb-t frontend1 and dvb-c frontend2. After update dvb-t/dvb-c have no networks. It is necessary set them again.
Pls, try ones more again and let me know result.

Yes, I enabled the DVB-T tuner in Tvheadened frontend DVB Inputs -> TV Adapters (pick the Enabled checkbox and set the network to my predefined), because with the new configuration is automatically "deactivated" while the HTSP Client say: No free tuner available.
After enabled DVB-T in Tvheadend frontend (and set Network and 'Maximum PIDs' to 26) changed HTSP Client message from "No free tuner avaliable" to "No signal"

Unfortunately I could not find a solution

Hello! Help me please. How many I do not try to load LibreELEC 8.0, with different dtb.img for my KII-PRO - constantly ends with a message:
"cp: can’t stat ‘/flash/SYSTEM’ : No such file or directory
*** Error in prepare_sysroot: mount_common: Could not mount /dev/SYSTEM ***
### Starting debugging shell… type exit to quit ###
Sh: can’t access tty; job control turned off
#"
Each further download is possible only by the "toothpick method". What's wrong with me? With the version LibreELEC 7.0 for K2 there are no problems with downloading. (But there are other problems with scanning ..). Thank you.