As per our (and Kodi's) forum rules, "We are not fans of discussion on VPN services used to hide piracy or bypass geolocking".
Any VPN related stuff can mostly be found here: VPN Manager for OpenVPN
As per our (and Kodi's) forum rules, "We are not fans of discussion on VPN services used to hide piracy or bypass geolocking".
Any VPN related stuff can mostly be found here: VPN Manager for OpenVPN
I am not using OpenVPN.
What I am looking for is the documentation for this addon.
Have a look here 
and read some earlier posts as well. Not sure why Klojum relating own vpn to piracy but that not my interest....
This is my tinc.start file in /storage/.kodi/addons/http://service.system.tinc/bin
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)
. /etc/profile
oe_setup_addon service.system.tinc
DIR_LEGACY="$ADDON_HOME/vmnet_htpc"
if [ -d "$DIR_LEGACY" ]; then
echo "Warning: using legacy configuration $DIR_LEGACY, ignoring Kodi settings"
tincd --config "$DIR_LEGACY" --no-detach --net=vmnet_htpc
exit $?
fi
[ -z "$tinc_loglevel" ] && tinc_loglevel="1"
NET="vmnet_le"
NAME="${tinc_subnet//./_}"
CONF_KEYS="/storage/.cache/tinc.$NET"
CONF_TINC="/run/tinc/$NET"
DATA_LOCAL="$ADDON_HOME/Local"
DATA_REMOTES="$ADDON_HOME/Remotes"
rm -fr "$CONF_TINC" "$DATA_LOCAL" &> /dev/null
if [ ! -d "$CONF_KEYS" ]; then
rm -fr "$CONF_KEYS" &> /dev/null
mkdir -p "$CONF_KEYS"
tinc --batch --config "$CONF_KEYS" generate-ed25519-keys
fi
if [ ! -d "$DATA_REMOTES" ]; then
rm -fr "$DATA_REMOTES" &> /dev/null
mkdir -p "$DATA_REMOTES"
fi
if [ "$tinc_subnet" == "0.0.0.0" ]; then
echo "Warning: default subnet $tinc_subnet, aborting"
exit
fi
if [ -e "$DATA_REMOTES/$NAME" ]; then
echo "Error: $NAME in $DATA_REMOTES, aborting"
exit
fi
mkdir -p "$CONF_TINC"
cp -RT "$ADDON_DIR/config" "$CONF_TINC"
chmod +x "$CONF_TINC"/*-*
ln -sf "$DATA_REMOTES" "$CONF_TINC/hosts"
tee >> "$CONF_TINC/tinc.conf" << EOF
Ed25519PrivateKeyFile = $CONF_KEYS/ed25519_key.priv
LogLevel = $tinc_loglevel
Name = $NAME
EOF
mkdir -p "$DATA_LOCAL"
if [ -n "$tinc_address" ]; then
echo "Address = $tinc_address" >> "$DATA_LOCAL/$NAME"
fi
cat "$CONF_KEYS/ed25519_key.pub" >> "$DATA_LOCAL/$NAME"
tee -a "$CONF_TINC/tinc.conf" >> "$DATA_LOCAL/$NAME" << EOF
Port = $tinc_port
Subnet = $tinc_subnet
EOF
tincd --net "$NET" --no-detachAfter this you need to create vmnet_htpc folder in addon folder with normal tinc config and addon will start using this and not defaults
if [ -d "$DIR_LEGACY" ]; then
Ok, I was able to make it start correctly by putting my config in
/storage/.kodi/userdata/addon_data/http://service.system.tinc/.config/
But, it appears there's some issue with openssl:
# journalctl -f
-- Logs begin at Thu 2019-04-11 18:28:36 CEST. --
Nov 05 13:38:52 lampone sh[663]: Error while decrypting: error:060A7094:digital envelope routines:EVP_EncryptUpdate:invalid operation
Nov 05 13:38:52 lampone sh[663]: Error while decrypting metadata from natmachine (176.x.x.x port 25011)
Nov 05 13:39:26 lampone sh[663]: Error while decrypting: error:060A7094:digital envelope routines:EVP_EncryptUpdate:invalid operation
Nov 05 13:39:26 lampone sh[663]: Error while decrypting metadata from quake (94.x.x.x port 655)
Nov 05 13:39:37 lampone sh[663]: Error while decrypting: error:060A7094:digital envelope routines:EVP_EncryptUpdate:invalid operation
Nov 05 13:39:37 lampone sh[663]: Error while decrypting metadata from natmachine (176.x.x.x port 25011)
Nov 05 13:40:17 lampone sh[663]: Error while decrypting: error:060A7094:digital envelope routines:EVP_EncryptUpdate:invalid operation
Nov 05 13:40:17 lampone sh[663]: Error while decrypting metadata from quake (94.x.x.x port 655)
Nov 05 13:40:28 lampone sh[663]: Error while decrypting: error:060A7094:digital envelope routines:EVP_EncryptUpdate:invalid operation
Nov 05 13:40:28 lampone sh[663]: Error while decrypting metadata from natmachine (176.x.x.x port 25011)
^CHow do I downgrade the addon?
What version you use on other devices? I'm connecting to libreelec from android tinc which is 1.1pre17 and installed same version on Ubuntu on my work machine. Works no hassle since day one and is 4 times faster than openvpn..
What version you use on other devices?
1.0.36 and 1.0.35 (the two vps "hubs") -- and they work fine with both 1.0 and 1.1 clients, as I use tincapp.pacien.org on android.
As for openssl, I have
OpenSSL 1.1.1d 10 Sep 2019
on the mediacenter (it's a raspberry pi 3)
and
OpenSSL 1.1.1f 31 Mar 2020
on one node (Ubuntu 20.04) and
OpenSSL 1.1.1d 10 Sep 2019
on the second node (Debian 10)
Did you used any files from post I linked before? There is experimental protocol set to yes and I'm using ed25.... Keys only. Maybe there is a problem?
Did you used any files from post I linked before?
No, I reverse engineered tinc.start and put the config in there first with "tinc --config /path/to/thatplace init lampone" and then I added the two hosts.
Show me your tinc.config and list what files you got in lampone folder? 😉
Yeah you're right it's tinc.conf
Looks OK to me really. Should work 
Is your tinc-up script starting OK?
Can you see route to 10.9.0.0/32 network?
Can you see route to 10.9.0.0/32 network?
That part looks ok (10.9.0.1 is natmachine, 10.9.0.3 is quake)
peppe at lemure in ~
% ssh root@lampone
##############################################
# LibreELEC #
# https://libreelec.tv #
##############################################
LibreELEC (official): 9.2.4 (RPi2.arm)
lampone:~ # ip route get 10.9.0.1
10.9.0.1 dev tun0 src 10.9.0.5
lampone:~ # ping -c 10 10.9.0.1
PING 10.9.0.1 (10.9.0.1): 56 data bytes
--- 10.9.0.1 ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
lampone:~ # ping -c 10 10.9.0.3
PING 10.9.0.3 (10.9.0.3): 56 data bytes
--- 10.9.0.3 ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
lampone:~ # And attached is the network as I see it from lemure (my laptop, 10.9.0.2) -- gorilla is currently switched off
Let me know if you need help
awiouy any Ideas on what's going on here? Any experiments I can run to debug?
