Hi All,
I am going bananas here. In short, I'm experiencing an odd behaviour with my RPi4 (1Gb) flashed with LibreElec 9.2 and Ethernet dropouts (at least I think).
It's hard to explain really, never experienced something similar. So I installed LlibreElec and enabled SSH, all is good. SCP'ed my advancedsettings.xml (same one I use every else) which points to my rather big meta library. I rebooted expecting to see thumbnails, etc., but I see nothing in the library. Ok I thought, what's the deal?!? and then google pointed me to an option to allow LibreElec to wait until the network is up before starting Kodi, but I never had to do that. So I enabled and rebooted, and it brings up library but the RPi4 freezes almost immediately, then blank screen (as though it detected the Ethernet being down), then Kodi starts up again and freezes, continues to do this. Meanwhile the LEDs (orange/green) turn on and both go off, and it repeats this.
I tried Raspbian buster and LEDs seem normal and no Ethernet issues at all, as far as I could tell seems to only happen with LibreElec only. I also noticed Raspbian idling at around 40 degrees on my setup and LibreElec above 50.
I'm using a certified RPi4 power supply (5.1V 3.5A), attached is the crashlog.
Another thing I noticed that's truly bizarre is that I when I shutdown LibreElec, the Ethernet LEDs continue to blink it that same on/off pattern (both orange/green at the same time). WTF....
Please, any suggestions would be appreciative.
Thank you