Hauppauge Wintv NOVA-T-USB2 working in LE9.2?

taxexile · February 2, 2020 at 5:07 PM

I've got a Hauppauge Wintv NOVA-T-USB2 and wanted to try and get it up and running in TvHeadend (4.3)

I've enabled both the "DVB drivers for TBS" and "DVB drivers from the latest kernel" that are preinstalled in LE9.2, both enabled simultaneously now, but initially just the latest-kernal enabled.

Dmesg:

Display Spoiler

[ 0.000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.19.83 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Sat Nov 23 01:54:59 CET 2019

[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d

[ 0.000000] CPU: div instructions available: patching division code

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1

[ 0.000000] Memory policy: Data cache writealloc

[ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000

[ 0.000000] On node 0 totalpages: 950272

[ 0.000000] DMA zone: 1584 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 180224 pages, LIFO batch:63

[ 0.000000] HighMem zone: 770048 pages, LIFO batch:63

[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d4 with crng_init=0

[ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632

[ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 948688

[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:0D:70:9E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=0309-2816 disk=UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Memory: 3481992K/3801088K available (10240K kernel code, 753K rwdata, 2236K rodata, 6144K init, 557K bss, 56952K reserved, 262144K cma-reserved, 3080192K highmem)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

[ 0.000000] vmalloc : 0xec800000 - 0xff800000 ( 304 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)

[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB)

[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 754 kB)

[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 558 kB)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] ftrace: allocating 32504 entries in 96 pages

[ 0.000000] rcu: Hierarchical RCU implementation.

[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[ 0.000000] GIC: Using split EOI/Deactivate mode

[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).

[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns

[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns

[ 0.000018] Switching to timer-based delay loop, resolution 18ns

[ 0.000263] Console: colour dummy device 80x30

[ 0.000295] console [tty0] enabled

[ 0.000347] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)

[ 0.000376] pid_max: default: 32768 minimum: 301

[ 0.000569] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.001364] CPU: Testing write buffer coherency: ok

[ 0.001885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[ 0.002705] Setting up static identity map for 0x200000 - 0x20003c

[ 0.002905] rcu: Hierarchical SRCU implementation.

[ 0.005552] smp: Bringing up secondary CPUs ...

[ 0.006616] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[ 0.007819] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

[ 0.008975] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

[ 0.009144] smp: Brought up 1 node, 4 CPUs

[ 0.009161] SMP: Total of 4 processors activated (432.00 BogoMIPS).

[ 0.009175] CPU: All CPU(s) started in HYP mode.

[ 0.009187] CPU: Virtualization extensions available.

[ 0.009994] devtmpfs: initialized

[ 0.020973] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0

[ 0.021203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[ 0.021229] futex hash table entries: 1024 (order: 4, 65536 bytes)

[ 0.027969] pinctrl core: initialized pinctrl subsystem

[ 0.028981] NET: Registered protocol family 16

[ 0.032920] DMA: preallocated 1024 KiB pool for atomic coherent allocations

[ 0.033966] cpuidle: using governor ladder

[ 0.034014] cpuidle: using governor menu

[ 0.034503] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[ 0.034517] hw-breakpoint: maximum watchpoint size is 8 bytes.

[ 0.034746] Serial: AMBA PL011 UART driver

[ 0.039354] bcm2835-mbox fe00b880.mailbox: mailbox enabled

[ 0.082566] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1

[ 0.085921] vgaarb: loaded

[ 0.086288] SCSI subsystem initialized

[ 0.086492] usbcore: registered new interface driver usbfs

[ 0.086550] usbcore: registered new interface driver hub

[ 0.086641] usbcore: registered new device driver usb

[ 0.093713] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-05 20:38, variant start_x

[ 0.097719] raspberrypi-firmware soc:firmware: Firmware hash is 9b5b17690196152a1df1beb1429dd906556d5829

[ 0.100848] Advanced Linux Sound Architecture Driver Initialized.

[ 0.101885] clocksource: Switched to clocksource arch_sys_counter

[ 0.189783] FS-Cache: Loaded

[ 0.200138] NET: Registered protocol family 2

[ 0.200730] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

[ 0.200761] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[ 0.200823] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.200891] TCP: Hash tables configured (established 8192 bind 8192)

[ 0.201034] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.201067] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.201303] NET: Registered protocol family 1

[ 0.202043] RPC: Registered named UNIX socket transport module.

[ 0.202056] RPC: Registered udp transport module.

[ 0.202069] RPC: Registered tcp transport module.

[ 0.202081] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.202101] PCI: CLS 0 bytes, default 64

[ 0.227500] Initialise system trusted keyrings

[ 0.227728] workingset: timestamp_bits=14 max_order=20 bucket_order=6

[ 0.236885] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 0.237591] FS-Cache: Netfs 'nfs' registered for caching

[ 0.238233] NFS: Registering the id_resolver key type

[ 0.238263] Key type id_resolver registered

[ 0.238276] Key type id_legacy registered

[ 0.238298] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.238836] FS-Cache: Netfs 'cifs' registered for caching

[ 0.246122] Key type asymmetric registered

[ 0.246137] Asymmetric key parser 'x509' registered

[ 0.246330] bounce: pool size: 64 pages

[ 0.246380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[ 0.246396] io scheduler noop registered (default)

[ 0.246411] io scheduler deadline registered

[ 0.246569] io scheduler cfq registered

[ 0.246585] io scheduler mq-deadline registered

[ 0.246599] io scheduler kyber registered

[ 0.246747] io scheduler bfq registered

[ 0.280833] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000

[ 0.280859] brcm-pcie fd500000.pcie: could not get clock

[ 0.280953] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:

[ 0.281007] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000

[ 0.328604] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)

[ 0.328866] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00

[ 0.328885] pci_bus 0000:00: root bus resource [bus 00-01]

[ 0.328905] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])

[ 0.328963] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400

[ 0.329190] pci 0000:00:00.0: PME# supported from D0 D3hot

[ 0.332030] PCI: bus0: Fast back to back transfers disabled

[ 0.332053] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

[ 0.332275] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330

[ 0.332362] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]

[ 0.332612] pci 0000:01:00.0: PME# supported from D0 D3cold

[ 0.335328] PCI: bus1: Fast back to back transfers disabled

[ 0.335347] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01

[ 0.335411] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]

[ 0.335433] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]

[ 0.335475] pci 0000:00:00.0: PCI bridge to [bus 01]

[ 0.335499] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]

[ 0.335766] pcieport 0000:00:00.0: enabling device (0140 -> 0142)

[ 0.335995] pcieport 0000:00:00.0: Signaling PME with IRQ 53

[ 0.336191] pcieport 0000:00:00.0: AER enabled with IRQ 53

[ 0.336387] pci 0000:01:00.0: enabling device (0140 -> 0142)

[ 0.340971] iproc-rng200 fe104000.rng: hwrng registered

[ 0.341268] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

[ 0.341943] vc-sm: Videocore shared memory driver

[ 0.348670] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5f388)

[ 0.349269] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0

[ 0.349285] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[ 0.349297] [drm] No driver support for vblank timestamp query.

[ 0.349309] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL

[ 0.579307] Console: switching to colour frame buffer device 240x67

[ 0.612632] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device

[ 0.625164] brd: module loaded

[ 0.625349] loop: module loaded

[ 0.647551] usbcore: registered new interface driver rtsx_usb

[ 0.648722] Loading iSCSI transport class v2.0-870.

[ 0.649157] iscsi: registered transport (tcp)

[ 0.650865] libphy: Fixed MDIO Bus: probed

[ 0.650918] tun: Universal TUN/TAP device driver, 1.6

[ 0.651704] bcmgenet fd580000.genet: failed to get enet clock

[ 0.651724] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000

[ 0.651746] bcmgenet fd580000.genet: failed to get enet-wol clock

[ 0.651769] bcmgenet fd580000.genet: failed to get enet-eee clock

[ 0.651799] bcmgenet: Skipping UMAC reset

[ 0.652238] unimac-mdio unimac-mdio.-19: DMA mask not set

[ 0.665273] libphy: bcmgenet MII bus: probed

[ 0.692750] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)

[ 0.693748] usbcore: registered new interface driver lan78xx

[ 0.693797] usbcore: registered new interface driver dm9601

[ 0.693867] usbcore: registered new interface driver smsc95xx

[ 0.694160] xhci_hcd 0000:01:00.0: xHCI Host Controller

[ 0.694193] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1

[ 0.696845] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890

[ 0.697043] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54

[ 0.697788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[ 0.697805] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.697821] usb usb1: Product: xHCI Host Controller

[ 0.697835] usb usb1: Manufacturer: Linux 4.19.83 xhci-hcd

[ 0.697849] usb usb1: SerialNumber: 0000:01:00.0

[ 0.698439] hub 1-0:1.0: USB hub found

[ 0.698506] hub 1-0:1.0: 1 port detected

[ 0.699041] xhci_hcd 0000:01:00.0: xHCI Host Controller

[ 0.699066] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2

[ 0.699090] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed

[ 0.699537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[ 0.699554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.699569] usb usb2: Product: xHCI Host Controller

[ 0.699584] usb usb2: Manufacturer: Linux 4.19.83 xhci-hcd

[ 0.699598] usb usb2: SerialNumber: 0000:01:00.0

[ 0.700200] hub 2-0:1.0: USB hub found

[ 0.700266] hub 2-0:1.0: 4 ports detected

[ 0.701638] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[ 0.701969] dwc_otg: FIQ enabled

[ 0.701982] dwc_otg: NAK holdoff enabled

[ 0.701994] dwc_otg: FIQ split-transaction FSM enabled

[ 0.702010] Module dwc_common_port init

[ 0.702264] usbcore: registered new interface driver uas

[ 0.702367] usbcore: registered new interface driver usb-storage

[ 0.702573] mousedev: PS/2 mouse device common for all mice

[ 0.702962] i2c /dev entries driver

[ 0.705636] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

[ 0.705935] bcm2835-cpufreq: min=600000 max=1500000

[ 0.706823] sdhci: Secure Digital Host Controller Interface driver

[ 0.706835] sdhci: Copyright(c) Pierre Ossman

[ 0.707378] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe

[ 0.707926] sdhci-pltfm: SDHCI platform and OF driver helper

[ 0.711589] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.711655] hidraw: raw HID events driver (C) Jiri Kosina

[ 0.712879] usbcore: registered new interface driver usbhid

[ 0.712884] usbhid: USB HID core driver

[ 0.713313] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.714438] [vc_sm_connected_init]: start

[ 0.720754] [vc_sm_connected_init]: end - returning 0

[ 0.721495] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 0.721515] [vc_sm_connected_init]: start

[ 0.721961] [vc_sm_connected_init]: installed successfully

[ 0.723902] NET: Registered protocol family 10

[ 0.725188] Segment Routing with IPv6

[ 0.725315] NET: Registered protocol family 17

[ 0.725420] Key type dns_resolver registered

[ 0.725709] Registering SWP/SWPB emulation handler

[ 0.726318] Loading compiled-in X.509 certificates

[ 0.735369] uart-pl011 fe201000.serial: cts_event_workaround enabled

[ 0.735444] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2

[ 0.739227] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver

[ 0.739561] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver

[ 0.739963] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0

[ 0.739970] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated

[ 0.766248] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1

[ 0.783093] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[ 0.784769] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.786443] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.789570] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[ 0.791224] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.799441] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA

[ 0.808406] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1

[ 0.809771] console [netcon0] enabled

[ 0.809776] netconsole: network logging started

[ 0.809782] of_cfs_init

[ 0.809803] of_cfs_init: OK

[ 0.809968] ALSA device list:

[ 0.809974] No soundcards found.

[ 0.816914] Freeing unused kernel memory: 6144K

[ 0.817034] Run /init as init process

[ 0.832630] random: fast init done

[ 0.863715] mmc1: new high speed SDIO card at address 0001

[ 0.893642] Checking disk(s): UUID=0309-2816 UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8

[ 0.911132] mmc0: new ultra high speed DDR50 SDXC card at address aaaa

[ 0.911977] mmcblk0: mmc0:aaaa SC128 119 GiB

[ 0.914355] mmcblk0: p1 p2

[ 1.035236] usb 1-1: new high-speed USB device number 2 using xhci_hcd

[ 1.179748] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20

[ 1.179756] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 1.179763] usb 1-1: Product: USB2.0 Hub

[ 1.180865] hub 1-1:1.0: USB hub found

[ 1.181175] hub 1-1:1.0: 4 ports detected

[ 1.229569] fsck: CP437: Invalid argument

[ 1.229569] fsck: fsck.fat 3.0.28 (2015-05-16)

[ 1.229569] fsck: /dev/mmcblk0p1: 213 files, 18470/65501 clusters

[ 1.229569] fsck: STORAGE: clean, 38053/31086592 files, 23730321/124340224 blocks

[ 1.646000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[ 1.950860] systemd[1]: System time before build time, advancing clock.

[ 1.957342] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

[ 1.957657] systemd[1]: Detected architecture arm.

[ 1.960929] systemd[1]: Set hostname to <LibreELEC>.

[ 1.964402] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument

[ 2.067815] random: systemd: uninitialized urandom read (16 bytes read)

[ 2.068032] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 2.068175] random: systemd: uninitialized urandom read (16 bytes read)

[ 2.081427] systemd[1]: Listening on RPCbind Server Activation Socket.

[ 2.081504] random: systemd: uninitialized urandom read (16 bytes read)

[ 2.081539] systemd[1]: Reached target RPC Port Mapper.

[ 2.081773] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[ 2.084101] systemd[1]: Starting Show Version...

[ 2.084789] systemd[1]: Listening on Journal Socket (/dev/log).

[ 2.179968] kernel-overlays-setup: setup base modules

[ 2.230658] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.83

[ 2.262829] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware

[ 2.262958] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays

[ 2.265818] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf

[ 2.400428] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.83

[ 2.400566] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf

[ 2.470126] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/4.19.83

[ 2.470217] kernel-overlays-setup: running depmod

[ 2.518580] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd

[ 2.615830] usb 1-1.3: New USB device found, idVendor=2040, idProduct=9300, bcdDevice= 0.00

[ 2.615842] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2.615848] usb 1-1.3: Product: SOHO-FX2

[ 2.615854] usb 1-1.3: Manufacturer: Hauppau⁧攀

[ 2.615860] usb 1-1.3: SerialNumber: 9301-00-F008AF20

[ 4.418307] kernel-overlays-setup: done

[ 4.557494] systemd-journald[216]: Received request to flush runtime journal from PID 1

[ 5.001739] random: crng init done

[ 5.001747] random: 7 urandom warning(s) missed due to ratelimiting

[ 5.418260] mc: loading out-of-tree module taints kernel.

[ 5.418904] mc: Linux media interface: v0.10

[ 5.422904] videodev: Linux video capture interface: v2.00

[ 5.422914] WARNING: You are using an experimental version of the media stack.

[ 5.422914] As the driver is backported to an older kernel, it doesn't offer

[ 5.422914] enough quality for its usage in production.

[ 5.422914] Use it with care.

[ 5.422914] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org

[ 5.422914]

[ 5.426772] WARNING: You are using an experimental version of the media stack.

[ 5.426772] As the driver is backported to an older kernel, it doesn't offer

[ 5.426772] enough quality for its usage in production.

[ 5.426772] Use it with care.

[ 5.426772] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org

[ 5.426772]

[ 5.427860] WARNING: You are using an experimental version of the media stack.

[ 5.427860] As the driver is backported to an older kernel, it doesn't offer

[ 5.427860] enough quality for its usage in production.

[ 5.427860] Use it with care.

[ 5.427860] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org

[ 5.427860]

[ 5.430840] dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware

[ 5.454878] dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-02.fw'

[ 5.500168] usbcore: registered new interface driver dvb_usb_nova_t_usb2

[ 5.558685] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[ 5.559955] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

[ 5.560109] bcm2835_codec: Unknown symbol vb2_core_expbuf_dmabuf (err -2)

[ 5.561464] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff

[ 5.567630] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff

[ 5.568101] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff

[ 5.568456] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff

[ 5.585353] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.

[ 5.586923] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000

[ 5.593721] bcm2835_audio soc:audio: card created with 8 channels

[ 5.652340] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 5.708911] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 5.730514] brcmfmac: F1 signature read @0x18000000=0x15264345

[ 5.753414] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 5.753651] usbcore: registered new interface driver brcmfmac

[ 6.048056] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 6.056355] bcmgenet: Skipping UMAC reset

[ 6.073327] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04

[ 6.122405] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)

[ 6.122797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 6.307386] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 6.307399] brcmfmac: power management disabled

[ 6.364344] uart-pl011 fe201000.serial: no DMA platform data

[ 7.145338] bcmgenet fd580000.genet eth0: Link is Down

[ 10.185572] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[ 10.185624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 10.204624] 8021q: 802.1Q VLAN Support v1.8

[ 12.941235] Bluetooth: Core ver 2.22

[ 12.941291] NET: Registered protocol family 31

[ 12.941297] Bluetooth: HCI device and connection manager initialized

[ 12.941991] Bluetooth: HCI socket layer initialized

[ 12.942001] Bluetooth: L2CAP socket layer initialized

[ 12.942028] Bluetooth: SCO socket layer initialized

[ 12.946289] Bluetooth: HCI UART driver ver 2.3

[ 12.946298] Bluetooth: HCI UART protocol H4 registered

[ 12.946346] Bluetooth: HCI UART protocol Three-wire (H5) registered

[ 12.946486] Bluetooth: HCI UART protocol Broadcom registered

Lsusb:

Display Spoiler

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 2040:9300 Hauppauge WinTV NOVA-T USB2 (cold)
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Anyone see what I'm failing to see?

**CvH** · February 3, 2020 at 8:30 PM Official Post

pls use the "driver addon" and not activate the addons itself - currently you have 2 addons activated and this will not work properly

the dvb-latest addon should do it for that stick, if not just post an dmesg again (dmesg | paste)

taxexile · February 4, 2020 at 2:11 AM

That was very helpful and much appreciated. Was foolish of me to not recall that program-addon. Thank you.

I disabled both "DVB drivers for TBS" and "DVB drivers from the latest kernel" to create an initial-state.

I ran the LibreELEC-Module-Drivers program-addon, selected "DVB drivers from the latest kernel" and rebooted.

I'm presuming it would appear in my tvheadend tv-adaptors tab within dvb-input's configuration, or in the start-up wizard tune-and-network page but i only see greyed-out IPTV in there.

dmesg: http://ix.io/2aJV

lsusb: http://ix.io/2aJW

there is no /dev/dvb .

(I have tried the other 2x options of driver modules subsequently (LE-default and TBS) with no apparent tv-tuner recognised in tv-headend. my method of verifying correctness like this might be incorrect.

You help is very much appreciated

**CvH** · February 4, 2020 at 10:56 AM Official Post

it looks half fine at dmesg, not sure whats wrong

try to remove the stick and reboot

wait some seconds after reboot (10-20) and then plug the stick again to the system

wait ~10sec and post an dmesg | paste again

So we get it more clear what happens here, DVB-Latest or Standard should do it, likely.

taxexile · February 4, 2020 at 8:03 PM

Doing the above with the previously described set up (using dvb-latest)

Dmesg http://ix.io/2aMb

Lsusb: Bus 001 Device 003: ID 2040:9300 Hauppauge WinTV NOVA-T USB2 (cold)

Lsmod: http://ix.io/2aMc

No /dev/dvb

Nothing in TvHeadend (4.2 this time, LE version) Config -> Dvb Inputs -> Tv Adaptors

**CvH** · February 5, 2020 at 11:24 AM Official Post

looks very strange

usbcore: registered new interface driver dvb_usb_nova_t_usb2

afterwards it just stop

there should be some line

dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected

so I guess its not directly related to the dvb drivers (standard should be good enough)

Pls try disconnect, reboot, attach to different usb port (USB2/USB3) and have a look at the demesg if more output is generated

If you use some USB hub etc pls remove and directly attach it.

taxexile · February 5, 2020 at 2:09 PM

Detached device, that was connected directly via usb, rebooted, waited for kodi to launch, then directly connected to different untouched usb port and here is the dmesg after that: http://ix.io/2aP8

Set up remains the same as above; TvHeadend 4.2, dvb-latest chosen via LibreELEC-Module-Dirvers program-addon on LE9.2.0

Lsusb: Bus 001 Device 003: ID 2040:9300 Hauppauge WinTV NOVA-T USB2 (cold)

Lsmod: http://ix.io/2aP9

**CvH** · February 6, 2020 at 11:44 AM Official Post

It looks like its an RPi specific problem. Others have the same issue at Rpi too (not LE).

So I guess we need to play with the RPi options

try this USB tuner sticks not seen in TVheadend

taxexile · February 6, 2020 at 2:30 PM

I really appreciate your help. I might try another stick, maybe dual tuner with dvbt2, but that won't be for a while.

Incidentally, for anyone using this thread, I followed the thread in the previous post and changed cmdline.txt from

Code

boot=UUID=0309-2816 disk=UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8 quiet

to

Code

boot=UUID=0309-2816 disk=UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8 quiet dwc_otg.fiq_enable=0 dwc_otg.fiq_fsm_enable=0 dwc_otg.nak_holdoff=0

Still no tv-adapter shown in tvheadend, neither does /dev/dvb exist on this Pi4.

Dmesg: http://ix.io/2aUQ

Lsmod: http://ix.io/2aUR

**CvH** · February 6, 2020 at 6:44 PM Official Post

Hmm same situation

Could you test it at an other device ? Besides that I have really no idea, I ping the WinTV driver Maintainer, maybe he can have a look.

Wintv NOVA-T-USB2 (old one) not detected properly · Issue #93 · b-rad-NDi/Ubuntu-media-tree-kernel-builder · GitHub

taxexile · February 7, 2020 at 1:35 AM

It's a crappy old usb thing i had lying around so no big deal.

I really like the idea of ditching the dvb-s box and using the pi4 and some magnetic storage. Maybe recommend a decent dual-tunar dvd-t2 card.

I would use the official tv-hat but I have the ice-cooler which means the io is out of use.

You've been more helpful than you know.

**CvH** · February 8, 2020 at 9:49 AM Official Post

Digibit R1 is also a good choice if you search for some tuners

niels · May 7, 2020 at 9:21 PM

In case you are still interested, I got mine working right. The issue is the default firmware. You have to override it and put a correct version (I am ready to send you mine) into /storage/.config/firmware/ as explained here [Add a firmware to LibreELEC [LibreELEC.wiki]](Add a firmware to LibreELEC [LibreELEC.wiki]) . Then lsusb gives after restart

Hauppauge WinTV NOVA-T USB2 (warm)

and I confirm it does work properly with TvHeadend.

erbas · May 8, 2020 at 12:28 AM

niels a question did you build your Hauppauge WinTV NOVA-T USB2 firmware to the latest, using linux?

Then you replaced the same one in LibreELEC?

Thank you.

CvH If this is what it did and what path do I have to follow with the TBS5520SE?

In constructions: Index of / It does not have crazycat drivers.

niels · May 8, 2020 at 8:05 AM

erbas I am using a firmware that I know was working some years ago (at least five years, maybe ten years back). I forgot its origin. I can of course send it to you. Do you think it is better to use the latest version ?

erbas · May 8, 2020 at 1:04 PM

Quote from niels

erbas I am using a firmware that I know was working some years ago (at least five years, maybe ten years back). I forgot its origin. I can of course send it to you. Do you think it is better to use the latest version ?

thank you friend, for your generosity.

you gave a direction!

use TBS5520SE.

Thank you