Hauppauge Wintv NOVA-T-USB2 working in LE9.2?

[ 0.000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.19.83 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Sat Nov 23 01:54:59 CET 2019

[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d

[ 0.000000] CPU: div instructions available: patching division code

[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1

[ 0.000000] Memory policy: Data cache writealloc

[ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000

[ 0.000000] On node 0 totalpages: 950272

[ 0.000000] DMA zone: 1584 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 180224 pages, LIFO batch:63

[ 0.000000] HighMem zone: 770048 pages, LIFO batch:63

[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d4 with crng_init=0

[ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632

[ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 948688

[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:0D:70:9E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=0309-2816 disk=UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Memory: 3481992K/3801088K available (10240K kernel code, 753K rwdata, 2236K rodata, 6144K init, 557K bss, 56952K reserved, 262144K cma-reserved, 3080192K highmem)

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

[ 0.000000] vmalloc : 0xec800000 - 0xff800000 ( 304 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)

[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB)

[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 754 kB)

[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 558 kB)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] ftrace: allocating 32504 entries in 96 pages

[ 0.000000] rcu: Hierarchical RCU implementation.

[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[ 0.000000] GIC: Using split EOI/Deactivate mode

[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).

[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns

[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns

[ 0.000018] Switching to timer-based delay loop, resolution 18ns

[ 0.000263] Console: colour dummy device 80x30

[ 0.000295] console [tty0] enabled

[ 0.000347] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)

[ 0.000376] pid_max: default: 32768 minimum: 301

[ 0.000569] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.001364] CPU: Testing write buffer coherency: ok

[ 0.001885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[ 0.002705] Setting up static identity map for 0x200000 - 0x20003c

[ 0.002905] rcu: Hierarchical SRCU implementation.

[ 0.005552] smp: Bringing up secondary CPUs ...

[ 0.006616] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[ 0.007819] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

[ 0.008975] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

[ 0.009144] smp: Brought up 1 node, 4 CPUs

[ 0.009161] SMP: Total of 4 processors activated (432.00 BogoMIPS).

[ 0.009175] CPU: All CPU(s) started in HYP mode.

[ 0.009187] CPU: Virtualization extensions available.

[ 0.009994] devtmpfs: initialized

[ 0.020973] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0

[ 0.021203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[ 0.021229] futex hash table entries: 1024 (order: 4, 65536 bytes)

[ 0.027969] pinctrl core: initialized pinctrl subsystem

[ 0.028981] NET: Registered protocol family 16

[ 0.032920] DMA: preallocated 1024 KiB pool for atomic coherent allocations

[ 0.033966] cpuidle: using governor ladder

[ 0.034014] cpuidle: using governor menu

[ 0.034503] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[ 0.034517] hw-breakpoint: maximum watchpoint size is 8 bytes.

[ 0.034746] Serial: AMBA PL011 UART driver

[ 0.039354] bcm2835-mbox fe00b880.mailbox: mailbox enabled

[ 0.082566] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1

[ 0.085921] vgaarb: loaded

[ 0.086288] SCSI subsystem initialized

[ 0.086492] usbcore: registered new interface driver usbfs

[ 0.086550] usbcore: registered new interface driver hub

[ 0.086641] usbcore: registered new device driver usb

[ 0.093713] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-05 20:38, variant start_x

[ 0.097719] raspberrypi-firmware soc:firmware: Firmware hash is 9b5b17690196152a1df1beb1429dd906556d5829

[ 0.100848] Advanced Linux Sound Architecture Driver Initialized.

[ 0.101885] clocksource: Switched to clocksource arch_sys_counter

[ 0.189783] FS-Cache: Loaded

[ 0.200138] NET: Registered protocol family 2

[ 0.200730] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

[ 0.200761] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[ 0.200823] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.200891] TCP: Hash tables configured (established 8192 bind 8192)

[ 0.201034] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.201067] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.201303] NET: Registered protocol family 1

[ 0.202043] RPC: Registered named UNIX socket transport module.

[ 0.202056] RPC: Registered udp transport module.

[ 0.202069] RPC: Registered tcp transport module.

[ 0.202081] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.202101] PCI: CLS 0 bytes, default 64

[ 0.227500] Initialise system trusted keyrings

[ 0.227728] workingset: timestamp_bits=14 max_order=20 bucket_order=6

[ 0.236885] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 0.237591] FS-Cache: Netfs 'nfs' registered for caching

[ 0.238233] NFS: Registering the id_resolver key type

[ 0.238263] Key type id_resolver registered

[ 0.238276] Key type id_legacy registered

[ 0.238298] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.238836] FS-Cache: Netfs 'cifs' registered for caching

[ 0.246122] Key type asymmetric registered

[ 0.246137] Asymmetric key parser 'x509' registered

[ 0.246330] bounce: pool size: 64 pages

[ 0.246380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[ 0.246396] io scheduler noop registered (default)

[ 0.246411] io scheduler deadline registered

[ 0.246569] io scheduler cfq registered

[ 0.246585] io scheduler mq-deadline registered

[ 0.246599] io scheduler kyber registered

[ 0.246747] io scheduler bfq registered

[ 0.280833] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000

[ 0.280859] brcm-pcie fd500000.pcie: could not get clock

[ 0.280953] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:

[ 0.281007] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000

[ 0.328604] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)

[ 0.328866] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00

[ 0.328885] pci_bus 0000:00: root bus resource [bus 00-01]

[ 0.328905] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])

[ 0.328963] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400

[ 0.329190] pci 0000:00:00.0: PME# supported from D0 D3hot

[ 0.332030] PCI: bus0: Fast back to back transfers disabled

[ 0.332053] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

[ 0.332275] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330

[ 0.332362] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]

[ 0.332612] pci 0000:01:00.0: PME# supported from D0 D3cold

[ 0.335328] PCI: bus1: Fast back to back transfers disabled

[ 0.335347] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01

[ 0.335411] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]

[ 0.335433] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]

[ 0.335475] pci 0000:00:00.0: PCI bridge to [bus 01]

[ 0.335499] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]

[ 0.335766] pcieport 0000:00:00.0: enabling device (0140 -> 0142)

[ 0.335995] pcieport 0000:00:00.0: Signaling PME with IRQ 53

[ 0.336191] pcieport 0000:00:00.0: AER enabled with IRQ 53

[ 0.336387] pci 0000:01:00.0: enabling device (0140 -> 0142)

[ 0.340971] iproc-rng200 fe104000.rng: hwrng registered

[ 0.341268] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

[ 0.341943] vc-sm: Videocore shared memory driver

[ 0.348670] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5f388)

[ 0.349269] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0

[ 0.349285] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[ 0.349297] [drm] No driver support for vblank timestamp query.

[ 0.349309] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL

[ 0.579307] Console: switching to colour frame buffer device 240x67

[ 0.612632] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device

[ 0.625164] brd: module loaded

[ 0.625349] loop: module loaded

[ 0.647551] usbcore: registered new interface driver rtsx_usb

[ 0.648722] Loading iSCSI transport class v2.0-870.

[ 0.649157] iscsi: registered transport (tcp)

[ 0.650865] libphy: Fixed MDIO Bus: probed

[ 0.650918] tun: Universal TUN/TAP device driver, 1.6

[ 0.651704] bcmgenet fd580000.genet: failed to get enet clock

[ 0.651724] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000

[ 0.651746] bcmgenet fd580000.genet: failed to get enet-wol clock

[ 0.651769] bcmgenet fd580000.genet: failed to get enet-eee clock

[ 0.651799] bcmgenet: Skipping UMAC reset

[ 0.652238] unimac-mdio unimac-mdio.-19: DMA mask not set

[ 0.665273] libphy: bcmgenet MII bus: probed

[ 0.692750] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)

[ 0.693748] usbcore: registered new interface driver lan78xx

[ 0.693797] usbcore: registered new interface driver dm9601

[ 0.693867] usbcore: registered new interface driver smsc95xx

[ 0.694160] xhci_hcd 0000:01:00.0: xHCI Host Controller

[ 0.694193] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1

[ 0.696845] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890

[ 0.697043] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54

[ 0.697788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[ 0.697805] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.697821] usb usb1: Product: xHCI Host Controller

[ 0.697835] usb usb1: Manufacturer: Linux 4.19.83 xhci-hcd

[ 0.697849] usb usb1: SerialNumber: 0000:01:00.0

[ 0.698439] hub 1-0:1.0: USB hub found

[ 0.698506] hub 1-0:1.0: 1 port detected

[ 0.699041] xhci_hcd 0000:01:00.0: xHCI Host Controller

[ 0.699066] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2

[ 0.699090] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed

[ 0.699537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[ 0.699554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.699569] usb usb2: Product: xHCI Host Controller

[ 0.699584] usb usb2: Manufacturer: Linux 4.19.83 xhci-hcd

[ 0.699598] usb usb2: SerialNumber: 0000:01:00.0

[ 0.700200] hub 2-0:1.0: USB hub found

[ 0.700266] hub 2-0:1.0: 4 ports detected

[ 0.701638] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[ 0.701969] dwc_otg: FIQ enabled

[ 0.701982] dwc_otg: NAK holdoff enabled

[ 0.701994] dwc_otg: FIQ split-transaction FSM enabled

[ 0.702010] Module dwc_common_port init

[ 0.702264] usbcore: registered new interface driver uas

[ 0.702367] usbcore: registered new interface driver usb-storage

[ 0.702573] mousedev: PS/2 mouse device common for all mice

[ 0.702962] i2c /dev entries driver

[ 0.705636] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

[ 0.705935] bcm2835-cpufreq: min=600000 max=1500000

[ 0.706823] sdhci: Secure Digital Host Controller Interface driver

[ 0.706835] sdhci: Copyright(c) Pierre Ossman

[ 0.707378] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe

[ 0.707926] sdhci-pltfm: SDHCI platform and OF driver helper

[ 0.711589] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.711655] hidraw: raw HID events driver (C) Jiri Kosina

[ 0.712879] usbcore: registered new interface driver usbhid

[ 0.712884] usbhid: USB HID core driver

[ 0.713313] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[ 0.714438] [vc_sm_connected_init]: start

[ 0.720754] [vc_sm_connected_init]: end - returning 0

[ 0.721495] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 0.721515] [vc_sm_connected_init]: start

[ 0.721961] [vc_sm_connected_init]: installed successfully

[ 0.723902] NET: Registered protocol family 10

[ 0.725188] Segment Routing with IPv6

[ 0.725315] NET: Registered protocol family 17

[ 0.725420] Key type dns_resolver registered

[ 0.725709] Registering SWP/SWPB emulation handler

[ 0.726318] Loading compiled-in X.509 certificates

[ 0.735369] uart-pl011 fe201000.serial: cts_event_workaround enabled

[ 0.735444] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2

[ 0.739227] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver

[ 0.739561] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver

[ 0.739963] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0

[ 0.739970] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated

[ 0.766248] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1

[ 0.783093] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[ 0.784769] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.786443] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.789570] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[ 0.791224] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 0.799441] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA

[ 0.808406] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1

[ 0.809771] console [netcon0] enabled

[ 0.809776] netconsole: network logging started

[ 0.809782] of_cfs_init

[ 0.809803] of_cfs_init: OK

[ 0.809968] ALSA device list:

[ 0.809974] No soundcards found.

[ 0.816914] Freeing unused kernel memory: 6144K

[ 0.817034] Run /init as init process

[ 0.832630] random: fast init done

[ 0.863715] mmc1: new high speed SDIO card at address 0001

[ 0.893642] Checking disk(s): UUID=0309-2816 UUID=cde62edc-4372-409a-a45e-3ce8ca97d0d8

[ 0.911132] mmc0: new ultra high speed DDR50 SDXC card at address aaaa

[ 0.911977] mmcblk0: mmc0:aaaa SC128 119 GiB

[ 0.914355] mmcblk0: p1 p2

[ 1.035236] usb 1-1: new high-speed USB device number 2 using xhci_hcd

[ 1.179748] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20

[ 1.179756] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 1.179763] usb 1-1: Product: USB2.0 Hub

[ 1.180865] hub 1-1:1.0: USB hub found

[ 1.181175] hub 1-1:1.0: 4 ports detected

[ 1.229569] fsck: CP437: Invalid argument

[ 1.229569] fsck: fsck.fat 3.0.28 (2015-05-16)

[ 1.229569] fsck: /dev/mmcblk0p1: 213 files, 18470/65501 clusters

[ 1.229569] fsck: STORAGE: clean, 38053/31086592 files, 23730321/124340224 blocks

[ 1.646000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[ 1.950860] systemd[1]: System time before build time, advancing clock.

[ 1.957342] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

[ 1.957657] systemd[1]: Detected architecture arm.

[ 1.960929] systemd[1]: Set hostname to <LibreELEC>.

[ 1.964402] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument

[ 2.067815] random: systemd: uninitialized urandom read (16 bytes read)

[ 2.068032] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 2.068175] random: systemd: uninitialized urandom read (16 bytes read)

[ 2.081427] systemd[1]: Listening on RPCbind Server Activation Socket.

[ 2.081504] random: systemd: uninitialized urandom read (16 bytes read)

[ 2.081539] systemd[1]: Reached target RPC Port Mapper.

[ 2.081773] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[ 2.084101] systemd[1]: Starting Show Version...

[ 2.084789] systemd[1]: Listening on Journal Socket (/dev/log).

[ 2.179968] kernel-overlays-setup: setup base modules

[ 2.230658] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.83

[ 2.262829] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware

[ 2.262958] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays

[ 2.265818] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf

[ 2.400428] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.83

[ 2.400566] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf

[ 2.470126] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/4.19.83

[ 2.470217] kernel-overlays-setup: running depmod

[ 2.518580] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd

[ 2.615830] usb 1-1.3: New USB device found, idVendor=2040, idProduct=9300, bcdDevice= 0.00

[ 2.615842] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2.615848] usb 1-1.3: Product: SOHO-FX2

[ 2.615854] usb 1-1.3: Manufacturer: Hauppau⁧攀

[ 2.615860] usb 1-1.3: SerialNumber: 9301-00-F008AF20

[ 4.418307] kernel-overlays-setup: done

[ 4.557494] systemd-journald[216]: Received request to flush runtime journal from PID 1

[ 5.001739] random: crng init done

[ 5.001747] random: 7 urandom warning(s) missed due to ratelimiting

[ 5.418260] mc: loading out-of-tree module taints kernel.

[ 5.418904] mc: Linux media interface: v0.10

[ 5.422904] videodev: Linux video capture interface: v2.00

[ 5.422914] WARNING: You are using an experimental version of the media stack.

[ 5.422914] As the driver is backported to an older kernel, it doesn't offer

[ 5.422914] enough quality for its usage in production.

[ 5.422914] Use it with care.

[ 5.422914] Latest git patches (needed if you report a bug to [email protected]

[ 5.422914]

[ 5.426772] WARNING: You are using an experimental version of the media stack.

[ 5.426772] As the driver is backported to an older kernel, it doesn't offer

[ 5.426772] enough quality for its usage in production.

[ 5.426772] Use it with care.

[ 5.426772] Latest git patches (needed if you report a bug to [email protected]

[ 5.426772]

[ 5.427860] WARNING: You are using an experimental version of the media stack.

[ 5.427860] As the driver is backported to an older kernel, it doesn't offer

[ 5.427860] enough quality for its usage in production.

[ 5.427860] Use it with care.

[ 5.427860] Latest git patches (needed if you report a bug to [email protected]

[ 5.427860]

[ 5.430840] dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware

[ 5.454878] dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-02.fw'

[ 5.500168] usbcore: registered new interface driver dvb_usb_nova_t_usb2

[ 5.558685] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[ 5.559955] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

[ 5.560109] bcm2835_codec: Unknown symbol vb2_core_expbuf_dmabuf (err -2)

[ 5.561464] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff

[ 5.567630] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff

[ 5.568101] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff

[ 5.568456] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff

[ 5.585353] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.

[ 5.586923] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000

[ 5.593721] bcm2835_audio soc:audio: card created with 8 channels

[ 5.652340] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 5.708911] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 5.730514] brcmfmac: F1 signature read @0x18000000=0x15264345

[ 5.753414] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 5.753651] usbcore: registered new interface driver brcmfmac

[ 6.048056] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 6.056355] bcmgenet: Skipping UMAC reset

[ 6.073327] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04

[ 6.122405] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)

[ 6.122797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 6.307386] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 6.307399] brcmfmac: power management disabled

[ 6.364344] uart-pl011 fe201000.serial: no DMA platform data

[ 7.145338] bcmgenet fd580000.genet eth0: Link is Down

[ 10.185572] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[ 10.185624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 10.204624] 8021q: 802.1Q VLAN Support v1.8

[ 12.941235] Bluetooth: Core ver 2.22

[ 12.941291] NET: Registered protocol family 31

[ 12.941297] Bluetooth: HCI device and connection manager initialized

[ 12.941991] Bluetooth: HCI socket layer initialized

[ 12.942001] Bluetooth: L2CAP socket layer initialized

[ 12.942028] Bluetooth: SCO socket layer initialized

[ 12.946289] Bluetooth: HCI UART driver ver 2.3

[ 12.946298] Bluetooth: HCI UART protocol H4 registered

[ 12.946346] Bluetooth: HCI UART protocol Three-wire (H5) registered

[ 12.946486] Bluetooth: HCI UART protocol Broadcom registered

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 2040:9300 Hauppauge WinTV NOVA-T USB2 (cold)
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub