Unofficial LE for RK356x RK3328\RK3399 RK3588(s)

Quote from balbes150

What problems do you write about ? I have everything working in Armbian on T4, including WiFi And analog audio via 3.5.

hi @balbes150, the problem I encountered are:

1. wifi not working

2. HDMI does not work with HDMI-DVI converter with screen resolution lower than 1080p.

First of all, sorry for my poor English and thank you for your work.

I also own a NanoPiM4V2 and have tried the last few builds once. Most of the time, the RK3399 builds worked for me

But my real question is about Docker. I would like to use that, but I am not offered the Docker Service for the Installation at all, which is required for the Linuxserver Docker.

What can I do?

OK thank you for the info

Is there a period when this will be supported again?

Or in other words. Is there any way I can provide a Kodi 18 image that supports EMMC?

Docker support would be just as important to me as the EMMC thing

Quote from balbes150

Ver 20200826 kernel 5.8.4

Pay attention. Starting from version (20200826), the configuration order for the used DTB changes.

Please note that the algorithm for initial configuration of the system for startup has changed. Instead of a file "uEnv.txt", the file "/extlinux/extlinux.conf " is now used. The rules for editing a file remain the same.

I will try this as the last few builds haven't worked for me (blank screen no ssh)

I wonder if I'm doing something wrong though, do I still have to replace the U-boot (as per the instructions in the first post of this thread)?

EDIT: Answering my own question. DL'd the latest version (for M4) flashed it and nothing happened. Went through the Uboot routine and it's now working (albeit no sound and lots of add ons from the kodi repository report dependency failures, I managed to install 'films for action from the kodi repo, but all the videos stop a few seconds in).

The M4 images also caused problems for me and didn't start.

The RK3399 images from the same date started without having to change anything

Quote from mo123

Don't think 10-bit H264 work but kwiboo did write patches already for it, might need to wait for the next Linux kernel for it to be merged.

X265 is not working

Bluetooth, ethernet, wifi - It depends on your hardware, but works for supported devices

PWN Fan - No fan settings, only some devices' fan work and it's automatic

USB Ports work depending on device

Youtube using VP9 codec won't work, only H264 codec will work.

Skins work.

Display More

Does analog audio through the 3.5mm jack work? (RockPro64)

Is there a list somewhere where I can see which Addons, Services, etc. work at all with these builds, or where I can track the status of the customizations?

Quote from balbes150

ver 20200911 kernel 5.8.8

fix USB WiFi

for rk3288

ver 20200911 kernel 5.8.8 + Panfrost

Hi balbes150.

Please tell me,

How can I turn off at compilation such a parameter, which is designated as "Adjust display refresh rate" in the kodi?

The fact is that I tried to disable this parameter in the "appliance.xml" file. But in any case, the display frequency adjusted to match video (the screen goes blank for 2 seconds). For some reason, the LibreELEC team builds images "on start/stop" for rockchip, and for x86_64 this parameter is disabled by default. Where can it be disabled in the git (in which file, in which piece of code)?

Thank you.

I tried latest builds(20200901-20200918) on H96 MAX+ RK3328 with rk3328-box-h96mp.dtb. But kodi crash with :

2020-09-18 10:42:28.090 T:1197     INFO <general>: RetroPlayer[PROCESS]: Registering process control for GBM
    2020-09-18 10:42:28.090 T:1197     INFO <general>: RetroPlayer[RENDER]: Registering renderer factory for DMA
    2020-09-18 10:42:28.090 T:1197     INFO <general>: RetroPlayer[RENDER]: Registering renderer factory for OpenGLES
    2020-09-18 10:42:28.510 T:1197    ERROR <general>: CGBMUtils::CreateDevice - failed to create device
    2020-09-18 10:42:28.510 T:1197    FATAL <general>: CApplication::Create: Unable to init windowing system
    2020-09-18 10:42:28.510 T:1197     INFO <general>: Stopping player
    2020-09-18 10:42:28.510 T:1197     INFO <general>: Storing total System Uptime
    2020-09-18 10:42:28.511 T:1197     INFO <general>: Saving settings
    2020-09-18 10:42:28.562 T:1197     INFO <general>: Saving skin settings
    2020-09-18 10:42:28.562 T:1197     INFO <general>: Stopping all
    2020-09-18 10:42:28.576 T:1197     INFO <general>: stop dvd detect media
    2020-09-18 10:42:28.709 T:1197     INFO <general>: Application stopped<p></p>

Sep 18 10:42:28 LibreELEC kodi.sh[1197]: MESA-LOADER: failed to open kms_swrast (search paths /usr/lib/dri)
    Sep 18 10:42:28 LibreELEC kodi.sh[1197]: failed to load driver: kms_swrast
    Sep 18 10:42:28 LibreELEC kodi.sh[1197]: MESA-LOADER: failed to open swrast (search paths /usr/lib/dri)
    Sep 18 10:42:28 LibreELEC kodi.sh[1197]: failed to load swrast driver
    Sep 18 10:42:28 LibreELEC kodi.sh[1197]: ERROR: Unable to create GUI. Exiting
    Sep 18 10:42:29 LibreELEC kodi.sh[1193]: Segmentation fault (core dumped)
    Sep 18 10:42:40 LibreELEC kodi.sh[1193]: Crash report available at /storage/.kodi/temp/kodi_crashlog_20200918104229.log

Armbian with this dtb works good. How I may try fix it?

PS: You build from this (GitHub - 150balbes/LibreELEC.tv at master-arm) source?