[7.0.3.3d] LibreELEC 7.0 for S805

    first off many thanks for the help my friends. i had been testing my box running on 512 meg. when i stream hd it seems like audio is out of sync sometimes. if i browse through the menu while streaming the box would freeze. i also got remote to work i did have to delete text from remote.conf.text thanks for the tip but the volume button up doesnt work. u guys been a lots of help i really thank yall for that. im a straight noob but whats more worse is that im a visual learner lots of letters makes my head hurt. lol

    Quote from GlennTidbury


    How do you get twrp on the box and how do you copy the files with it? I thought twrp was an android recovery?

    Run it from SD card. Rename twrp recovery to recovery.img, place it in the root of your SD card and boot to recovery
    There are many builds of TWRP, make sure you get one confirmed working correctly with your device.

    Edited once, last by Poida (July 30, 2016 at 1:58 AM).

    Quote from GlennTidbury


    Also I still don't understand why I need twrp? How do I copy the .sh and .start files using twrp?

    You don't need TWRP for that. If you have any problems using SSH, you can use TWRP for that (it has a file manager and SMB share and also SSH, I believe)

    Edited once, last by Poida (July 30, 2016 at 9:52 AM).

    Quote from Poida

    Use the HD18Q or MXQ build (whichever one gets your WiFi working) and then drop the remote.conf from the m201d build into /storage/.config via SSH or, alternatively, the configfiles samba share

    unfortunately none of the builds have a working wifi for me. Could this board now have a different wifi chip?

    Quote from Mark


    Thanks for this, works great on my all black mxq (HD180 build) no isses exept, power light and I can't run retroarch.

    Is there an alternitive guide for your retroarch build?

    This link is down

    Retroarch addon for Openelec on MK808B+ and MXQ - FreakTab.com

    Thanks again.

    any logs? That would help with the Retroarch plugin...I have the latest 1.3.6 Retroarch running great on the latest Libreelec...It must be a hardware issue?

    Edited once, last by sammaz (August 3, 2016 at 3:20 AM).

    Quote from galaxysalvo


    Hi guys, someone was able to get work hyperion?


    It has something to do with amlogic's amcodec and hyperion doesnt work with it, if you try the hyperion forum there is a guide on how to forward the captured display on amlogic devices. But I have yet to get it to work.

    Sent from my SM-G928W8 using Tapatalk

    Quote from pigbait


    It has something to do with amlogic's amcodec and hyperion doesnt work with it, if you try the hyperion forum there is a guide on how to forward the captured display on amlogic devices. But I have yet to get it to work.

    Sent from my SM-G928W8 using Tapatalk

    Oh thank you, anyway my hardware is S905, I wronged thread. But I think it's the same problem

    Hi,

    Have a memory ram size question/issue...

    Its a Leelbox MXQ that the only version of LibreELEC that seems to work and running from NAND is LibreELEC-S805.m201d.arm-7.0.2.4...

    Tried all the other 3 versions and they will just brick it and it gets a struck on MXQ screen at boot up...

    System Runs fine with the LibreELEC-S805.m201d.arm-7.0.2.4 other then its not reporting the 1gb memory, only 512k memory...
    ----------------------------------------------------------------------------------
    LibreELEC:~ # free -m

    total used free shared buffers cached
    Mem: 343 279 64 0 27 82
    -/+ buffers/cache: 170 173
    Swap: 255 0 255
    ----------------------------------------------------------------------------------

    Did note that this LibreELEC version was for some 512k models... would there be somewhere a setting that can be changed to use the full 1gb of memory...

    Edit: Just read on a earlier post that they are Faking out the 1gb memory and is only using 512k memory even that the memory chips say 512k... Oh well... still more memory then the Apple iTV rev1....

    Thanks in Advance...

    Model: Leelbox(red stripe) MXQ
    NAND: LibreELEC-S805.m201d.arm-7.0.2.4
    Board Version: MXQ_S805 V3_1 20151230
    Android Version that works (now overritten): cyx_MXQ_8189etv_8g1g_160419_USB.img

    Edited once, last by tvtester (August 4, 2016 at 5:34 PM).

    Last batch of mxq I had was 512. The bad thing about when streaming sound would be out of sync then later it would just freeze up. It was very annoying.

    Quote from sammaz

    any logs? That would help with the Retroarch plugin...I have the latest 1.3.6 Retroarch running great on the latest Libreelec...It must be a hardware issue?

    Thanks for replying, I got it to work via shh, only issue is I can start it from kodi, freaktab.com is back up for me now, I will read the posts and will post there if I don't find a solution, thanks again.

    @ kszaq
    Thanks for Stable Work on my box s805 !
    1- i try DVBSky S960 & Working for your build . but i have more freaz Pictures for channel HD . i dont know what problem ?

    2- so i want try other USB : TechniSat SkyStar USB 2 . but need something for driver to work .
    lsusb :
    Bus 001 Device 003: ID 13d0:2282 Techsan Electronics Co., Ltd. TechniSat DVB-PC TV Star 2
    Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub

    dmesg | pastebinit : jgMd

    can help me for Driver this Card ?
    More info : TechniSat SkyStar USB / Sky2PC USB - LinuxTVWiki
    or : SKYSTAR-2.com SkyStar ProgDVB Satellite Receiver Dish Network HD TV
    or : drivers - TechniSat SkyStar USB 2 - Ask Ubuntu

    waiting ...

    Edited once, last by asmar (August 8, 2016 at 4:45 AM).

    @asmar2 I have no knowledge how DVB drivers work, I just include them. Your log is not collected correctly - you should have rebooted before collecting it - but from what I can see you should try connecting the tuner over a powered USB hub first. Here's the error you are having:

    Code
    dvb_usb_v2: usb_bulk_msg() failed=-110


    and a solution from someone with similar issue on other platform: OpenELEC Mediacenter - OpenELEC Forum - Error dvb_usb_v2: 2nd usb_bulk_msg() failed=-110 (1/1)

    try it via hub usb but not help me ...

    =========
    LibreELEC:~ # lsusb
    Bus 001 Device 004: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
    Bus 001 Device 005: ID 13d0:2282 Techsan Electronics Co., Ltd. TechniSat DVB-PC TV Star 2
    Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
    Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    LibreELEC:~ # dmesg | grep usb
    [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=1 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,1080i,full hdmimode=1080i cvbsmode=576cvbs androidboot.firstboot=0 hdmitx=cecf bootfromsd console=tty0 consoleblank=0 usbcore.autosuspend=-1 systemd.show_status=auto
    [ 0.808692@0] usbcore: registered new interface driver usbfs
    [ 0.813825@0] usbcore: registered new interface driver hub
    [ 0.819264@0] usbcore: registered new device driver usb
    [ 1.467041@0] usbcore: registered new interface driver smsc95xx
    [ 1.472980@0] usbcore: registered new interface driver qf9700
    [ 1.478626@0] usbcore: registered new interface driver sr9600
    [ 1.484698@0] usbcore: registered new interface driver usb-storage
    [ 1.509415@0] usbcore: registered new interface driver usbhid
    [ 1.510915@0] usbhid: USB HID core driver
    [ 1.734021@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
    [ 1.828778@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.835642@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.843013@0] usb usb1: Product: DWC OTG Controller
    [ 1.847802@0] usb usb1: Manufacturer: Linux 3.10.99 dwc_otg_hcd
    [ 1.853728@0] usb usb1: SerialNumber: lm1
    [ 1.866016@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
    [ 1.992636@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.999443@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 2.006868@0] usb usb2: Product: DWC OTG Controller
    [ 2.011650@0] usb usb2: Manufacturer: Linux 3.10.99 dwc_otg_hcd
    [ 2.017581@0] usb usb2: SerialNumber: lm0
    [ 2.072156@3] set usb port power on (board gpio 5)!
    [ 2.482126@2] usb 1-1: new high-speed USB device number 2 using dwc_otg
    [ 2.683478@3] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
    [ 2.684745@3] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    [ 2.692014@3] usb 1-1: Product: USB2.0 Hub
    [ 2.992440@3] usb 1-1.2: new high-speed USB device number 3 using dwc_otg
    [ 3.092807@3] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
    [ 3.094252@3] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
    [ 3.101694@3] usb 1-1.2: Product: USB 2.0 Hub
    [ 3.392246@3] usb 1-1.2.4: new high-speed USB device number 4 using dwc_otg
    [ 3.493748@3] usb 1-1.2.4: New USB device found, idVendor=058f, idProduct=6366
    [ 3.495375@3] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 3.503009@3] usb 1-1.2.4: Product: Flash Card Reader/Writer
    [ 3.508617@3] usb 1-1.2.4: Manufacturer: Generic
    [ 3.513220@3] usb 1-1.2.4: SerialNumber: 058F63666438
    [ 3.519196@3] usb-storage 1-1.2.4:1.0: USB Mass Storage device detected
    [ 3.525042@3] scsi0 : usb-storage 1-1.2.4:1.0
    [ 46.572291@2] usb 1-1.2.1: new high-speed USB device number 5 using dwc_otg
    [ 46.672917@3] usb 1-1.2.1: New USB device found, idVendor=13d0, idProduct=2282
    [ 46.672953@3] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    ===============

    can you Compile model ( stv0299.ko or mt312.ko + b2c2-flexcop.ko + b2c2-flexcop-usb.ko ) for kernel 3.10.99
    it not included in your build ...