[7.0.3.3d] LibreELEC 7.0 for S805

Quote from kszaq

Can you try running this in SSH terminal:

Code

echo audio_off > /sys/class/amhdmitx/amhdmitx0/config
echo audio_on > /sys/class/amhdmitx/amhdmitx0/config

Don't worry about sh: write error: Bad address that comes out when executing. Does audio turn on after this?

No audio still.

But also i noticed if i turn the device on with the tv off and turn the tv on once its booted it works fine and the tv has detected it.

Quote from AuXBoX

No audio still.

But also i noticed if i turn the device on with the tv off and turn the tv on once its booted it works fine and the tv has detected it.

I know this sounds stupid, but have you tried a different HDMI cable. I've had some problems with the ones supplied with the boxes.

Sent from my SM-G928W8 using Tapatalk

pigbait i have tried three different ones with no luck.

Quote from AuXBoX

pigbait i have tried three different ones with no luck.

Have you tried turning CEC off on your TV ?

Quote from kostaman

Have you tried turning CEC off on your TV ?

Yeah i have and on Kodi.
I'm thinking of putting android back on and changing the CEC settings on that then flashing LibreElec back to NAND.
Would that effect LibreElec at all? Cause i know it effects the resolution on bootup from when i was playing around with previous problems.

thanks for the assistance also guys

Quote from AuXBoX

Yeah i have and on Kodi.
I'm thinking of putting android back on and changing the CEC settings on that then flashing LibreElec back to NAND.
Would that effect LibreElec at all? Cause i know it effects the resolution on bootup from when i was playing around with previous problems.

thanks for the assistance also guys

I'm not sure if you have more than 1 HDMI port into the TV ?
I guess you have tried a different one if you had one ?
Sorry if i am asking the obvious.

kostaman
Yeah i have tried another port and still the same.

Quote from AuXBoX

kostaman
Yeah i have tried another port and still the same.

What setting do you have in Settings\System\Audio Output\Audio Output Device ?

sammaz
I'm not home at moment but from memory:
SPDIF was the only one that worked if i unplugged the hdmi cable and plugged it back in AND if i left tv off till LibreElec booted and i turned the Tv on.
ANALOG worked if i unplugged the HDMI cable and plugged back in only.

I'm pretty sure thats what happens

Quote from AuXBoX

sammaz
I'm not home at moment but from memory:
SPDIF was the only one that worked if i unplugged the hdmi cable and plugged it back in AND if i left tv off till LibreElec booted and i turned the Tv on.
ANALOG worked if i unplugged the HDMI cable and plugged back in only.

I'm pretty sure thats what happens

Are you on 60hz or 24hz.. with my box I get no audio if i set it to 24hz in the display setting.

Sent from my SM-G928W8 using Tapatalk

Quote from pigbait

Are you on 60hz or 24hz.. with my box I get no audio if i set it to 24hz in the display setting.

Sent from my SM-G928W8 using Tapatalk

60 but i have tried 50 and both the same

Quote from kszaq

AuXBoX: If you want to disable CEC at powering on, you can execute fw_setenv cecconfig cec0. This will have the same effect as disabling CEC in Android.

That didn't work either.

I'ts something during the bootup process. At the very start

Quote from kszaq

@bragbuzz Download recovery.img from here and place it on your SD card along with other files from NAND ZIP.

No. It start with superceleron boot image and then "no signall"

Is there anyway of logging the the boot process to see whats happening?

Wow. It works! thanks