Update for Tvheadend.
service.tvheadend42-7.0.107.zipRelease notes:
- optimize for K1 Plus and K2 Pro;
- fix for TIMEOUT during mux scanning;
- UHD muxes have issue with NIT (only Fashion 4k on Astrta 19.2E is correctly scanned);
- dvb-t has bug in driver, impossible to fix in tvheadend;
- latest sources for tvheadend, h264 and hevc codecs;
Thanks.
Will there be a krypton build with this internal tuner support? No rush or anything though, just curious. 
For my use of tvheadend, when watching on K2 pro SD channels often get stuttering. But when watching from other client with Kodi Krypton, that issue never occur.
So I think this is due to Kodi Jarvis somehow.
Thanks for your work afl1.
Unfortunately, we still are problems
linuxdvb: Availink AVL6862: DVB-S # 0 - failed to config dmx for pid 474 [e = Operation not permitted]
full log tvh:
GY35in7G
Thanks for your work afl1.
Unfortunately, we still are problems
linuxdvb: Availink AVL6862: DVB-S # 0 - failed to config dmx for pid 474 [e = Operation not permitted]full log tvh:
GY35in7G
I don't see any problems. Log for transponder 11526H 13E shows the scan was successfully completed.
2016-11-04 22:44:33.216 mpegts: 11526H in 13E - tuning on Availink AVL6862 : DVB-S #0
2016-11-04 22:44:33.219 tbl-eit: 11526H in 13E: registering mux eit
2016-11-04 22:44:33.222 subscription: 0042: "scan" subscribing to mux "11526H", weight: 5, adapter: "Availink AVL6862 : DVB-S #0", network: "13E", service: "Raw PID Subscription"
2016-11-04 22:44:43.315 mpegts: 11526H in 13E - scan no data, failed
2016-11-04 22:44:43.315 subscription: 0042: "scan" unsubscribing
2016-11-04 22:44:43.315 mpegts: 11526H in 13E - tuning on Availink AVL6862 : DVB-S #0
2016-11-04 22:44:43.317 tbl-eit: 11526H in 13E: registering mux eit
2016-11-04 22:44:43.318 subscription: 0045: "scan" subscribing to mux "11526H", weight: 5, adapter: "Availink AVL6862 : DVB-S #0", network: "13E", service: "Raw PID Subscription"
2016-11-04 22:44:48.656 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 474 [e=Operation not permitted]
2016-11-04 22:44:48.656 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 475 [e=Operation not permitted]
2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 476 [e=Operation not permitted]
2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 477 [e=Operation not permitted]
2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 521 [e=Operation not permitted]
2016-11-04 22:44:53.315 mpegts: 11526H in 13E scan complete
2016-11-04 22:44:53.315 subscription: 0045: "scan" unsubscribing
20
"failed to config dmx..." means this kind of service is unsupported by this receiver. I tested this transponder in my box with 30 scanned services (lot of radios) and status OK. I can watch SRF info HD, SRF 1 HD and SRF 2 HD.
I don't see any problems. Log for transponder 11526H 13E shows the scan was successfully completed.
Code2016-11-04 22:44:33.216 mpegts: 11526H in 13E - tuning on Availink AVL6862 : DVB-S #0 2016-11-04 22:44:33.219 tbl-eit: 11526H in 13E: registering mux eit 2016-11-04 22:44:33.222 subscription: 0042: "scan" subscribing to mux "11526H", weight: 5, adapter: "Availink AVL6862 : DVB-S #0", network: "13E", service: "Raw PID Subscription" 2016-11-04 22:44:43.315 mpegts: 11526H in 13E - scan no data, failed 2016-11-04 22:44:43.315 subscription: 0042: "scan" unsubscribing 2016-11-04 22:44:43.315 mpegts: 11526H in 13E - tuning on Availink AVL6862 : DVB-S #0 2016-11-04 22:44:43.317 tbl-eit: 11526H in 13E: registering mux eit 2016-11-04 22:44:43.318 subscription: 0045: "scan" subscribing to mux "11526H", weight: 5, adapter: "Availink AVL6862 : DVB-S #0", network: "13E", service: "Raw PID Subscription" 2016-11-04 22:44:48.656 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 474 [e=Operation not permitted] 2016-11-04 22:44:48.656 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 475 [e=Operation not permitted] 2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 476 [e=Operation not permitted] 2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 477 [e=Operation not permitted] 2016-11-04 22:44:48.657 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to config dmx for pid 521 [e=Operation not permitted] 2016-11-04 22:44:53.315 mpegts: 11526H in 13E scan complete 2016-11-04 22:44:53.315 subscription: 0045: "scan" unsubscribing 20
"failed to config dmx..." means this kind of service is unsupported by this receiver. I tested this transponder in my box with 30 scanned services (lot of radios) and status OK. I can watch SRF info HD, SRF 1 HD and SRF 2 HD.
here had the same problem
OpenELEC 5 with DVB-S2 - WeTek Community Forum
Can You please explain me what kind of problem for you causing this warning message?
Final results of the scan FAIL
Final results of the scan FAIL
2016-11-04 22:44:53.315 mpegts: 11526H in 13E scan complete
means scan OK.
FAIL scan has message:
2016-11-04 22:44:43.315 mpegts: 11526H in 13E - scan no data, failedvery much transporters is fail because I do not have all the channels hotbrid 13E
2016-11-04 23:01:45.777 mpegts: 12731H in 13E - scan no data, failed
2016-11-04 23:01:35.767 mpegts: 12692H in 13E - scan no data, failed
2016-11-04 22:39:12.064 mpegts: 10723H in 13E - scan no data, failed
2016-11-04 22:39:22.165 mpegts: 10775H in 13E - scan no data, failed
2016-11-04 22:39:32.275 mpegts: 10853H in 13E - scan no data, failed
2016-11-04 22:39:52.275 mpegts: 10815H in 13E - scan no data, failed
2016-11-04 22:48:03.165 mpegts: 12539.02H in 13E - scan no data, failed
2016-11-04 22:48:13.237 mpegts: 11919V in 13E - scan no data, failed
2016-11-04 22:57:01.818 mpegts: 12322H in 13E - scan no data, failed
very much transporters is fail because I do not have all the channels hotbrid 13E2016-11-04 23:01:45.777 mpegts: 12731H in 13E - scan no data, failed - UHD
2016-11-04 23:01:35.767 mpegts: 12692H in 13E - scan no data, failed
2016-11-04 22:39:12.064 mpegts: 10723H in 13E - scan no data, failed - [font]wrong frequency [/font](lyngsat.com)
2016-11-04 22:39:22.165 mpegts: 10775H in 13E - scan no data, failed - Central Asia
2016-11-04 22:39:32.275 mpegts: 10853H in 13E - scan no data, failed
2016-11-04 22:39:52.275 mpegts: 10815H in 13E - scan no data, failed - Russian channels
2016-11-04 22:48:03.165 mpegts: 12539.02H in 13E - scan no data, failed - unused transponder
2016-11-04 22:48:13.237 mpegts: 11919V in 13E - scan no data, failed
2016-11-04 22:57:01.818 mpegts: 12322H in 13E - scan no data, failed - Russia, Kurdistan
It is impossible to receive all transponders from Hotbird, becaase every transponders has its own beam direction and can hapend it is out of your country. Also UHD is still not correctrly supported and at last check parameters for transporder. In downloaded database is lot of wrong values.
2016-11-04 23:05:58.229 mpegts: 11508V in 13E - scan no data, failed - TVN24HD
TVN 24 HD - parametry odbioru, reception info, frequency - SATELLITE Charts
And so many other TP has a problem
Anyone with the information how to configure NAS as PVR storage in tvheadend?
i tested vitmod v2 rc6 with k2pro.dtb and replace rc6 enigma2 folder usr/lib/enigma2 with rc5 enigma2. the broken gui fixed. dvbs2 working well. i attached here some pictures. i use LAN Nework for internet.Use KODI first to telnet and ftp, use client like PuTTY, SSH, SFTP, WinSCP. User:root Pass:root.
here from someone:
For someone is looking for Enigma2 running on K1 Plus & K2 Pro. I already modified an image from Vitmod RC6. Its all works fine in Enigma2. Channel can scan very well. GUI already fix. But still looking for OSCAM. I already upload to my server but for your information its 3.7GB because it its an image backup from 4GB Sdcard. Here is the link:- K1 Plus Vitmod RC6 (Modification) Version: K1PlusRC7.img K2 Pro Vitmod RC6 (Modification) Version: K2ProRC7.img Thanks to Vitaly for great works. I hope @Vitaliy_S can make an OSCAM-emu working with Enigma2.
hi
for enigma i found a openpli for s905
" sd image: MEGA
you need to copy your proper dtb into boot partition as boot.dtb. You can find it at device_trees
If you have odroidC2 you need to revert back the boot.ini (I created a special boot.ini for media boxes). If you have a S905 box you can use the toothpick method to boot."
can you add a boot and tuner?
tnks
openpli-enigma2-4-s905.sdcard.img - not working
openpli-enigma2-4-s905.sdcard.img - not working
it boot but black screen
can you change boot fil with rc7?
Update for Tvheadend.
service.tvheadend42-7.0.107.zipRelease notes:
- optimize for K1 Plus and K2 Pro;
- fix for TIMEOUT during mux scanning;
- UHD muxes have issue with NIT (only Fashion 4k on Astrta 19.2E is correctly scanned);
- dvb-t has bug in driver, impossible to fix in tvheadend;
- latest sources for tvheadend, h264 and hevc codecs;
This means that it don't work with dbv-t?
Anyway, the driver work with other backend, so I think that IS POSSIBLE fix it in tvheadend.
William Fanelli
Update for Tvheadend.
service.tvheadend42-7.0.107.zipRelease notes:
- optimize for K1 Plus and K2 Pro;
- fix for TIMEOUT during mux scanning;
- UHD muxes have issue with NIT (only Fashion 4k on Astrta 19.2E is correctly scanned);
- dvb-t has bug in driver, impossible to fix in tvheadend;
- latest sources for tvheadend, h264 and hevc codecs;
I can not download file. File not found
I can not download file. File not found