I know LOL, this thread is over a year old but me too I would like to revive my MK808b+ so if anyone still has the files i would be grateful if you could send them my way
Cheers,
Luc
MK808b plus firmware
-
fantoms -
March 28, 2019 at 2:01 PM -
Thread is Unresolved
-
-
Hi, I'm in the same situation here.. need a copy of the LibreELEC S808B+ firmware please
-
My HD18Q image from the LE 9.2 branch can be used on the MK808B+, but unfortunately bluetooth won't work.
If this doesn't bother you, you can find the image here: http://libreelec.dtech.hu/S805/
Related topic:
-
Brilliant, thanks
I don't really need Bluetooth, so that will be no problem. -
My HD18Q image from the LE 9.2 branch can be used on the MK808B+
hey dude thanks for that! I had one in a box from donkies years ago and just updated from 7.90beta4 lol
it still has an openelec splash screen on boot, any idea how to get rid of that?
and even though it says CEC connected on startup it doesn't recognise my Samsung remote?
thanks again!
-
it still has an openelec splash screen on boot, any idea how to get rid of that?
Well, that's very interesting, because the LibreELEC logo is part of the initramfs, which is in the kernel.img.
If you are running LE from an sd card, please enter this command under SSH:
Codemd5sum /flash/kernel.imgIf you do not get this result: ec3c1d0e0774093d2eabf6deb599f28f, the update failed for some reason.
(But if you are running LE from NAND, this command will not work, because there is no kernel.img under the "flash" mount point.)
and even though it says CEC connected on startup it doesn't recognise my Samsung remote?
Try to enable CEC manually in uboot:
Codefw_setenv cecconfig cec1fThen restart the box...
-
dtech no sd card, I must have had openelec on there before I installed libreelec and I think it's getting the openeelec logo in something like 'bootloader config' before kodi even loads?
where do I find the uboot settings?
cheers
-
dtech no sd card, I must have had openelec on there before I installed libreelec and I think it's getting the openeelec logo in something like 'bootloader config' before kodi even loads?
where do I find the uboot settings?
cheers
Can I get a dmesg and an fw_printenv output?
-
Code
Display More1080ioutputheight=1047 1080ioutputwidth=1863 1080ioutputx=28 1080ioutputy=16 576ioutputheight=559 576ioutputwidth=699 576ioutputx=10 576ioutputy=8 720poutputheight=667 720poutputwidth=1185 720poutputx=47 720poutputy=26 baudrate=115200 bootcmd=run storeboot bootdelay=1 bootfile=boot.img bootm_low=0x00000000 bootm_size=0x80000000 bootpath=u-boot.bin bootsize=100000 bootstart=0 cecconfig=cec0 chipname=8726m8 console=ttyS0,115200n8 cvbs_drv=0 cvbsmode=576cvbs digitaudiooutput=PCM display_bpp=24 display_color_bg=0 display_color_fg=0xffff display_color_format_index=24 display_height=1080 display_layer=osd2 display_width=1920 ethaddr=00:15:18:01:81:31 fb_addr=0x7900000 fb_height=720 fb_width=1280 firstboot=1 gatewayip=10.18.9.1 get_dt=checkhw has.accelerometer=false hdmimode=720p hostname=arm_m8 initargs=init=/init console=ttyS0,115200n8 no_console_suspend storage=1 initrd_high=60000000 ipaddr=10.18.9.97 loadaddr=0x12000000 loadaddr_logo=0x13000000 mmcargs=setenv bootargs console=${console} boardname=m8_board netmask=255.255.255.0 normalsize=400000 normalstart=1000000 outputmode=720p p0path=uImage p0size=400000 p0start=1000000 p1path=android.rootfs p1size=8000000 p1start=1400000 partnum=2 preboot=if itest ${upgrade_step} == 3; then run prepare; run storeargs; run update; fi; if itest ${upgrade_step} == 1; then defenv; setenv upgrade_step 2; saveenv;fi; run prepare;run storeargs;get_rebootmode; clear_rebootmode; echo reboot_mode=${reboot_mode};run update_key; run switch_bootmode preloaddtb=imgread dtb boot ${loadaddr} prepare=logo size ${outputmode}; video open; video clear; video dev open ${outputmode};imgread res logo ${loadaddr_logo}; unpackimg ${loadaddr_logo}; logo source ${outputmode}; bmp display ${bootup_offset}; bmp scale; recovery=echo enter recovery;if mmcinfo; then if fatload mmc 0 ${loadaddr} recovery.img; then bootm;fi;fi; if usb start 0; then if fatload usb 0 ${loadaddr} recovery.img; then bootm; fi;fi;if imgread kernel recovery ${loadaddr}; then bootm; else echo no recovery in flash; fi; sdc_burning=sdc_burn ${sdcburncfg} sdcburncfg=aml_sdc_burn.ini serverip=10.18.9.113 store=1 storeargs=setenv bootargs ${initargs} cvbsdrv=${cvbs_drv} vdaccfg=${vdac_config} logo=osd1,loaded,${fb_addr},${outputmode},full hdmimode=${hdmimode} cvbsmode=${cvbsmode} androidboot.firstboot=${firstboot} hdmitx=${cecconfig} storeboot=echo Booting...; if unifykey get usid; then setenv bootargs ${bootargs} androidboot.serialno=${usid};fi;imgread kernel boot ${loadaddr};bootm;run recovery switch_bootmode=if test ${reboot_mode} = factory_reset; then run recovery;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} = usb_burning; then run usb_burning;else if test ${wipe_data} = failed; then echo wipe_data=${wipe_data}; run recovery;else fi;fi;fi;fi testaddr=0x12400000 update=run usb_burning; if mmcinfo; then if fatexist mmc 0 ${sdcburncfg}; then run sdc_burning; else if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;run recovery;fi;else run recovery;fi; update_key=saradc open 0; if saradc get_in_range 0 0x50; then msleep 50; if saradc get_in_range 0 0x50; then echo update by key...; run update; fi;fi upgrade_step=2 usb_burning=update 1000 vdac_config=0x10 video_dev=tvout wipe_data=successand....file attached
thanks!
-
Everything looks good from the kernel side, I think the boot logo has been replaced by a custom ROM. If you can tolerate to see the OE logo appear on startup, you don’t have to deal with it because it doesn’t affect anything. However, if this bothers you, you will need to restore the factory Android ROM (this will restore the boot logo) and then install the LibreELEC image from the SD card to the NAND (with installtointernal script).
And to make CEC work, the fw_setenv cecconfig cec1f I wrote earlier must be run, because fw_printenv says it's still turned off:
Codececconfig=cec0
