I have been looking to get 60HZ working on my new Intel NUC and have been doing alot of research into the steps to get the option added via running lines of code in xrandr and adding them to to autostart.sh but i have had zero luck getting the 60HZ option to work...
does anyone else have a NUC8i3 or similar and has gotten 60HZ working and would be willing to give me a hand to get mine working?
any help would be appreciated
I have tried adding
- xrandr --newmode "3840x2160p60" 593.41 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
- xrandr --addmode DP1 3840x2160p60
with no luck just a black screen when i select 59.94Hz that shows up
my xrandr output with the above lines added to autostart.sh is
/storage$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 1220mm x 680mm
3840x2160 30.00 + 25.00 24.00 29.97 23.98
4096x2160 24.00 23.98
1920x1080 60.00* 50.00 59.94 30.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
2880x576 50.00
1600x900 60.00
2880x480 60.00 59.94
1280x1024 60.02
1152x864 75.00
1280x720 60.00 50.00 30.00 59.94 29.97 24.00 23.98
1440x576 50.00
1024x768 60.00
1440x480 60.00 59.94
800x600 60.32
720x576 50.00
720x480 60.00 59.94
640x480 60.00 59.94
3840x2160p60 59.94
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
and without the lines in autostart.sh is
/storage$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DP1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 1220mm x 680mm
3840x2160 30.00*+ 25.00 24.00 29.97 23.98
4096x2160 24.00 23.98
1920x1080 60.00 50.00 59.94 30.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
2880x576 50.00
1600x900 60.00
2880x480 60.00 59.94
1280x1024 60.02
1152x864 75.00
1280x720 60.00 50.00 30.00 59.94 29.97 24.00 23.98
1440x576 50.00
1024x768 60.00
1440x480 60.00 59.94
800x600 60.32
720x576 50.00
720x480 60.00 59.94
640x480 60.00 59.94
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If all else fails i plan to go get a USB-C (DP) to HDMI 2.0a adapter that supports 4k at 60HZ as i have read that it tends to work without any modification, obviously i would much rather not have to buy another cable if it is not needed..
